Претраживање
Приказ резултата 1-10 од 362
The development and application of the new methodology for conveyor idlers fits testing
(Elsevier Science Bv, Amsterdam, 2018)
The proper interference fit between the joined parts is a prerequisite for an effective pressure joint. The main purpose of the pressure joint is to transfer tangential, radial and axial loads between the joined parts. In ...
Analysis of the effect of implant distance from the surrounding structure, in the PMMA block model
(Elsevier Science Bv, Amsterdam, 2016)
Strain analysis in the vicinity of the dental implants were the subject of many research papers. In this study, new experimental method was employed for strain determination in the surrounding area of the axially loaded ...
Oxidation behavior during prolonged service of boiler tubes made of 2.25Cr1Mo and 12Cr1Mo0.3V heat resistance steels
(Elsevier Science Bv, Amsterdam, 2016)
During service of thermal power plant (TPP) units, different components are exposed to high temperature due to technological cycle of TPP unit. Service lifetimes of these components, especially boiler heating surfaces, may ...
Model analysis of complex structures - advantages of physical sub-scaled model testing and shortcomings in physical model production
(Elsevier Science Bv, Amsterdam, 2018)
The possibilities of testing real constructions strength are often limited, especially in case of large constructions. Testing on the model, instead of the actual construction, results in a great saving of money and time. ...
Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals
(Elsevier Science Bv, Amsterdam, 2018)
The present paper describes numerical and experimental methodology and development of the model for stress and deformation state analysis of the connecting lug of container terminals. Numerical analysis was conducted by ...
Polymerization mechanics of dental composites - Advantages and Disadvantages
(Elsevier Science Bv, Amsterdam, 2016)
Dental composite materials which are used as tooth fillings have numerous advantages and disadvantages in comparison to previously used alternative materials. Effects of polymerization shrinkage (light curing) of composite ...
Comparative computation of cylindrical shells loaded by external pressure according to srps and asme standards
(Sopot : Scientific Association for Development and Affirmation of New Technologies, 2015)
This paper give area of application of SRPS M. E2.254:1991 and ASME standards for calculating thickness of cylindrical shell subjected to external pressure. It is shown the design of a vertical cylindrical pressure vessel ...
Plasma transferred arc hardfacing with 316L
(National R & D Institute For Welding And Material Testing - ISIM Timisoara, Romania, 2015)
The parts of machines and structures are often exposed to
the action of aggressive corrosive environments, which in a
short period of time can provoke the loss of their integrity. It
is well known that for extending ...
Application of an economizer for waste heat recovery in a 1415 kwe cogeneration plant
(Sopot : Scientific association for development and affirmation of new technologies, 2015)
Increase of energy cost has required its more effective use. However, many industrial heating processes generate waste energy. Use of waste-heat recovery systems decreases energy consumption. This paper presents case study ...
BIM, MEP and Sustainability Evaluation
(Novi Sad : Faculty of Technical Sciences, 2012)
Sustainable design and its premise of eliminating negative environmental impact of built environment require information-rich design application with ability to iterate and analyze faster than traditionally. Software ...