TY  - CONF
AU  - Trajković, Isaak
AU  - Joksimović, Aleksandra
AU  - Ilić, Uroš
AU  - Djurović, Marko
AU  - Lukić, Tijana
AU  - Lazarević, Jovana
AU  - Milošević, Miloš
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5928
AB  - In this paper the influence of sample infill on the flexural strength will be presented. Plate and
pipe-shaped specimens were tested by three-point bending according to the ISO 178:2019
standard. Samples were produced using ABS material with the inclusion of an unknown filler
designated as X. The infill during the production of samples was 50% and 100%, while all
other parameters such as printing temperature, bed temperature, nozzle width, printing
speed and layer height, were the same for both types of samples. Samples were printed
vertically, which does not actually refer to the mechanical properties of the material itself, but
to the influence of the amount of infill on the strength of the bond between the layers. The
tests were performed on a Shimadzu AGS-Ks 100kN universal machine. Test results indicate a
significant influence of the infill on the bond strength between the layers and thus on the
flexural strength of the samples. Further research will be carried out to measure the influence
of samples treatment with acetone on their flexural strength.
PB  - Faculty of Mechanical Engineering (FME), Univ. of Belgrad
C3  - 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022
T1  - Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5928
ER  - 

@conference{
author = "Trajković, Isaak and Joksimović, Aleksandra and Ilić, Uroš and Djurović, Marko and Lukić, Tijana and Lazarević, Jovana and Milošević, Miloš",
year = "2022",
abstract = "In this paper the influence of sample infill on the flexural strength will be presented. Plate and
pipe-shaped specimens were tested by three-point bending according to the ISO 178:2019
standard. Samples were produced using ABS material with the inclusion of an unknown filler
designated as X. The infill during the production of samples was 50% and 100%, while all
other parameters such as printing temperature, bed temperature, nozzle width, printing
speed and layer height, were the same for both types of samples. Samples were printed
vertically, which does not actually refer to the mechanical properties of the material itself, but
to the influence of the amount of infill on the strength of the bond between the layers. The
tests were performed on a Shimadzu AGS-Ks 100kN universal machine. Test results indicate a
significant influence of the infill on the bond strength between the layers and thus on the
flexural strength of the samples. Further research will be carried out to measure the influence
of samples treatment with acetone on their flexural strength.",
publisher = "Faculty of Mechanical Engineering (FME), Univ. of Belgrad",
journal = "3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022",
title = "Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5928"
}

Trajković, I., Joksimović, A., Ilić, U., Djurović, M., Lukić, T., Lazarević, J.,& Milošević, M.. (2022). Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material. in 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022
Faculty of Mechanical Engineering (FME), Univ. of Belgrad..
https://hdl.handle.net/21.15107/rcub_machinery_5928

Trajković I, Joksimović A, Ilić U, Djurović M, Lukić T, Lazarević J, Milošević M. Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material. in 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_5928 .

Trajković, Isaak, Joksimović, Aleksandra, Ilić, Uroš, Djurović, Marko, Lukić, Tijana, Lazarević, Jovana, Milošević, Miloš, "Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material" in 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022 (2022),
https://hdl.handle.net/21.15107/rcub_machinery_5928 .