Претраживање
Приказ резултата 21-30 од 34
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module Part 2: Presentation of results
(Elsevier Science Sa, Lausanne, 2015)
This paper is the continuation of the first report on investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module for ITER submitted to this Journal (see Ilic et al. [ID. The investigations ...
Hydrogen damage of steels: A case study and hydrogen embrittlement model
(Pergamon-Elsevier Science Ltd, Oxford, 2015)
Many efforts have been made to understand the effects of hydrogen on steels, resulting in an abundance of theoretical models and papers. However, a fully developed and practically applicable predictive physical model still ...
Anthropometric assessment of crane cabins and recommendations for design: A case study
(IOS Press, Amsterdam, 2015)
BACKGROUND: Work of crane operators is very difficult and demanding. Therefore, it is very important that the cabin of a crane be designed on the basis of relevant anthropometric data. However, it is very difficult to find ...
The influence of illumination parameters on the performances of color sorting machines
(Scientific Proceedings XII International Congress "Machines, Technologies, Materials" 2015, 2015)
The color recorded in the image is not an inherent value of observed object, because it is also influenced by the illumination properties, as well as geometry and surfaces of neighboring objects. Numerous studies have ...
Fe and Ni coatings used for wear protection of blinds
(Belgrade : Scientific association for development and affirmation of new technologies, 2015)
In this paper are shown the current problems of thermal power plants and cost effective solutions. Theaim of the research includes exploring of repair welding procedures, metallization and new materials high withresistance ...
Metalizacija velikim brzinama u struji produkata sagorevanja - HVOF
(Belgrade : Singidunum University, 2015)
Service life extension of machine parts and equipment are increasingly being based on protection of certain, particularly endangered areas, by applying the coating. In order to increase the resistance of mechanical parts, ...
Microstructural characterization of WC and CrC based coatings applied by different processes
(Associations of Metallurgical Engineers of Serbia - AMES, 2015)
Numerous mechanical structures and assemblies have frequent outages
because of wear of machine parts due to the effects of abrasion and erosion.
There are several methods to protect parts from wear and one of them is ...
3D profiling of 12Cr heat resistante steel charpy V noch fracture surface obtained at different temperatures
(Faculty of Mechanical Engineering, University of Belgrade, 2015)
Characterization of metal degradation after prolonged
service is necessary for evaluating component
exhaustion and its remaining service capability.
Martensitic steel X20CrMoV 12.1 has
been extensively used as a material ...
Ergonomic design of crane cabin interior: The path to improved safety
(Elsevier Science Bv, Amsterdam, 2015)
Many procedures in the development process of crane cabins today are still based on the specific experience of manufacturers and historical guidelines. It is not surprising that they fail to meet the needs of a large ...
Application of an economizer for waste heat recovery in a 1415 kwe cogeneration plant
(Sopot : Scientific association for development and affirmation of new technologies, 2015)
Increase of energy cost has required its more effective use. However, many industrial heating processes generate waste energy. Use of waste-heat recovery systems decreases energy consumption. This paper presents case study ...