Contact Stress Study and FME Analysis of Large Size Thrust Ball Bearings
2016
Аутори
Marinković, AleksandarLazović, Tatjana
Grbović, Aleksandar
Stanković, Miloš
Minewitsch, Alexander
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Thrust ball bearings with extremely large size and capacity, are not standardized and could not be found in catalogues. In aim to investigate possible failure causes of thrust ball bearings in heavy machinery excavators, this paper presents stress and deformations calculation supported with FME analysis in balls-raceway interfaces because of carrying whole upper construction and allow rotation movement. In this paper it was performed numerical calculations and their comparison for two, conceptually different types of large size thrust bearings. First one is classical pivot, such as load distribution in modified new bearing solution. Contact stress calculation of those bearings and FME analysis show that stress and deformation values for ball are near to the limit of static load capacity. Presented study supported by images of balls and raceways damage appearance, with or without grease as a lubricant, could be very useful in the bearing failure analysis.
Кључне речи:
Thrust ball bearing / contact stress / contact deformation / FEM analysis / bearing failureИзвор:
5th International Conference on Power Transmission BAPT2016, 2016, 7-14Финансирање / пројекти:
- Интегритет опреме под притиском при истовременом деловању замарајућег оптерећења и температуре (RS-MESTD-Technological Development (TD or TR)-35011)
- Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита (RS-MESTD-Technological Development (TD or TR)-35021)
Институција/група
Inovacioni centarTY - CONF AU - Marinković, Aleksandar AU - Lazović, Tatjana AU - Grbović, Aleksandar AU - Stanković, Miloš AU - Minewitsch, Alexander PY - 2016 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7589 AB - Thrust ball bearings with extremely large size and capacity, are not standardized and could not be found in catalogues. In aim to investigate possible failure causes of thrust ball bearings in heavy machinery excavators, this paper presents stress and deformations calculation supported with FME analysis in balls-raceway interfaces because of carrying whole upper construction and allow rotation movement. In this paper it was performed numerical calculations and their comparison for two, conceptually different types of large size thrust bearings. First one is classical pivot, such as load distribution in modified new bearing solution. Contact stress calculation of those bearings and FME analysis show that stress and deformation values for ball are near to the limit of static load capacity. Presented study supported by images of balls and raceways damage appearance, with or without grease as a lubricant, could be very useful in the bearing failure analysis. C3 - 5th International Conference on Power Transmission BAPT2016 T1 - Contact Stress Study and FME Analysis of Large Size Thrust Ball Bearings EP - 14 SP - 7 UR - https://hdl.handle.net/21.15107/rcub_machinery_7589 ER -
@conference{ author = "Marinković, Aleksandar and Lazović, Tatjana and Grbović, Aleksandar and Stanković, Miloš and Minewitsch, Alexander", year = "2016", abstract = "Thrust ball bearings with extremely large size and capacity, are not standardized and could not be found in catalogues. In aim to investigate possible failure causes of thrust ball bearings in heavy machinery excavators, this paper presents stress and deformations calculation supported with FME analysis in balls-raceway interfaces because of carrying whole upper construction and allow rotation movement. In this paper it was performed numerical calculations and their comparison for two, conceptually different types of large size thrust bearings. First one is classical pivot, such as load distribution in modified new bearing solution. Contact stress calculation of those bearings and FME analysis show that stress and deformation values for ball are near to the limit of static load capacity. Presented study supported by images of balls and raceways damage appearance, with or without grease as a lubricant, could be very useful in the bearing failure analysis.", journal = "5th International Conference on Power Transmission BAPT2016", title = "Contact Stress Study and FME Analysis of Large Size Thrust Ball Bearings", pages = "14-7", url = "https://hdl.handle.net/21.15107/rcub_machinery_7589" }
Marinković, A., Lazović, T., Grbović, A., Stanković, M.,& Minewitsch, A.. (2016). Contact Stress Study and FME Analysis of Large Size Thrust Ball Bearings. in 5th International Conference on Power Transmission BAPT2016, 7-14. https://hdl.handle.net/21.15107/rcub_machinery_7589
Marinković A, Lazović T, Grbović A, Stanković M, Minewitsch A. Contact Stress Study and FME Analysis of Large Size Thrust Ball Bearings. in 5th International Conference on Power Transmission BAPT2016. 2016;:7-14. https://hdl.handle.net/21.15107/rcub_machinery_7589 .
Marinković, Aleksandar, Lazović, Tatjana, Grbović, Aleksandar, Stanković, Miloš, Minewitsch, Alexander, "Contact Stress Study and FME Analysis of Large Size Thrust Ball Bearings" in 5th International Conference on Power Transmission BAPT2016 (2016):7-14, https://hdl.handle.net/21.15107/rcub_machinery_7589 .