Претраживање
Приказ резултата 181-190 од 206
Thermohydraulic experimental design for the European Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2008)
The peculiarities of the coolant flow in Helium-Cooled-Pebble-Bed Test Blanket Module (TBM) are (i) very intensive heating of the first wall from the plasma side and (ii) very complicated geometry of How domain consisting ...
Environmental, social and other non-profit impacts Of mountain streams usage as Renewable energy resources
(Technical Institute of Bijeljina Republic of Srpska - Bosnia and Herzegovina, 2023)
The main subject of this manuscript is mountain streams used by construction of small hydro power plants. The motivation for this research stemmed from a number of conflicting opinions about the justification of the ...
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
(Springer, 2023)
Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
Mathematical modeling and experimental investigation of a composite beam failure - Case study
(London : Sage Publications Ltd, 2023)
Composite materials have been extensively employed in the aviation industry in recent years. The application of new materials enables significant weight savings with improved mechanical characteristics. This is also very ...
Crack Growth Rate Analysis of Stress Corrosion Cracking
(Univ Osijek, Tech Fac, Slavonski Brod, 2021)
A theoretical film rupture model was used for computational procedure to predict the crack growth rate within the Stress Corrosion Cracking (SCC) conditions. Chemical, electrochemical and mechanical aspects of the SCC were ...
Application of Composite Construction and Demolition Debris in Heavy Metals Removal from Industrial Wastewater
(Thermal Science, 2023)
The utilization of construction and demolition debris in industrial wastewater treatment by sorption of Co2+ and Ni2+ ions was investigated. Selected waste composites are cost-effective and locally available, still their ...
The characteristics of combustion process of diesel engine using vegetable oil methyl esters
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2015)
Biodiesel is one of the promising renewable, alternative, and environmentally friendly biofuels that can be used in Diesel engine with little or no modification in the engine. The present paper investigates the combustion ...
Thermal history and stress state of a fresh steam-pipeline influencing its remaining service life
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2011)
The service life of thick-walled power plant components exposed to creep, as is the case with pipelines of fresh- and reheated steam, depend on the exhaustion rate of the material. Plant operation at elevated temperatures ...
Manufacturing parameter influence on FDM polypropylene tensile properties
(Journal of Mechanical Science and Technology, 2023)
Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic ...