Determination of cavitation resistance of glass- ceramics based on basalt
2021
Аутори
Pavlović, MarkoDojčinović, Marina
Andrić, Ljubiša
Trumbulović, Ljiljana
Čeganjac, Zoran
Milovanović, Aleksandar
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The paper examines the resistance to the effect of cavitation of raw basalt samples from the Vrelo-Kopaonik deposit and basalt-based glass-ceramics obtained by melting and casting of the basalt aggregate. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy. In the case of raw basalt samples it is evident that the incubation period in the early phase of cavitation damage is short, because the period without mass loss is almost negligible. According to the selected test conditions in the first 15 min, the mass loss of these samples is up to 15 mg, for 120 min exposure is 88,5mg, with a cavitation rate of 0,7 mg/min and total surface area damage of 35%. Analyzing the progression of erosion samples of glass-ceramic...s, it can be concluded that the loss of mass is small, in the first 15 min the mass loss is 1,29 mg, for 120 min exposure is 3,53 mg, with a cavitation rate of 0.03 mg/min and total surface damage of the sample surface of 12%. The higher erosion rate of the raw basalt samples compared to glass-ceramic samples based on basalt can be interpreted by the rough structure of the olivine-pyrroxene basalt from Vrelo-Kopaonik deposit, compared to the compact structure of the obtained glass-ceramic samples, with glass and fluid texture, very great hardness. Research has shown that the process of obtaining samples of glass-ceramic greatly influences cavitation resistance, especially relaxation cooling processes that eliminate internal stresses and reduce brittleness of samples. It has been shown that glass-ceramic samples based on olivine-pyroxene basalt from the test deposit can be applied in conditions in which high cavitation loads are expected.
Кључне речи:
cavitation / raw basalt / image analysisИзвор:
The Nineth Serbian Ceramic Society Conference »Advanced Ceramics and Application« September 20-21, 2021, Book of Abstracts, 2021Колекције
Институција/група
Inovacioni centarTY - CONF AU - Pavlović, Marko AU - Dojčinović, Marina AU - Andrić, Ljubiša AU - Trumbulović, Ljiljana AU - Čeganjac, Zoran AU - Milovanović, Aleksandar PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7623 AB - The paper examines the resistance to the effect of cavitation of raw basalt samples from the Vrelo-Kopaonik deposit and basalt-based glass-ceramics obtained by melting and casting of the basalt aggregate. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy. In the case of raw basalt samples it is evident that the incubation period in the early phase of cavitation damage is short, because the period without mass loss is almost negligible. According to the selected test conditions in the first 15 min, the mass loss of these samples is up to 15 mg, for 120 min exposure is 88,5mg, with a cavitation rate of 0,7 mg/min and total surface area damage of 35%. Analyzing the progression of erosion samples of glass-ceramics, it can be concluded that the loss of mass is small, in the first 15 min the mass loss is 1,29 mg, for 120 min exposure is 3,53 mg, with a cavitation rate of 0.03 mg/min and total surface damage of the sample surface of 12%. The higher erosion rate of the raw basalt samples compared to glass-ceramic samples based on basalt can be interpreted by the rough structure of the olivine-pyrroxene basalt from Vrelo-Kopaonik deposit, compared to the compact structure of the obtained glass-ceramic samples, with glass and fluid texture, very great hardness. Research has shown that the process of obtaining samples of glass-ceramic greatly influences cavitation resistance, especially relaxation cooling processes that eliminate internal stresses and reduce brittleness of samples. It has been shown that glass-ceramic samples based on olivine-pyroxene basalt from the test deposit can be applied in conditions in which high cavitation loads are expected. C3 - The Nineth Serbian Ceramic Society Conference »Advanced Ceramics and Application« September 20-21, 2021, Book of Abstracts T1 - Determination of cavitation resistance of glass- ceramics based on basalt UR - https://hdl.handle.net/21.15107/rcub_machinery_7623 ER -
@conference{ author = "Pavlović, Marko and Dojčinović, Marina and Andrić, Ljubiša and Trumbulović, Ljiljana and Čeganjac, Zoran and Milovanović, Aleksandar", year = "2021", abstract = "The paper examines the resistance to the effect of cavitation of raw basalt samples from the Vrelo-Kopaonik deposit and basalt-based glass-ceramics obtained by melting and casting of the basalt aggregate. A change in the sample mass in function of the cavitation time was monitored for the evaluation of cavitation resistance. The level of degradation of the surface of the sample was quantified using the image analysis. The change in the morphology of the sample surface with the test time was followed by scanning electron microscopy. In the case of raw basalt samples it is evident that the incubation period in the early phase of cavitation damage is short, because the period without mass loss is almost negligible. According to the selected test conditions in the first 15 min, the mass loss of these samples is up to 15 mg, for 120 min exposure is 88,5mg, with a cavitation rate of 0,7 mg/min and total surface area damage of 35%. Analyzing the progression of erosion samples of glass-ceramics, it can be concluded that the loss of mass is small, in the first 15 min the mass loss is 1,29 mg, for 120 min exposure is 3,53 mg, with a cavitation rate of 0.03 mg/min and total surface damage of the sample surface of 12%. The higher erosion rate of the raw basalt samples compared to glass-ceramic samples based on basalt can be interpreted by the rough structure of the olivine-pyrroxene basalt from Vrelo-Kopaonik deposit, compared to the compact structure of the obtained glass-ceramic samples, with glass and fluid texture, very great hardness. Research has shown that the process of obtaining samples of glass-ceramic greatly influences cavitation resistance, especially relaxation cooling processes that eliminate internal stresses and reduce brittleness of samples. It has been shown that glass-ceramic samples based on olivine-pyroxene basalt from the test deposit can be applied in conditions in which high cavitation loads are expected.", journal = "The Nineth Serbian Ceramic Society Conference »Advanced Ceramics and Application« September 20-21, 2021, Book of Abstracts", title = "Determination of cavitation resistance of glass- ceramics based on basalt", url = "https://hdl.handle.net/21.15107/rcub_machinery_7623" }
Pavlović, M., Dojčinović, M., Andrić, L., Trumbulović, L., Čeganjac, Z.,& Milovanović, A.. (2021). Determination of cavitation resistance of glass- ceramics based on basalt. in The Nineth Serbian Ceramic Society Conference »Advanced Ceramics and Application« September 20-21, 2021, Book of Abstracts. https://hdl.handle.net/21.15107/rcub_machinery_7623
Pavlović M, Dojčinović M, Andrić L, Trumbulović L, Čeganjac Z, Milovanović A. Determination of cavitation resistance of glass- ceramics based on basalt. in The Nineth Serbian Ceramic Society Conference »Advanced Ceramics and Application« September 20-21, 2021, Book of Abstracts. 2021;. https://hdl.handle.net/21.15107/rcub_machinery_7623 .
Pavlović, Marko, Dojčinović, Marina, Andrić, Ljubiša, Trumbulović, Ljiljana, Čeganjac, Zoran, Milovanović, Aleksandar, "Determination of cavitation resistance of glass- ceramics based on basalt" in The Nineth Serbian Ceramic Society Conference »Advanced Ceramics and Application« September 20-21, 2021, Book of Abstracts (2021), https://hdl.handle.net/21.15107/rcub_machinery_7623 .