Претраживање
Приказ резултата 11-20 од 73
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
Local brittle zones (LBZ) cause the unstable fracture behaviour of weld metals. This threatens the safe service of welded structures and makes structural assessment procedures difficult. Therefore, the unstable fracture ...
Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams
(Elsevier Science Inc, New York, 2002)
In consideration of the very high energy consumption of drying processes it is astonishing and disadvantageous that the majority of industrial dryers are offered and operated without energy recovery. The avoidance of fouling ...
Plane strain fracture toughness of MP35N in aged and unaged conditions measured using modified CT specimens
(Elsevier Science Sa, Lausanne, 2003)
The multiphase alloy MP35N (35% Ni, 35% Co, 10% Mo, 20% Cr) is a high strength, high toughness alloy of choice for several safety-critical applications in aerospace, oil drilling, and biomedical industries. Several previous ...
Model analysis of bucket wheel excavator SchRs 630 strength
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
The possibilities of testing real constructions are often limited, especially in case of large constructions. The idea of model testing is to create a sub-scaled model in order to anticipate the behavior of the real ...
Fracture properties of multiphase alloy MP35N
(Elsevier Science Sa, Lausanne, 2003)
This paper addresses the fracture properties of commercially cold-drawn (53%) MP35N (35% Co, 35% Ni, 20% Cr, and 10% Mo) in both the cold-worked and the cold-worked and aged conditions. MP35N is a superalloy that exhibits ...
Compressive strains and displacement in a partially dentate lower jaw rehabilitated with two different treatment modalities
(Wiley, Hoboken, 2012)
Background: Understanding of the biomechanical consequences of the stresses generated to the supporting bone during occlusal loading is significant for improving the design and clinical planning process in partial edentulism ...
Experimental studies on active vibration control of a smart composite beam using a PID controller
(IOP Publishing Ltd, Bristol, 2013)
This paper presents experimental verification of the active vibration control of a smart cantilever composite beam using a PID controller. In order to prevent negative occurrences in the derivative and integral terms in a ...
Active boundary layer control in linear cascades using CFD and artificial neural networks
(Elsevier France-Editions Scientifiques Medicales Elsevier, Issy-Les-Moulineaux, 2014)
Flow field in linear cascades under high subsonic/transonic conditions has been investigated numerically. Active boundary layer control was employed in the form of sources (jets) distributed across the upper surface of the ...
Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition
(Elsevier Sci Ltd, Oxford, 2014)
The ZA-27 alloy is a zinc-aluminium casting alloy that has been frequently used as the material for sleeves of plain bearings. It has good physical, mechanical and tribological properties. However, one of the major ...
Free vibration control of smart composite beams using particle swarm optimized self-tuning fuzzy logic controller
(Academic Press Ltd- Elsevier Science Ltd, London, 2014)
This paper deals with active free vibrations control of smart composite beams using particle-swarm optimized self-tuning fuzzy logic controller. In order to improve the performance and robustness of the fuzzy logic controller, ...