Претраживање
Приказ резултата 81-90 од 91
Comparison of experimental, numerical and analytical risk assessment of oil drilling rig welded pipe based on fracture mechanics parameters
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
Fracture mechanics parameters are used for experimental, numerical and analytical risk assessment of structural integrity and life of oil drilling rig welded pipe with a crack. As a simple analytical tool, the Failure ...
A contribution to the optimal numbering of a ring structure
(Computers and Structures, 1988)
An optimal element numbering of a pipeline system containing rings is considered. In order to minimize the front width two possible cases of ring structure are analysed and solved in different manners. An example is shown ...
Fatigue crack paths in light aircraft wing spars
(Elsevier Sci Ltd, Oxford, 2019)
Different cracks paths in three different wing spar designs are analysed (differential, integral and optimized integral) to explore how those cracks paths affect fatigue life estimation. First, numerical analysis was carried ...
Ergonomic design of crane cabin interior: The path to improved safety
(Elsevier Science Bv, Amsterdam, 2015)
Many procedures in the development process of crane cabins today are still based on the specific experience of manufacturers and historical guidelines. It is not surprising that they fail to meet the needs of a large ...
Fatigue crack growth in locking compression plates
(Elsevier Sci Ltd, Oxford, 2022)
Fatigue crack growth in orthopaedic locking compression plates (LCP), under four-point bending, has been simulated by the extended finite element method (xFEM) to assess LCP optimal geometry in respect to remaining life. ...
Ductile-to-brittle transition of ferritic steels: A historical sketch and some recent trends
(Engineering Fracture Mechanics, 2023)
The phenomenon of ductile-to-brittle transition in ferritic steels has been a ubiquitous research challenge for the last 50 years. The characterization of this problem using the fracture mechanics concept, from the earliest ...
Evaluation of true stress-strain diagrams for welded joints by application of Digital Image Correlation
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
Digital Image Correlation (DIC) is applied to evaluate stress-strain diagrams for welded joints in two different ways. The first one is based on the measures strains along the welded joint, including all 3 zones of interest, ...
Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials
(Engineering Fracture Mechanics, 2023)
In order to develop a non-standard method for determining the resistance to fracture and damage of pipeline materials, a new geometry of ring-shaped specimens with sharp notches or cracks has been defined. The need to ...
Numerical Analysis of NOx Control by Combustion Modifications in Pulverized Coal Utility Boiler
(Amer Chemical Soc, Washington, 2012)
Considerable research efforts focus on modeling NOx formation/destruction and predicting NOx emission so that it can be controlled. A motivation for this numerical study was to examine the efficiency of combustion modifications ...
Bucket wheel failure caused by residual stresses in welded joints
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Cracks in the welded joints on the bucket wheel (BW) body of the bucket wheel excavator (BWE) SRs 1300 were discovered after merely 1800 h of operation. Investigations are carried out in order to detect the causes of cracks ...