TY  - CONF
AU  - Elek, Predrag
AU  - Đorđević, Miroslav
AU  - Marković, Miloš
AU  - Jevtić, Dejan
AU  - Đurović, Radovan
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7075
AB  - Characterization of behind armor debris (BAD) is of utmost importance from the aspect of evaluation of an armor piercing projectile efficiency, as well as from the point of target vulnerability. The focus of the study is on the size, shape, total number, mass and velocity of fragments generated from the target plate. The experimental results of perforation of 6.35 mm thick steel plates by 12.7 mm armor-piercing projectile have been reported. Projectile impact and residual velocity were measured by the muzzle velocity radar system and make-up screens, respectively. The mass and shape distribution of a generated BAD cloud and its energetic properties were determined using the calibrated witness pack. The proposed analytical model of the problem is based on the energy conservation, fracture mechanics and fragmentation theory. A good agreement is observed between calculated results and experimental data in terms of the shape, characteristic size, mass and velocity distribution of generated fragments.
PB  - DESTech Publications, Inc.
C3  - 33rd International Symposium on Ballistics, Bruges, Belgium, 16-20 October 2023
T1  - Experimental and analytical study of behind armor debris after perforation of a steel plate by an AP projectile
SP  - pp. 1726-1737
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7075
ER  - 

@conference{
author = "Elek, Predrag and Đorđević, Miroslav and Marković, Miloš and Jevtić, Dejan and Đurović, Radovan",
year = "2023",
abstract = "Characterization of behind armor debris (BAD) is of utmost importance from the aspect of evaluation of an armor piercing projectile efficiency, as well as from the point of target vulnerability. The focus of the study is on the size, shape, total number, mass and velocity of fragments generated from the target plate. The experimental results of perforation of 6.35 mm thick steel plates by 12.7 mm armor-piercing projectile have been reported. Projectile impact and residual velocity were measured by the muzzle velocity radar system and make-up screens, respectively. The mass and shape distribution of a generated BAD cloud and its energetic properties were determined using the calibrated witness pack. The proposed analytical model of the problem is based on the energy conservation, fracture mechanics and fragmentation theory. A good agreement is observed between calculated results and experimental data in terms of the shape, characteristic size, mass and velocity distribution of generated fragments.",
publisher = "DESTech Publications, Inc.",
journal = "33rd International Symposium on Ballistics, Bruges, Belgium, 16-20 October 2023",
title = "Experimental and analytical study of behind armor debris after perforation of a steel plate by an AP projectile",
pages = "pp. 1726-1737",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7075"
}

Elek, P., Đorđević, M., Marković, M., Jevtić, D.,& Đurović, R.. (2023). Experimental and analytical study of behind armor debris after perforation of a steel plate by an AP projectile. in 33rd International Symposium on Ballistics, Bruges, Belgium, 16-20 October 2023
DESTech Publications, Inc.., pp. 1726-1737.
https://hdl.handle.net/21.15107/rcub_machinery_7075

Elek P, Đorđević M, Marković M, Jevtić D, Đurović R. Experimental and analytical study of behind armor debris after perforation of a steel plate by an AP projectile. in 33rd International Symposium on Ballistics, Bruges, Belgium, 16-20 October 2023. 2023;:pp. 1726-1737.
https://hdl.handle.net/21.15107/rcub_machinery_7075 .

Elek, Predrag, Đorđević, Miroslav, Marković, Miloš, Jevtić, Dejan, Đurović, Radovan, "Experimental and analytical study of behind armor debris after perforation of a steel plate by an AP projectile" in 33rd International Symposium on Ballistics, Bruges, Belgium, 16-20 October 2023 (2023):pp. 1726-1737,
https://hdl.handle.net/21.15107/rcub_machinery_7075 .

TY  - CONF
AU  - Elek, Predrag
AU  - Jaramaz, Slobodan
AU  - Micković, Dejan
AU  - Đorđević, Miroslav
AU  - Miloradović, Nenad
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4591
AB  - Characterization of behind armor debris (BAD) is of utmost importance from the aspect of evaluation of an armor piercing projectile efficiency as well as from the point of target vulnerability. In the present study, the research focus is on the size, mass and shape distribution of fragments generated from the target plate. The experimental results of perforation of 6.35 mm thick steel plates by 12.7 mm armor-piercing projectile have been reported. Projectile impact and residual velocity were measured by the muzzle velocity radar system and make-up screens, respectively. Distribution of a generated BAD cloud and its energetic properties were determined using the calibrated witness pack. The proposed analytical model of the problem is based on the energy conservation, fracture mechanics and fragmentation theory. A good agreement is observed between calculated results and experimental data in terms of the shape, characteristic size and mass distribution of generated fragments. The further research will be focused on the spatial distribution of fragments, as well as on the distribution of their velocities.
PB  - Belgrade : Military Technical Institute
C3  - 7th International Conference on Defensive Technologies - OTEH 2016, Belgrade, 6-7 October 2016
T1  - Characterization of behind armor debris after perforation of steel plates by armor piercing projectile
EP  - 277
SP  - 272
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4591
ER  - 

@conference{
author = "Elek, Predrag and Jaramaz, Slobodan and Micković, Dejan and Đorđević, Miroslav and Miloradović, Nenad",
year = "2016",
abstract = "Characterization of behind armor debris (BAD) is of utmost importance from the aspect of evaluation of an armor piercing projectile efficiency as well as from the point of target vulnerability. In the present study, the research focus is on the size, mass and shape distribution of fragments generated from the target plate. The experimental results of perforation of 6.35 mm thick steel plates by 12.7 mm armor-piercing projectile have been reported. Projectile impact and residual velocity were measured by the muzzle velocity radar system and make-up screens, respectively. Distribution of a generated BAD cloud and its energetic properties were determined using the calibrated witness pack. The proposed analytical model of the problem is based on the energy conservation, fracture mechanics and fragmentation theory. A good agreement is observed between calculated results and experimental data in terms of the shape, characteristic size and mass distribution of generated fragments. The further research will be focused on the spatial distribution of fragments, as well as on the distribution of their velocities.",
publisher = "Belgrade : Military Technical Institute",
journal = "7th International Conference on Defensive Technologies - OTEH 2016, Belgrade, 6-7 October 2016",
title = "Characterization of behind armor debris after perforation of steel plates by armor piercing projectile",
pages = "277-272",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4591"
}

Elek, P., Jaramaz, S., Micković, D., Đorđević, M.,& Miloradović, N.. (2016). Characterization of behind armor debris after perforation of steel plates by armor piercing projectile. in 7th International Conference on Defensive Technologies - OTEH 2016, Belgrade, 6-7 October 2016
Belgrade : Military Technical Institute., 272-277.
https://hdl.handle.net/21.15107/rcub_machinery_4591

Elek P, Jaramaz S, Micković D, Đorđević M, Miloradović N. Characterization of behind armor debris after perforation of steel plates by armor piercing projectile. in 7th International Conference on Defensive Technologies - OTEH 2016, Belgrade, 6-7 October 2016. 2016;:272-277.
https://hdl.handle.net/21.15107/rcub_machinery_4591 .

Elek, Predrag, Jaramaz, Slobodan, Micković, Dejan, Đorđević, Miroslav, Miloradović, Nenad, "Characterization of behind armor debris after perforation of steel plates by armor piercing projectile" in 7th International Conference on Defensive Technologies - OTEH 2016, Belgrade, 6-7 October 2016 (2016):272-277,
https://hdl.handle.net/21.15107/rcub_machinery_4591 .