Pretraživanje
Prikaz rezultata 31-39 od 39
Prof. Ivan Petrovic, PhD, M. Arch (1932-2000)
(Elsevier, Amsterdam, 2002)
New modular concept for the helium cooled pebble bed test blanket module for ITER
(Elsevier Science Sa, Lausanne, 2005)
Starting from the latest European design of the HCPB blanket for the DEMO a test blanket module for ITER has been deduced. The paper describes the new design and presents the rational of the design choices and the results ...
Crystallographic orientations of Ni3Al-based aluminide
(Elsevier Science Inc, New York, 2000)
Inverse pole figures have been plotted to determine preferred crystallographic orientations in a powder-compacted Ni3Al aluminide prealloyed with Fe, Ti and B. The main textural components, although weak, were noticeably ...
The influence of microstructure on ductile fracture initiation in low-alloyed steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
In this paper the quantitative microstructural analysis of low-alloyed pressure vessel steel has been discussed. The values of volume fraction and mean free path of non-metallic inclusions determined in that way were used ...
Nanoscale magnetic Behavior of C-60 thin films in earth magnetic field under polarization light influences
(Taylor & Francis Inc, Philadelphia, 2005)
Magnetic behavior of C-60 thin films in the Earths magnetic field under polarization light influence is presented. Transformation of magnetic field for two fullerene thin films of different thickness is investigated. Two ...
Ductile fracture prediction of steam pipeline steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
Considering the conditions to which steels used for the manufacture of steam pipelines are exposed, the micromechanism of their destruction in exploitation is exclusively the ductile one. In order to make an estimation of ...
Microstructure and fracture of alloyed austempered ductile iron
(Elsevier Science Inc, New York, 2006)
An investigation has been conducted on two austempered ductile irons alloyed with Cu and Cu+Ni, austenitized at 900 degrees C and austempered at 350 degrees C. The microstructure and fracture mode developed through these ...
Application of Complete Gurson Model for prediction of ductile fracture in welded steel joints
(Trans Tech Publications Ltd, 2009)
Ductile fracture process includes three stages: void nucleation, their growth and coalescence. The voids nucleate due to the fracture or separation of non-metallic inclusions and secondary-phase particles from the material ...
An Approach to the Optimization of a Thin-walled Z-beam
(Strojniski Vestnik/Journal of Mechanical Engineering, 2009)
One approach to the optimization of a thin-walled open section Z-beam subjected to bending and to the constrained torsion is considered. For given loads, material and geometrical characteristics the problem is reduced to ...