Претраживање
Приказ резултата 1-10 од 75
Digital Image Correlation Analysis of Vertically Loaded Cylindrical Ti-Implants With Straight and Angled Abutments
(Springer, New York, 2016)
The purpose of this study was to investigate the influence of the abutment angulation upon the strain distribution pattern for the vertical loading situation by means of the digital image correlation (DIC) method. In ...
Possibility of Reducing the Overpressure of Shock Wave of Powder Gases around the Mortar
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
This paper resulted from the research of the overpressure of the shock wave of the powder gases, which occurs during firing of the mortar. Work encompasses modeling and computation of the overpressure field. Increasing ...
Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments
(Taylor & Francis Ltd, Abingdon, 2016)
Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data ...
A Heat Conduction and Convection Analytical Benchmark for Adjoint Solution Verification of Computational Fluid Dynamics Codes Used in Reactor Design
(Amer Nuclear Soc, La Grange Pk, 2016)
This work presents a heat transport benchmark problem when modeling the steady-state radial conduction in a fuel rod coupled to the axial heat convection in a coolant surrounding the rod and flowing along it. This benchmark ...
Analysis of the strain and hardness in self-cured and light-cured self-adhesive resin based cement
(Taylor & Francis Ltd, Abingdon, 2019)
The study showed an application of the 3 D Digital Image Correlation Method (3 D-DIC) for detection of von Mises strain in samples of the self-etch, self-adhesive resin based cement (RBC). The aim was to determine and ...
Ductile fracture prediction of steam pipeline steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
Considering the conditions to which steels used for the manufacture of steam pipelines are exposed, the micromechanism of their destruction in exploitation is exclusively the ductile one. In order to make an estimation of ...
Derivation of Elastic Constants for Orthotropic Plates
(Korean Soc Steel Construction-Kssc, Seoul, 2020)
The paper presents a procedure for modeling an orthotropic thin plate finite element so to have an equivalent structural response as the steel stiffened plate of same overall dimensions. New, equivalent element, homogenizes ...
XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring
(Springer, New York, 2019)
The numerical analysis of the behaviour of a pressure vessel with a reinforcement ring subjected to both static and dynamic load is presented in this paper. This research was based on a previous analysis which involved ...
Determination of Archard's wear coefficient and wear simulation of sliding bearings
(Emerald Group Publishing Ltd, Bingley, 2019)
Purpose This paper aims to present the methodology to determine Archard's wear coefficient. By applying this coefficient into the numerical simulation of wear, it is possible to predict wear without long lasting and usually ...
Environmental protection: reducing the co2 emissions in intermodal transport planning
(Parlar Scientific Publications, 2020)
International shipping is still the most important transportation method. Besides the uncountable benefits, ships have a considerable role on environment. Greenhouse gas emissions is the most negative effects of freight ...