Pretraživanje
Prikaz rezultata 31-40 od 86
Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron
(Korean Inst Metals Materials, Seoul, 2014)
The aim of the paper was to investigate the effect of austempering parameters (time and temperature) on the microstructure and mechanical properties of ADI alloyed with 1.5% Cu and 1.6% Ni (in wt.%) in order to establish ...
Experimental studies on active vibration control of smart plate using a modified PID controller with optimal orientation of piezoelectric actuator
(Sage Publications Ltd, London, 2016)
This paper presents a design, development and experimental verification of an active vibration control system of aluminum plate. The active structure consists of an aluminum rectangular plate as the host structure, strain ...
An attempt to create a standardized (reference) model for experimental investigations on implant's sample
(Elsevier Sci Ltd, Oxford, 2015)
The aim of this study was to determine, evaluate and measure strain of vertically loaded implant using the digital image correlation method. The Straumann (R) dental implant system with the SLActive (R) surface was used ...
Geometry, mechanical and ballistic properties of ADI material perforated plates
(Elsevier Sci Ltd, Oxford, 2015)
In this paper, austempered ductile iron has been evaluated as an alternative to steel for perforated plates applied in the ballistic protection of military vehicles. The austempering was performed in lower and higher ...
Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength
(MDPI, Basel, 2016)
The paper presents a study on the surface modifications of nickel based superalloy Nimonic 263 induced by laser shock peening (LSP) process. The process was performed by Nd3+:Yttrium Aluminium Garnet (YAG) picosecond laser ...
Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
(Elsevier Sci Ltd, Oxford, 2017)
This paper describes fatigue crack growth in a friction stir welded T joints made of aluminum alloy A2024-T351 under three point bending loads. For this purpose, three dimensional homogeneous isotropic model is used to ...
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module - Part 1: Presentation of test section and 3D CFD model
(Elsevier Science Sa, Lausanne, 2015)
This paper deals with cooling of the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module (HCPB TBM) for ITER. The first wall cooling is an important investigation issue due to an extreme asymmetry of heat loads: ...
Fracture assessment of seam and seamless steel pipes by application of the ring-shaped bending specimens
(Elsevier, Amsterdam, 2019)
The topic of this work is analysis of fracture behaviour and resistance of the thin-walled seamless and seam steel pipes, through application of the recently proposed ring-shaped specimen (PRNB - Pipe Ring Notched Bend). ...
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module Part 2: Presentation of results
(Elsevier Science Sa, Lausanne, 2015)
This paper is the continuation of the first report on investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module for ITER submitted to this Journal (see Ilic et al. [ID. The investigations ...
Optimal vibration control of smart composite beams with optimal size and location of piezoelectric sensing and actuation
(Sage Publications Ltd, London, 2013)
Control performances of smart structures depend on the size and location of the piezoelectric actuators and sensors as well as on the applied control algorithm. This article presents optimal vibration control of a thin-walled ...