Претраживање
Приказ резултата 11-20 од 39
Transition temperature and fracture mode of as-castand austempered ductile iron
(Wiley, Hoboken, 2008)
The ductile to brittle transition temperature is a very important criterion that is used for selection of materials in some applications, especially in low-temperature conditions. For that reason, in this paper transition ...
The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy
(Elsevier Sci Ltd, Oxford, 2006)
Production of investment castings of titanium alloys was considerably increased during last years due to the significant cost savings compared to complicated machined parts. However, the disadvantage of as-cast titanium ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...
The austempering study of alloyed ductile iron
(Elsevier Sci Ltd, Oxford, 2006)
Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can ...
A computer code for the prediction of mill gases and hot air distribution between burners' sections at the utility boiler
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
One of the main tasks during the design or simulation and analyses of the utility steam boiler operation is the prediction of a distribution of mill gases and hot air flow rates between burners' sections. These are the ...
Ductile crack growth initiation in welded joints - Micromechanical approach
(Welding in the World, 2008)
The integrity of welded structures depends on the load-carrying capacities of their welded joints. Having in mind that welding process produces a large microstructural gradient through the weld, resulting in variation of ...
Defining the memory function for tension and deformation of linear textile products on the basis of their rheological models
(Industria Textila, 2009)
Defining the memory function for tension and deformation of linear textile products on the basis of their rheological models On the basis of rheological models for yarn elongation, which have been set out for three different ...
Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept
(Taylor & Francis Inc, Philadelphia, 2009)
In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) is developed to investigate DEMO relevant concepts ...
Failure analysis of the end eye connection of the bucket wheel excavator portal tie-rod support
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
This paper describes the failure analysis results of the bucket wheel excavator (BWE) portal tie-rod support. The results of finite elements analysis (FEA) point out the occurrence of pronounced stress concentration, whereby ...
Microstructure and toughness of CuNiMo austempered ductile iron
(Elsevier, Amsterdam, 2004)
The effect of austempering on the microstructure and toughness of nodular cast iron (designated as CuNiMoSG) alloyed with molybdenum, copper, nickel, and manganese has been studied. Light microscopy (LM), scanning electron ...