Pretraživanje
Prikaz rezultata 81-90 od 91
A contribution to the optimal numbering of a ring structure
(Computers and Structures, 1988)
An optimal element numbering of a pipeline system containing rings is considered. In order to minimize the front width two possible cases of ring structure are analysed and solved in different manners. An example is shown ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
Local brittle zones (LBZ) cause the unstable fracture behaviour of weld metals. This threatens the safe service of welded structures and makes structural assessment procedures difficult. Therefore, the unstable fracture ...
A computer code for the prediction of mill gases and hot air distribution between burners' sections at the utility boiler
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
One of the main tasks during the design or simulation and analyses of the utility steam boiler operation is the prediction of a distribution of mill gases and hot air flow rates between burners' sections. These are the ...
Efficient helium cooling methods for nuclear fusion devices: Status and prospects
(Elsevier Science Sa, Lausanne, 2009)
Helium-cooled reactors offer several important advantages as the helium is an inert and neutron transparent gas. compatible with high outlet temperatures and all structural and functional materials considered for plasma ...
Ductile-to-brittle transition of ferritic steels: A historical sketch and some recent trends
(Engineering Fracture Mechanics, 2023)
The phenomenon of ductile-to-brittle transition in ferritic steels has been a ubiquitous research challenge for the last 50 years. The characterization of this problem using the fracture mechanics concept, from the earliest ...
Evaluation of true stress-strain diagrams for welded joints by application of Digital Image Correlation
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
Digital Image Correlation (DIC) is applied to evaluate stress-strain diagrams for welded joints in two different ways. The first one is based on the measures strains along the welded joint, including all 3 zones of interest, ...
Numerical Analysis of NOx Control by Combustion Modifications in Pulverized Coal Utility Boiler
(Amer Chemical Soc, Washington, 2012)
Considerable research efforts focus on modeling NOx formation/destruction and predicting NOx emission so that it can be controlled. A motivation for this numerical study was to examine the efficiency of combustion modifications ...
Microstructure and fracture of alloyed austempered ductile iron
(Elsevier Science Inc, New York, 2006)
An investigation has been conducted on two austempered ductile irons alloyed with Cu and Cu+Ni, austenitized at 900 degrees C and austempered at 350 degrees C. The microstructure and fracture mode developed through these ...
Selective laser sintered Pipe Ring Notched Tension specimens for examination of fracture properties of pipeline materials
(Engineering Fracture Mechanics, 2023)
In order to develop a non-standard method for determining the resistance to fracture and damage of pipeline materials, a new geometry of ring-shaped specimens with sharp notches or cracks has been defined. The need to ...