Pretraživanje
Prikaz rezultata 41-50 od 50
Possibilities of predicting the behaviour of ferrite-austenite welded joints in pressure equipment during exploitation
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
Exploitation safety of pressure equipment depends, among other factors, on the possibility of predicting the behaviour of each of its components during exploitation. If the safety of analysis is oriented towards materials ...
Experimental and Numerical Analysis of Fatigue Crack Growth in Integral Skin-Stringer Panels
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
Experimental and numerical analysis of fatigue crack growth in integral skin-stringer panels, produced by means of laser beam welding (LBW), is performed. Since this type of panel is used in airframe construction, fatigue ...
Evaluation of the Locking Compression Plates Stress-Strain Fields
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
Locking Compression Plates (LCP) have found application in the orthopaedic healing process in modern medicine. Their design is specifically modified depending on the bone and the loading the specific bone is subjected to. ...
Fatigue Life Estimation of Damaged Integral Wing Spar Using XFEM
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
This paper presents the application of the extended finite element method (XFEM) in crack propagation simulation on the integral wing spar that should replace existing differential spar of the light aircraft UTVA 75. ...
Risk Management of a Hydro Power Plant - Fracture Mechanics Approach
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
Risk management of a hydro power plant has been analysed from fracture mechanics point of view. The research is focused on the risk and integrity assessment of pressure equipment in a reversible hydro power plant in order ...
Stress Analysis of Steel Structure Comprising Cylindrical Shell with Billboard Tower
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
In accordance with EN1993-1-1, in the definition of element classes, the tubular cross section elements are considered as class 3 for cross section that respects the relation: d/t lt = 90 epsilon(2). If for any cross ...
The effect of cracks on stress state in crane wheel hard-surface under contact loading
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
Shown in this paper are the results of microstructure testing of crane wheels, along with the repair welding procedure performed by hard-surfacing. Repair welding involved the application of a welded layer to the crane ...
Damage tolerance analysis of structural components under general load spectrum
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2012)
In this investigation fatigue behaviour of damaged structural components under cyclic loads constant amplitude and load spectrum is considered. Primary attention of this investigation is the establishment of computation ...
Crack Growth Rate Analysis of Stress Corrosion Cracking
(Univ Osijek, Tech Fac, Slavonski Brod, 2021)
A theoretical film rupture model was used for computational procedure to predict the crack growth rate within the Stress Corrosion Cracking (SCC) conditions. Chemical, electrochemical and mechanical aspects of the SCC were ...
Numerical and experimental determination of stress concentration factor for a pipe branch model
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
The subject of this paper is testing of complex geometrical structures, i.e. stress analysis of a pipe branch model of A6 third pipeline at Hydropower Plant Perucica, Niksic. Analysis of pipe branch model stress distribution ...