Search
Now showing items 31-40 of 51
Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks-Experimental Design Methodology
(Springer International Publishing Ag, Cham, 2019)
The utilization of construction and demolition waste materials for the radionuclide immobilization by sorption processes was investigated. Given that the liquid radioactive waste usually has a complex composition and that ...
The Effect of Vanadium Content on Microstructure and Impact Toughness of Forged High Alloy Steel X96CrMo12-1
(Springer International Publishing Ag, Cham, 2019)
The aim of this research was to examine the influence of vanadium on the structure and impact toughness of the forged high alloy steel X96CrMo12-1. It is known that vanadium affects the process of solidification of this ...
Parametric optimization of the aluminium nanocomposites wear rate
(Springer Heidelberg, Heidelberg, 2019)
The optimization of wear rate of the nanocomposites with A356 aluminium alloy matrix, reinforced with silicon carbide nanoparticles, was performed through the analysis of the following influences: wt% of the reinforcement, ...
Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles
(Springer London Ltd, London, 2019)
The influence of SiC microparticles reinforcement and graphite macroparticles addition on the friction and wear characteristics of A356 Al-Si alloys, produced by compocasting, has been assessed using a pin-on-disc tribometer. ...
Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage
(Springer Heidelberg, Heidelberg, 2021)
A multidisciplinary research method was employed with the intention to create a series of bio-inspired flattened airfoils, observe their aerodynamic characteristics, and analyse their applicability to small devices or to ...
CFD Calculation of Helicopter Tail Rotor Airloads for Fatigue Strength Experiments
(Asce-Amer Soc Civil Engineers, Reston, 2017)
This work focuses on defining loads and fatigue life estimation of helicopter tail rotor blades. The original metal construction of these blades was replaced with a new construction of blades made from composite materials. ...
Determining the crack acceptability in the welded joints of a wind loaded cylindrical steel shell structure
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
Engineering critical assessment can be considered as a mandatory request in the civil engineering designing and manufacturing process. The paper is presenting the procedure for determination of crack acceptability based ...
Effect of material heterogeneity and constraint conditions on ductile fracture resistance of welded joint zones - Micromechanical assessment
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
The topic of this work is assessment of ductile fracture initiation and development in different zones of welded joint of a high strength low alloyed (HSLA) steel. A combined experimental-numerical procedure is applied for ...
Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor
(Wiley-V C H Verlag Gmbh, Weinheim, 2020)
The paper analyses the corrosion behaviour of naturally and artificially aged AA2024 alloy in NaCl solution and in the presence of an environment-friendly corrosion inhibitor, CeCl3. On the basis of the values of polarisation ...
The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners
(Elsevier, Amsterdam, 2021)
Clear dental aligners are used for treating orthodontic anomalies (misaligned teeth, inappropriate contact between upper and lower teeth etc.), minor irregularities and bruxism. Using additive manufacturing technologies ...