Manufacturing parameter influence on FDM polypropylene tensile properties
Само за регистроване кориснике
2023
Аутори
Milovanović, AleksaGolubović, Zorana
Kirin, Snežana
Babinský, Tomáš
Šulák, Ivo
Milošević, Miloš
Sedmak, Aleksandar
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic material used in FDM technology. Not much research has been conducted on this FDM material so far, hence, the subject of this paper is the investigation of printing parameters’ influence on PP tensile properties. Targeted parameters are layer height, infill density, and the orientation of raster lines, resulting in four different manufacturing regimes. To have a better insight into the experimental results, the data are analysed using ANOVA statistical method with Tukey HSD post hoc test. Obtained statistical results have proven the printing parameter’s influence on tensile results, emphasizing the influence on elastic modulus. Here, Tukey test results show the maximal number of homogeneous subsets evidencing that all printing parameters have an influence on elastic mo...dulus values.
Кључне речи:
Fused deposition modeling / Polypropylene / Additive manufacturing parameters / ANOVAИзвор:
Journal of Mechanical Science and Technology, 2023, 37, 11, 1-7Финансирање / пројекти:
- European Union’s Horizon 2020 research and innovation program (H2020-WIDESPREAD-2018, SIRAMM), grant agreement No. 857124
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Inovacioni centarTY - JOUR AU - Milovanović, Aleksa AU - Golubović, Zorana AU - Kirin, Snežana AU - Babinský, Tomáš AU - Šulák, Ivo AU - Milošević, Miloš AU - Sedmak, Aleksandar PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7643 AB - Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic material used in FDM technology. Not much research has been conducted on this FDM material so far, hence, the subject of this paper is the investigation of printing parameters’ influence on PP tensile properties. Targeted parameters are layer height, infill density, and the orientation of raster lines, resulting in four different manufacturing regimes. To have a better insight into the experimental results, the data are analysed using ANOVA statistical method with Tukey HSD post hoc test. Obtained statistical results have proven the printing parameter’s influence on tensile results, emphasizing the influence on elastic modulus. Here, Tukey test results show the maximal number of homogeneous subsets evidencing that all printing parameters have an influence on elastic modulus values. T2 - Journal of Mechanical Science and Technology T1 - Manufacturing parameter influence on FDM polypropylene tensile properties EP - 7 IS - 11 SP - 1 VL - 37 DO - 10.1007/s12206-023-2305-5 ER -
@article{ author = "Milovanović, Aleksa and Golubović, Zorana and Kirin, Snežana and Babinský, Tomáš and Šulák, Ivo and Milošević, Miloš and Sedmak, Aleksandar", year = "2023", abstract = "Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic material used in FDM technology. Not much research has been conducted on this FDM material so far, hence, the subject of this paper is the investigation of printing parameters’ influence on PP tensile properties. Targeted parameters are layer height, infill density, and the orientation of raster lines, resulting in four different manufacturing regimes. To have a better insight into the experimental results, the data are analysed using ANOVA statistical method with Tukey HSD post hoc test. Obtained statistical results have proven the printing parameter’s influence on tensile results, emphasizing the influence on elastic modulus. Here, Tukey test results show the maximal number of homogeneous subsets evidencing that all printing parameters have an influence on elastic modulus values.", journal = "Journal of Mechanical Science and Technology", title = "Manufacturing parameter influence on FDM polypropylene tensile properties", pages = "7-1", number = "11", volume = "37", doi = "10.1007/s12206-023-2305-5" }
Milovanović, A., Golubović, Z., Kirin, S., Babinský, T., Šulák, I., Milošević, M.,& Sedmak, A.. (2023). Manufacturing parameter influence on FDM polypropylene tensile properties. in Journal of Mechanical Science and Technology, 37(11), 1-7. https://doi.org/10.1007/s12206-023-2305-5
Milovanović A, Golubović Z, Kirin S, Babinský T, Šulák I, Milošević M, Sedmak A. Manufacturing parameter influence on FDM polypropylene tensile properties. in Journal of Mechanical Science and Technology. 2023;37(11):1-7. doi:10.1007/s12206-023-2305-5 .
Milovanović, Aleksa, Golubović, Zorana, Kirin, Snežana, Babinský, Tomáš, Šulák, Ivo, Milošević, Miloš, Sedmak, Aleksandar, "Manufacturing parameter influence on FDM polypropylene tensile properties" in Journal of Mechanical Science and Technology, 37, no. 11 (2023):1-7, https://doi.org/10.1007/s12206-023-2305-5 . .