Претраживање
Приказ резултата 51-60 од 86
Integrity assessment and determination of residual fatigue life of vital parts of bucket-wheel excavator operating under dynamic loads
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper are presented results of tests and analyses of complex dynamic loads carried out on the bucket-wheel excavator SchRs 650/5x24 Krupp, as well as assessment of service life of vital welded structures of a ...
Design of capacitive voltage divider for measuring ultrafast voltages
(Elsevier Sci Ltd, Oxford, 2018)
The aim of this paper is to consider and analyze design of capacitive voltage divider for measuring ultrafast voltage occurrence. Measuring pulse voltages by means of a capacitive divider in nanosecond range is affected ...
Hydrogen Embrittlement of Industrial Components: Prediction, Prevention, and Models
(Natl Assoc Corrosion Eng, Houston, 2016)
Hydrogen embrittlement is a common, dangerous, and poorly understood cause of failure in many metal alloys. In practice, it is observed that different types of damage to industrial components have been tied to the presence ...
Life Cycle Impact Assessment of Miscanthus Crop for Sustainable Household Heating in Serbia
(MDPI, Basel, 2018)
This paper investigates the environmental impacts and energy benefits of the cultivation of Miscanthus (Miscanthus x giganteus Greef et Deu.), in order to initiate its use in sustainable household heating in the Republic ...
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Component failures due to the hydrogen embrittlement (HE) were observed in different industrial systems, including high-pressure hydrogen storage tanks, aircraft components, high-strength alloy components, and high-strength ...
Multi-objective design optimization strategies for small-scale vertical-axis wind turbines
(Springer, New York, 2016)
Extracting energy from wind has been an interesting and serious topic over the last few decades and a lot of work has been done on the subject. This paper discusses in detail possible approaches to optimization of a somewhat ...
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module Part 2: Presentation of results
(Elsevier Science Sa, Lausanne, 2015)
This paper is the continuation of the first report on investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module for ITER submitted to this Journal (see Ilic et al. [ID. The investigations ...
Free vibration control of smart composite beams using particle swarm optimized self-tuning fuzzy logic controller
(Academic Press Ltd- Elsevier Science Ltd, London, 2014)
This paper deals with active free vibrations control of smart composite beams using particle-swarm optimized self-tuning fuzzy logic controller. In order to improve the performance and robustness of the fuzzy logic controller, ...
Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron
(Korean Inst Metals Materials, Seoul, 2014)
The aim of the paper was to investigate the effect of austempering parameters (time and temperature) on the microstructure and mechanical properties of ADI alloyed with 1.5% Cu and 1.6% Ni (in wt.%) in order to establish ...
Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
(Elsevier Sci Ltd, Oxford, 2017)
This paper describes fatigue crack growth in a friction stir welded T joints made of aluminum alloy A2024-T351 under three point bending loads. For this purpose, three dimensional homogeneous isotropic model is used to ...