Pretraživanje
Prikaz rezultata 11-20 od 23
Compatibility of fracture mechanics parameters and fatigue crack growth parameters in welded joint behaviour evaluation
(Strojarski Facultet, 2013)
Problem of fracture toughness, K-Ic, determination on a crack tip localized in a welded joint is set in principle, since fracture mechanics presumes homogeneous material, not only in a crack tip surrounding but on a distance ...
Integrity and Life Assessment Procedure for a Reactor
(Elsevier Science Bv, Amsterdam, 2019)
Integrity and life assessment of structural elements or structures subjected to variable loads is necessary in order to define the control interval and removal of damages that occurred during exploitation. Integrity and ...
Risk based analysis of temperature and time effects on brittle fracture of A-387 Gr. B welded joint
(Elsevier Science Bv, Amsterdam, 2019)
Risk based analysis of temperature and time effects on fracture toughness values is applied to different regions of a welded joint made of low-alloyed Cr-Mo steel A-387 Gr. B, designed for high temperature applications. ...
Relation between impact and fracture toughness of A-387 Gr. B welded joint
(Elsevier Science Bv, Amsterdam, 2019)
The influence of temperature on impact and fracture toughness values in different regions of a welded joint is analysed for low-alloyed Cr-Mo steel A-387 Gr. B, designed for high temperature applications. Standard Charpy ...
Determination of Residual Fatigue Life of Welded Structures at Bucket-Wheel Excavators through the Use of Fracture Mechanics
(Elsevier Science Bv, Amsterdam, 2018)
This paper presents a methodological approach for the assessment of service life of vital welded structures of a bucket-wheel excavator Sch Rs 650/5x24 ('Thyssen Krupp', Germany) boom, subjected to cyclic loading with a ...
Influence of temperature on fracture toughness values in different regions of A-387 Gr. B welded joint
(Elsevier Science Bv, Amsterdam, 2019)
The influence of temperature on fracture toughness values in different regions of a welded joint is analysed low-alloyed Cr-Mo steel A-387 Gr. B, designed for high temperature applications. Heterogeneity of microstructure ...
Repair of cracks detected in cast components of vertical kaplan turbine rotor hub
(Institut za ispitivanje materijala, Beograd, 2019)
During the revitalization of the hydroelectric generating station A4 at the hydro power plant 'Djerdap 1', all of its parts are subjected to non-destructive testing. Cracks are detected in cast part of generator rotor hub, ...
Structural integrity analysis of a cracked pressure vessel
(Institut za ispitivanje materijala, Beograd, 2021)
Stress distribution, as obtained by finite element method (FEM), and corresponding fracture mechanics parameters, have been used for the integrity assessment of a pressure vessel. Once the stress distribution is known, the ...
Uticaj ispitivanja probnim pritiskom na nastanak i rast prslina u zavarenim spojevima opreme pod pritiskom / Probe testing effect on crack initiation and growth in pressureized equipment welded joints
(Univerzitet u Beogradu, Mašinski fakultet, 2018)
Predmet doktorske disertacije je analiza problema vezanih za inicijaciju i rast prslina u zavarenim spojevima opreme pod pritiskom tokom procesa ispitivanja pritiskom, kao i utvrđivanje matematičkih modela i procedura ...
Impact of temperature and exploitation time on plane strain fracture toughness, k-ic, in a welded joint
(Institut za ispitivanje materijala, Beograd, 2017)
This paper presents the analysis of the impact of temperature and exploitation time on the tendency toward brittle fracture of welded joint constituents of new and exploited low-alloyed Cr-Mo steel A-387 Gr. B, by using ...