Fatigue life assessment of orthopedic plates made of Ti6Al4V
Само за регистроване кориснике
2022
Аутори
Sedmak, AleksandarVučetić, Filip
Čolić, Katarina
Grbović, Aleksandar
Sedmak, Simon
Kirin, Snežana
Berto, Filippo
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This study is aimed to analyse fatigue life of orthopedic plates due to cracks initiated in the stress concentration areas. Material used for this analysis was typical orthopedic alloy, Ti-6Al-4V, strong but not very ductile, meaning also sensivite to cracking, as indicated by its mechanical properties, such as tensile strength, impact toughness and fracture toughness, as well as by high fatigue crack rate, all of them tested and analysed here. Extended finite element method (XFEM) in ANSYS software was used for simulating the fatigue crack growth in 5 orthopedic plates with different geometries. Results for crack length and stress intensity factor vs. number of cycles are given, indicating plate D as the best option regarding residual life. Crack paths are analysed in all 5 plates to explain such a behaviour, indicating benefits of initial crack growth into length, followed by growth into depth. Also, the effect of geometry of plates is considered to explain differences in life predic...tions for 5 different plates.
Извор:
Engineering Failure Analysis, 2022, 137Издавач:
- Pergamon-Elsevier Science Ltd, Oxford
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200213 (Иновациони центар Машинског факултета у Београду доо) (RS-MESTD-inst-2020-200213)
DOI: 10.1016/j.engfailanal.2022.106259
ISSN: 1350-6307
WoS: 000803798200002
Scopus: 2-s2.0-85127309461
Институција/група
Inovacioni centarTY - JOUR AU - Sedmak, Aleksandar AU - Vučetić, Filip AU - Čolić, Katarina AU - Grbović, Aleksandar AU - Sedmak, Simon AU - Kirin, Snežana AU - Berto, Filippo PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3710 AB - This study is aimed to analyse fatigue life of orthopedic plates due to cracks initiated in the stress concentration areas. Material used for this analysis was typical orthopedic alloy, Ti-6Al-4V, strong but not very ductile, meaning also sensivite to cracking, as indicated by its mechanical properties, such as tensile strength, impact toughness and fracture toughness, as well as by high fatigue crack rate, all of them tested and analysed here. Extended finite element method (XFEM) in ANSYS software was used for simulating the fatigue crack growth in 5 orthopedic plates with different geometries. Results for crack length and stress intensity factor vs. number of cycles are given, indicating plate D as the best option regarding residual life. Crack paths are analysed in all 5 plates to explain such a behaviour, indicating benefits of initial crack growth into length, followed by growth into depth. Also, the effect of geometry of plates is considered to explain differences in life predictions for 5 different plates. PB - Pergamon-Elsevier Science Ltd, Oxford T2 - Engineering Failure Analysis T1 - Fatigue life assessment of orthopedic plates made of Ti6Al4V VL - 137 DO - 10.1016/j.engfailanal.2022.106259 ER -
@article{ author = "Sedmak, Aleksandar and Vučetić, Filip and Čolić, Katarina and Grbović, Aleksandar and Sedmak, Simon and Kirin, Snežana and Berto, Filippo", year = "2022", abstract = "This study is aimed to analyse fatigue life of orthopedic plates due to cracks initiated in the stress concentration areas. Material used for this analysis was typical orthopedic alloy, Ti-6Al-4V, strong but not very ductile, meaning also sensivite to cracking, as indicated by its mechanical properties, such as tensile strength, impact toughness and fracture toughness, as well as by high fatigue crack rate, all of them tested and analysed here. Extended finite element method (XFEM) in ANSYS software was used for simulating the fatigue crack growth in 5 orthopedic plates with different geometries. Results for crack length and stress intensity factor vs. number of cycles are given, indicating plate D as the best option regarding residual life. Crack paths are analysed in all 5 plates to explain such a behaviour, indicating benefits of initial crack growth into length, followed by growth into depth. Also, the effect of geometry of plates is considered to explain differences in life predictions for 5 different plates.", publisher = "Pergamon-Elsevier Science Ltd, Oxford", journal = "Engineering Failure Analysis", title = "Fatigue life assessment of orthopedic plates made of Ti6Al4V", volume = "137", doi = "10.1016/j.engfailanal.2022.106259" }
Sedmak, A., Vučetić, F., Čolić, K., Grbović, A., Sedmak, S., Kirin, S.,& Berto, F.. (2022). Fatigue life assessment of orthopedic plates made of Ti6Al4V. in Engineering Failure Analysis Pergamon-Elsevier Science Ltd, Oxford., 137. https://doi.org/10.1016/j.engfailanal.2022.106259
Sedmak A, Vučetić F, Čolić K, Grbović A, Sedmak S, Kirin S, Berto F. Fatigue life assessment of orthopedic plates made of Ti6Al4V. in Engineering Failure Analysis. 2022;137. doi:10.1016/j.engfailanal.2022.106259 .
Sedmak, Aleksandar, Vučetić, Filip, Čolić, Katarina, Grbović, Aleksandar, Sedmak, Simon, Kirin, Snežana, Berto, Filippo, "Fatigue life assessment of orthopedic plates made of Ti6Al4V" in Engineering Failure Analysis, 137 (2022), https://doi.org/10.1016/j.engfailanal.2022.106259 . .