TY  - CONF
AU  - Trišović, Nataša
AU  - Li, Wei
AU  - Jeremić, Olivera
AU  - Ristić, Ognjen
AU  - Sedak, Miloš
AU  - Petrović, Ana
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7183
AB  - Structural design optimization for dynamic behavior is crucial for structures reliant on their dynamic characteristics for operational performance and integrity.
PB  - Trans Tech Publications
C3  - 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland
T1  - Sensitivity Analysis in Dynamic Systems: Exploring Insights
EP  - 113
SP  - 113
VL  - 2
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7183
ER  - 

@conference{
author = "Trišović, Nataša and Li, Wei and Jeremić, Olivera and Ristić, Ognjen and Sedak, Miloš and Petrović, Ana",
year = "2023",
abstract = "Structural design optimization for dynamic behavior is crucial for structures reliant on their dynamic characteristics for operational performance and integrity.",
publisher = "Trans Tech Publications",
journal = "9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland",
title = "Sensitivity Analysis in Dynamic Systems: Exploring Insights",
pages = "113-113",
volume = "2",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7183"
}

Trišović, N., Li, W., Jeremić, O., Ristić, O., Sedak, M.,& Petrović, A.. (2023). Sensitivity Analysis in Dynamic Systems: Exploring Insights. in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland
Trans Tech Publications., 2, 113-113.
https://hdl.handle.net/21.15107/rcub_machinery_7183

Trišović N, Li W, Jeremić O, Ristić O, Sedak M, Petrović A. Sensitivity Analysis in Dynamic Systems: Exploring Insights. in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland. 2023;2:113-113.
https://hdl.handle.net/21.15107/rcub_machinery_7183 .

Trišović, Nataša, Li, Wei, Jeremić, Olivera, Ristić, Ognjen, Sedak, Miloš, Petrović, Ana, "Sensitivity Analysis in Dynamic Systems: Exploring Insights" in 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME), the Book of Abstracts, 2023 Trans Tech Publications Ltd, Switzerland, 2 (2023):113-113,
https://hdl.handle.net/21.15107/rcub_machinery_7183 .

TY  - CONF
AU  - Trišović, Nataša
AU  - Li, Wei
AU  - Gavrilović, Marko
AU  - Baneasa Birtok, Corneliu
AU  - Ristić, Ognjen
AU  - Milić, Milica
AU  - Radulovic, Radoslav
AU  - Trišović, Zaga
AU  - Socalici, Ana Virginia
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7739
PB  - Academy of Applied Technical Studies Belgrade
C3  - International scientific and professional conference: "Politehnika 2023"
T1  - Effects of changing design parameters
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7739
ER  - 

@conference{
author = "Trišović, Nataša and Li, Wei and Gavrilović, Marko and Baneasa Birtok, Corneliu and Ristić, Ognjen and Milić, Milica and Radulovic, Radoslav and Trišović, Zaga and Socalici, Ana Virginia",
year = "2023",
publisher = "Academy of Applied Technical Studies Belgrade",
journal = "International scientific and professional conference: "Politehnika 2023"",
title = "Effects of changing design parameters",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7739"
}

Trišović, N., Li, W., Gavrilović, M., Baneasa Birtok, C., Ristić, O., Milić, M., Radulovic, R., Trišović, Z.,& Socalici, A. V.. (2023). Effects of changing design parameters. in International scientific and professional conference: "Politehnika 2023"
Academy of Applied Technical Studies Belgrade..
https://hdl.handle.net/21.15107/rcub_machinery_7739

Trišović N, Li W, Gavrilović M, Baneasa Birtok C, Ristić O, Milić M, Radulovic R, Trišović Z, Socalici AV. Effects of changing design parameters. in International scientific and professional conference: "Politehnika 2023". 2023;.
https://hdl.handle.net/21.15107/rcub_machinery_7739 .

Trišović, Nataša, Li, Wei, Gavrilović, Marko, Baneasa Birtok, Corneliu, Ristić, Ognjen, Milić, Milica, Radulovic, Radoslav, Trišović, Zaga, Socalici, Ana Virginia, "Effects of changing design parameters" in International scientific and professional conference: "Politehnika 2023" (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7739 .

TY  - CONF
AU  - Milić, Milica
AU  - Atanasovska, Ivana
AU  - Ristić, Ognjen
AU  - Momčilović, Dejan B.
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7513
AB  - The high level of worthiness of unmanned aerial vehicles (UAV), particularly in everyday life, is something that will be common thing in close future. The design solutions for UAV us subject of constant innovation, focused on the improving structure performances and weight reducing. The use of new materials. like various composites, is necessary during this process to fulfill such demanding structural design requirements. Despite the fact that such kind of composite made UAV structures are subjected to the detailed calculation procedures and experimental verifications in the design phase, the fracture and failure can occur during testing in real operation conditions. The redesign procedure is required in order to overcome the noted issues.This paper describes failure analysis, as well as structural redesign procedure for a beam element of an unconventional UAV. The fracture analysis is based on the numerical calculations of the deformation and stress state of the element, as well as experimental investigation of material characteristics. The developed redesign solution contains modifications in material of the element, as well as the changes in the structure design of the failure zone. The Finite Element Analysis is performed and discussed for both of the element structures: original design and redesign based on the fracture analysis. The conclusions obtained by the comparison of these Finite Element Analyses show the significant structure improvements in the stress concentration zone, achieved by the proposed redesign.
PB  - University of Belgrade - Faculty of Mechanical Engineering, Belgrade, Serbia
C3  - 1st International Conference on Mathematical Modelling in Mechanics and Engineering Mathematical Institute SANU
T1  - Failure analysis of beam of unmanned aerial vehicle
SP  - 156
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7513
ER  - 

@conference{
author = "Milić, Milica and Atanasovska, Ivana and Ristić, Ognjen and Momčilović, Dejan B.",
year = "2022",
abstract = "The high level of worthiness of unmanned aerial vehicles (UAV), particularly in everyday life, is something that will be common thing in close future. The design solutions for UAV us subject of constant innovation, focused on the improving structure performances and weight reducing. The use of new materials. like various composites, is necessary during this process to fulfill such demanding structural design requirements. Despite the fact that such kind of composite made UAV structures are subjected to the detailed calculation procedures and experimental verifications in the design phase, the fracture and failure can occur during testing in real operation conditions. The redesign procedure is required in order to overcome the noted issues.This paper describes failure analysis, as well as structural redesign procedure for a beam element of an unconventional UAV. The fracture analysis is based on the numerical calculations of the deformation and stress state of the element, as well as experimental investigation of material characteristics. The developed redesign solution contains modifications in material of the element, as well as the changes in the structure design of the failure zone. The Finite Element Analysis is performed and discussed for both of the element structures: original design and redesign based on the fracture analysis. The conclusions obtained by the comparison of these Finite Element Analyses show the significant structure improvements in the stress concentration zone, achieved by the proposed redesign.",
publisher = "University of Belgrade - Faculty of Mechanical Engineering, Belgrade, Serbia",
journal = "1st International Conference on Mathematical Modelling in Mechanics and Engineering Mathematical Institute SANU",
title = "Failure analysis of beam of unmanned aerial vehicle",
pages = "156",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7513"
}

Milić, M., Atanasovska, I., Ristić, O.,& Momčilović, D. B.. (2022). Failure analysis of beam of unmanned aerial vehicle. in 1st International Conference on Mathematical Modelling in Mechanics and Engineering Mathematical Institute SANU
University of Belgrade - Faculty of Mechanical Engineering, Belgrade, Serbia., 156.
https://hdl.handle.net/21.15107/rcub_machinery_7513

Milić M, Atanasovska I, Ristić O, Momčilović DB. Failure analysis of beam of unmanned aerial vehicle. in 1st International Conference on Mathematical Modelling in Mechanics and Engineering Mathematical Institute SANU. 2022;:156.
https://hdl.handle.net/21.15107/rcub_machinery_7513 .

Milić, Milica, Atanasovska, Ivana, Ristić, Ognjen, Momčilović, Dejan B., "Failure analysis of beam of unmanned aerial vehicle" in 1st International Conference on Mathematical Modelling in Mechanics and Engineering Mathematical Institute SANU (2022):156,
https://hdl.handle.net/21.15107/rcub_machinery_7513 .

TY  - CONF
AU  - Momčilović, Dejan B.
AU  - Atanasovska, Ivana
AU  - Ristić, Ognjen
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7538
AB  - Many new requirements in the field of testing of metals, emphasize traceabilityand accuracy of test results as of the end goal. These requirements have hiddencontext with emphasis on energy efficiency too., which is initiated by massproductions and increasing market of end products based on steels for civil engineeringapplications. The noted above move focus on improvements of existingtest methods. The key point in the verification of improvements is a statisticalanalysis of test results. This paper describes one such analysis, based on resultsobtained by application of new insert tool for testing of shear strength of weldedfabric for civil engineering. This paper presents an extensive series of experimentalresults to verify the efficiency of the application of the new insert tool. The obtainedresults justify applications of a new tool insert to reduce data scatter during testingof welded fabric for civil engineering.
PB  - The Association of Metallurgical Engineers of Serbia, Belgrade, Serbia
C3  - Abstracts of Fourth Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), Belgrade, Serbia
T1  - Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design
SP  - 24
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7538
ER  - 

@conference{
author = "Momčilović, Dejan B. and Atanasovska, Ivana and Ristić, Ognjen",
year = "2019",
abstract = "Many new requirements in the field of testing of metals, emphasize traceabilityand accuracy of test results as of the end goal. These requirements have hiddencontext with emphasis on energy efficiency too., which is initiated by massproductions and increasing market of end products based on steels for civil engineeringapplications. The noted above move focus on improvements of existingtest methods. The key point in the verification of improvements is a statisticalanalysis of test results. This paper describes one such analysis, based on resultsobtained by application of new insert tool for testing of shear strength of weldedfabric for civil engineering. This paper presents an extensive series of experimentalresults to verify the efficiency of the application of the new insert tool. The obtainedresults justify applications of a new tool insert to reduce data scatter during testingof welded fabric for civil engineering.",
publisher = "The Association of Metallurgical Engineers of Serbia, Belgrade, Serbia",
journal = "Abstracts of Fourth Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), Belgrade, Serbia",
title = "Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design",
pages = "24",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7538"
}

Momčilović, D. B., Atanasovska, I.,& Ristić, O.. (2019). Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design. in Abstracts of Fourth Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), Belgrade, Serbia
The Association of Metallurgical Engineers of Serbia, Belgrade, Serbia., 24.
https://hdl.handle.net/21.15107/rcub_machinery_7538

Momčilović DB, Atanasovska I, Ristić O. Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design. in Abstracts of Fourth Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), Belgrade, Serbia. 2019;:24.
https://hdl.handle.net/21.15107/rcub_machinery_7538 .

Momčilović, Dejan B., Atanasovska, Ivana, Ristić, Ognjen, "Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design" in Abstracts of Fourth Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019), Belgrade, Serbia (2019):24,
https://hdl.handle.net/21.15107/rcub_machinery_7538 .

TY  - JOUR
AU  - Atanasovska, Ivana
AU  - Momčilović, Dejan B.
AU  - Ristić, Ognjen
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7529
AB  - Many new requirements in the field of experimental mechanics, like testing of metallic materials, emphasize traceability and accuracy of test results as the end goal. These requirements have energy efficiency context too, due to the increase of mass productions of many finished and semi-finished products based on steel metallurgy. Combined, both of the above-noted perspectives impose the need for improvements of some of the existing test methods. This paper describes one such improvement, the developing of the new insert tool for testing of shear strength of the welded fabric, for civil engineering. The developed tool allows repeated testing of welded joints sampled from the welded fabric of different dimensions without tool changes and is generally related with the procedure for the determination of shear strength properties of different sizes of wires used for welded fabric. The construction of the tool insert allows aiming high operation safety and higher accuracy of results, which is described in detail. The paper also presents experimental results and the Finite Element Analysis performed in order to verify the impact of insert tool application on the testing results. The obtained results and conclusion about the possible contributions of the developed insert tool for extensively testing of welded fabric for civil engineering are discussed.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical and Materials Engineering
T1  - The new tool insert design for prevention the rotation of horizontal wire during shear testing of welded fabric
EP  - 170
IS  - 2
SP  - 163
VL  - 25
DO  - 10.30544/425
ER  - 

@article{
author = "Atanasovska, Ivana and Momčilović, Dejan B. and Ristić, Ognjen",
year = "2019",
abstract = "Many new requirements in the field of experimental mechanics, like testing of metallic materials, emphasize traceability and accuracy of test results as the end goal. These requirements have energy efficiency context too, due to the increase of mass productions of many finished and semi-finished products based on steel metallurgy. Combined, both of the above-noted perspectives impose the need for improvements of some of the existing test methods. This paper describes one such improvement, the developing of the new insert tool for testing of shear strength of the welded fabric, for civil engineering. The developed tool allows repeated testing of welded joints sampled from the welded fabric of different dimensions without tool changes and is generally related with the procedure for the determination of shear strength properties of different sizes of wires used for welded fabric. The construction of the tool insert allows aiming high operation safety and higher accuracy of results, which is described in detail. The paper also presents experimental results and the Finite Element Analysis performed in order to verify the impact of insert tool application on the testing results. The obtained results and conclusion about the possible contributions of the developed insert tool for extensively testing of welded fabric for civil engineering are discussed.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical and Materials Engineering",
title = "The new tool insert design for prevention the rotation of horizontal wire during shear testing of welded fabric",
pages = "170-163",
number = "2",
volume = "25",
doi = "10.30544/425"
}

Atanasovska, I., Momčilović, D. B.,& Ristić, O.. (2019). The new tool insert design for prevention the rotation of horizontal wire during shear testing of welded fabric. in Metallurgical and Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 25(2), 163-170.
https://doi.org/10.30544/425

Atanasovska I, Momčilović DB, Ristić O. The new tool insert design for prevention the rotation of horizontal wire during shear testing of welded fabric. in Metallurgical and Materials Engineering. 2019;25(2):163-170.
doi:10.30544/425 .

Atanasovska, Ivana, Momčilović, Dejan B., Ristić, Ognjen, "The new tool insert design for prevention the rotation of horizontal wire during shear testing of welded fabric" in Metallurgical and Materials Engineering, 25, no. 2 (2019):163-170,
https://doi.org/10.30544/425 . .

TY  - PAT
AU  - Atanasovska, Ivana
AU  - Momčilović, Dejan B.
AU  - Timotijević, Dejan
AU  - Ristić, Ognjen
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7495
T1  - Alatni uložak za sprečavanje rotacije poprečne žice pri ispitivanju zavarenih spojeva čeličnih spojeva mreža na smicanje
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7495
ER  - 

@misc{
author = "Atanasovska, Ivana and Momčilović, Dejan B. and Timotijević, Dejan and Ristić, Ognjen",
year = "2019",
title = "Alatni uložak za sprečavanje rotacije poprečne žice pri ispitivanju zavarenih spojeva čeličnih spojeva mreža na smicanje",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7495"
}

Atanasovska, I., Momčilović, D. B., Timotijević, D.,& Ristić, O.. (2019). Alatni uložak za sprečavanje rotacije poprečne žice pri ispitivanju zavarenih spojeva čeličnih spojeva mreža na smicanje. .
https://hdl.handle.net/21.15107/rcub_machinery_7495

Atanasovska I, Momčilović DB, Timotijević D, Ristić O. Alatni uložak za sprečavanje rotacije poprečne žice pri ispitivanju zavarenih spojeva čeličnih spojeva mreža na smicanje. 2019;.
https://hdl.handle.net/21.15107/rcub_machinery_7495 .

Atanasovska, Ivana, Momčilović, Dejan B., Timotijević, Dejan, Ristić, Ognjen, "Alatni uložak za sprečavanje rotacije poprečne žice pri ispitivanju zavarenih spojeva čeličnih spojeva mreža na smicanje" (2019),
https://hdl.handle.net/21.15107/rcub_machinery_7495 .

TY  - JOUR
AU  - Ristić, Slavica
AU  - Ilić, Jelena
AU  - Čantrak, Đorđe
AU  - Ristić, Ognjen R.
AU  - Janković, Novica
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1370
AB  - Laser-Doppler anemometry application in measurements of the 3-D swirl turbulent flow velocity in the cylindrical pipe, behind the axial fan, have been analysed. This paper presents a brief overview of uncertainty sources in the laser-Doppler anemometry measurements. Special attention is paid to estimation of laser-Doppler anemometry measuring volume positioning in cylindrical pipe flow due to optical aberrations, caused by the pipe wall curvature. The hypothesis, that in the central part of the pipe (r/R  lt  0.6) exists a small, or negligible pipe wall influence on laser- -Doppler anemometry measuring position, is investigate. The required corrections, for measurements of axial, tangential, and radial velocity components such: shift of measuring volume and its orientation are analyzed and determined for used test rig and for some other pipe geometries.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Estimation of laser-Doppler anemometry measuring volume displacement in cylindrical pipe flow
EP  - 1042
IS  - 4
SP  - 1027
VL  - 16
DO  - 10.2298/TSCI1204027R
ER  - 

@article{
author = "Ristić, Slavica and Ilić, Jelena and Čantrak, Đorđe and Ristić, Ognjen R. and Janković, Novica",
year = "2012",
abstract = "Laser-Doppler anemometry application in measurements of the 3-D swirl turbulent flow velocity in the cylindrical pipe, behind the axial fan, have been analysed. This paper presents a brief overview of uncertainty sources in the laser-Doppler anemometry measurements. Special attention is paid to estimation of laser-Doppler anemometry measuring volume positioning in cylindrical pipe flow due to optical aberrations, caused by the pipe wall curvature. The hypothesis, that in the central part of the pipe (r/R  lt  0.6) exists a small, or negligible pipe wall influence on laser- -Doppler anemometry measuring position, is investigate. The required corrections, for measurements of axial, tangential, and radial velocity components such: shift of measuring volume and its orientation are analyzed and determined for used test rig and for some other pipe geometries.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Estimation of laser-Doppler anemometry measuring volume displacement in cylindrical pipe flow",
pages = "1042-1027",
number = "4",
volume = "16",
doi = "10.2298/TSCI1204027R"
}

Ristić, S., Ilić, J., Čantrak, Đ., Ristić, O. R.,& Janković, N.. (2012). Estimation of laser-Doppler anemometry measuring volume displacement in cylindrical pipe flow. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 16(4), 1027-1042.
https://doi.org/10.2298/TSCI1204027R

Ristić S, Ilić J, Čantrak Đ, Ristić OR, Janković N. Estimation of laser-Doppler anemometry measuring volume displacement in cylindrical pipe flow. in Thermal Science. 2012;16(4):1027-1042.
doi:10.2298/TSCI1204027R .

Ristić, Slavica, Ilić, Jelena, Čantrak, Đorđe, Ristić, Ognjen R., Janković, Novica, "Estimation of laser-Doppler anemometry measuring volume displacement in cylindrical pipe flow" in Thermal Science, 16, no. 4 (2012):1027-1042,
https://doi.org/10.2298/TSCI1204027R . .

TY  - CONF
AU  - Ristić, Slavica
AU  - Ilić, Jelena
AU  - Ristić, Ognjen
AU  - Čantrak, Đorđe
AU  - Tašin, Slobodan
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4642
AB  - Many sources of uncertainties are inherent in LDA practices and must be recognized to obtain good experimental results. Analysis of uncertainty, for tests that include LDA measurements of velocity vectors in wind tunnels or in cylindrical pipe swirl flows is very complex problem. An overview of the most significant uncertainty sources in the LDA measurements is presented. One of the main groups of uncertainty sources is determined by the optical components arrangement. In this paper, special attention is paid to estimation of laser-Doppler anemometry uncertainty of measurement volume positioning in test devices caused by the wind and water tunnel windows thickness, or by the pipe wall curvature (without using refractive index matching). The required corrections, for measurements of velocity components such: shift of measuring volume and its orientation are analyzed and determined for VTI wind and water tunnels and for some very often used geometry of cylindrical pipes in industry. Depending on different experimental conditions, some of these sources of uncertainty may be neglected, but generally, it is necessary to take
into account all of them in all optical methods, as LDA, PDA, PIV and so on.
PB  - Beograd : Vojnotehnički institut
C3  - Proceedings 5th International Scientific Conference OTEH 2012
T1  - Overview of uncertainty sources in flow velocity vector measurement by LDA
EP  - 48
SP  - 43
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4642
ER  - 

@conference{
author = "Ristić, Slavica and Ilić, Jelena and Ristić, Ognjen and Čantrak, Đorđe and Tašin, Slobodan",
year = "2012",
abstract = "Many sources of uncertainties are inherent in LDA practices and must be recognized to obtain good experimental results. Analysis of uncertainty, for tests that include LDA measurements of velocity vectors in wind tunnels or in cylindrical pipe swirl flows is very complex problem. An overview of the most significant uncertainty sources in the LDA measurements is presented. One of the main groups of uncertainty sources is determined by the optical components arrangement. In this paper, special attention is paid to estimation of laser-Doppler anemometry uncertainty of measurement volume positioning in test devices caused by the wind and water tunnel windows thickness, or by the pipe wall curvature (without using refractive index matching). The required corrections, for measurements of velocity components such: shift of measuring volume and its orientation are analyzed and determined for VTI wind and water tunnels and for some very often used geometry of cylindrical pipes in industry. Depending on different experimental conditions, some of these sources of uncertainty may be neglected, but generally, it is necessary to take
into account all of them in all optical methods, as LDA, PDA, PIV and so on.",
publisher = "Beograd : Vojnotehnički institut",
journal = "Proceedings 5th International Scientific Conference OTEH 2012",
title = "Overview of uncertainty sources in flow velocity vector measurement by LDA",
pages = "48-43",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4642"
}

Ristić, S., Ilić, J., Ristić, O., Čantrak, Đ.,& Tašin, S.. (2012). Overview of uncertainty sources in flow velocity vector measurement by LDA. in Proceedings 5th International Scientific Conference OTEH 2012
Beograd : Vojnotehnički institut., 43-48.
https://hdl.handle.net/21.15107/rcub_machinery_4642

Ristić S, Ilić J, Ristić O, Čantrak Đ, Tašin S. Overview of uncertainty sources in flow velocity vector measurement by LDA. in Proceedings 5th International Scientific Conference OTEH 2012. 2012;:43-48.
https://hdl.handle.net/21.15107/rcub_machinery_4642 .

Ristić, Slavica, Ilić, Jelena, Ristić, Ognjen, Čantrak, Đorđe, Tašin, Slobodan, "Overview of uncertainty sources in flow velocity vector measurement by LDA" in Proceedings 5th International Scientific Conference OTEH 2012 (2012):43-48,
https://hdl.handle.net/21.15107/rcub_machinery_4642 .