Претраживање
Приказ резултата 1-10 од 10
Characterization of dispersion strengthened copper with 3wt%Al2O3 by mechanical alloying
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2004)
The copper matrix has been dispersion strengthened with 3wt. %Al2O3 by mechanical alloying. Commercial alumina powder with an average particle size of 0.751 mum was used for alloying. The mechanical alloying process was ...
Numerical Modeling of the Porosity Influence on the Elastic Properties of Sintered Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
The effect of structural porosity on the elastic properties of sintered materials was studied using the new multi pore unit cell numerical model - MPUC. Comparison between proposed MPUC model and previously adopted two-phase ...
The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
The paper analyzes the morphology of cavitation damage of raw and sintered basalt samples. The experiment was conducted using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. During the ...
Numerical Evaluation of the Elastic Properties of Carbon Fiber Reinforced Composite Material at Elevated and Lowered Temperatures
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2021)
The effect of elevated and lowered temperatures on the elastic properties of carbon fiber-epoxy composite material was studied using multi-phase unit cell (MPUC) numerical model. Evaluation of the elastic properties of ...
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...
Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens
(International Institute for the Science of Sintering, 2022)
This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Science of Sintering, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
Developing thermal insulation cement based mortars with recycled aggregate in accordance with Net Zero principles
(Science of Sintering, 2024)
The performance of thermo insulation rendering mortars with alternations in ratios
of powdered cordierite and talc was examined. The goal was to confirm that recycled
kilnware cordierite can be reapplied in the mortar ...
Influence of Mechanical Activation of a Cordierite –Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings
(Science of Sintering, 2019)
For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of ...
The influence of printing orientation on the flexural strength of PA 12 specimens produced by SLS
(Science of Sintering, 2023)
This article aims to investigate the mechanical characteristics of specimens fabricated using Selective Laser Sintering technology. The research covers flexural specimens, produced by PA12 materials. CAD model dimensions ...