Претраживање
Приказ резултата 1-8 од 8
Ion Channel Modeling beyond State of the Art: A Comparison with a System Theory-Based Model of the Shaker-Related Voltage-Gated Potassium Channel Kv1.1
(MDPI, Basel, 2022)
The mathematical modeling of ion channel kinetics is an important tool for studying the electrophysiological mechanisms of the nerves, heart, or cancer, from a single cell to an organ. Common approaches use either a ...
Effect of material heterogeneity and testing temperature on fatigue behaviour of Cr-Mo steel welded joints
(Elsevier Ltd, 2022)
Successful application of Cr-Mo steel depends crucially on behaviour of all zones in welded joints, i.e. base metal (BM), heat-affected-zone (HAZ) and weld metal (WM), both at room and working temperature. Different amplitude ...
Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
(MDPI, Basel, 2022)
In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical ...
Fatigue life assessment of orthopedic plates made of Ti6Al4V
(Pergamon-Elsevier Science Ltd, Oxford, 2022)
This study is aimed to analyse fatigue life of orthopedic plates due to cracks initiated in the stress concentration areas. Material used for this analysis was typical orthopedic alloy, Ti-6Al-4V, strong but not very ...
A scaling approach to size effect modeling of J(c) CDF for 20MnMoNi55 reactor steel in transition temperature region
(Pergamon-Elsevier Science Ltd, Oxford, 2022)
Ever since the 1980s there is a sustained interest in the size effect, as one of the most pronounced consequences of fracture mechanics. In the present study, the investigation of the size effect is focused on estimation ...
Experimental and numerical evaluation of fracture characteristics of composite material used in the aircraft engine cover manufacturing
(Pergamon-Elsevier Science Ltd, Oxford, 2022)
The aircraft industry is a leading industry in terms of the implementation of new materials and technologies. In the development of a light aircraft several different materials were considered for the engine cover design ...
The Effect of Material Heterogeneity and Temperature on Impact Toughness and Fracture Resistance of SA-387 Gr. 91 Welded Joints
(MDPI, Basel, 2022)
This paper presents the analysis of the behavior of welded joints made of 9-12% Cr-Mo steel SA-387 Gr. 91. The successful application of this steel depends not only on the base metal's (BM) properties but even more on ...
The effects of welded clips on fatigue crack growth in AA6156 T6 panels
(Elsevier Ltd, 2022)
Fatigue crack growth in different panels, made of AA6156 T6, was investigated experimentally and numerically. Three different types of panels were used, simple one, so-called base metal (BM), panel with 4 welded stringers ...