Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies
2023
Autori
Petrov, LjubišaBojović, Božica
Golubović, Zorana
Sedmak, Aleksandar
Mišković, Žarko
Trajković, Isaak
Milošević, Miloš
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Since the beginnings of additive manufacturing (AM) in the 1980s, vat polymerization was the first and most intensively developing technology that enabled the production of very precise parts from photosensitive polymer resins. One of the most studied polymer materials is acrylonitrile butadiene styrene (ABS), but mostly in the form of filaments for the FDM (Fused Deposition Modelling) process. The objective of this research was to investigate in detail the mechanical properties of ABS resin specimens fabricated by stereolithography (SLA) and digital light processing (DLP). Specimen geometries were based on standards for tensile, threepoint bending, and compression tests. By combining deformation and mechanical tests with optical microscopic analyses of the morphology and fracture surface structures, as well as Shore A hardness measurements, a deeper insight into the behaviour of commercially available ABS resins was gained.
Ključne reči:
additive manufacturing / SLA / DLP / ABS resin / mechanical propertiesIzvor:
Structural Integrity and Life, 2023, 23, 2, 117-121Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200105 (Univerzitet u Beogradu, Mašinski fakultet) (RS-MESTD-inst-2020-200105)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Petrov, Ljubiša AU - Bojović, Božica AU - Golubović, Zorana AU - Sedmak, Aleksandar AU - Mišković, Žarko AU - Trajković, Isaak AU - Milošević, Miloš PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7149 AB - Since the beginnings of additive manufacturing (AM) in the 1980s, vat polymerization was the first and most intensively developing technology that enabled the production of very precise parts from photosensitive polymer resins. One of the most studied polymer materials is acrylonitrile butadiene styrene (ABS), but mostly in the form of filaments for the FDM (Fused Deposition Modelling) process. The objective of this research was to investigate in detail the mechanical properties of ABS resin specimens fabricated by stereolithography (SLA) and digital light processing (DLP). Specimen geometries were based on standards for tensile, threepoint bending, and compression tests. By combining deformation and mechanical tests with optical microscopic analyses of the morphology and fracture surface structures, as well as Shore A hardness measurements, a deeper insight into the behaviour of commercially available ABS resins was gained. T2 - Structural Integrity and Life T1 - Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies EP - 121 IS - 2 SP - 117 VL - 23 UR - https://hdl.handle.net/21.15107/rcub_machinery_7149 ER -
@article{ author = "Petrov, Ljubiša and Bojović, Božica and Golubović, Zorana and Sedmak, Aleksandar and Mišković, Žarko and Trajković, Isaak and Milošević, Miloš", year = "2023", abstract = "Since the beginnings of additive manufacturing (AM) in the 1980s, vat polymerization was the first and most intensively developing technology that enabled the production of very precise parts from photosensitive polymer resins. One of the most studied polymer materials is acrylonitrile butadiene styrene (ABS), but mostly in the form of filaments for the FDM (Fused Deposition Modelling) process. The objective of this research was to investigate in detail the mechanical properties of ABS resin specimens fabricated by stereolithography (SLA) and digital light processing (DLP). Specimen geometries were based on standards for tensile, threepoint bending, and compression tests. By combining deformation and mechanical tests with optical microscopic analyses of the morphology and fracture surface structures, as well as Shore A hardness measurements, a deeper insight into the behaviour of commercially available ABS resins was gained.", journal = "Structural Integrity and Life", title = "Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies", pages = "121-117", number = "2", volume = "23", url = "https://hdl.handle.net/21.15107/rcub_machinery_7149" }
Petrov, L., Bojović, B., Golubović, Z., Sedmak, A., Mišković, Ž., Trajković, I.,& Milošević, M.. (2023). Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies. in Structural Integrity and Life, 23(2), 117-121. https://hdl.handle.net/21.15107/rcub_machinery_7149
Petrov L, Bojović B, Golubović Z, Sedmak A, Mišković Ž, Trajković I, Milošević M. Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies. in Structural Integrity and Life. 2023;23(2):117-121. https://hdl.handle.net/21.15107/rcub_machinery_7149 .
Petrov, Ljubiša, Bojović, Božica, Golubović, Zorana, Sedmak, Aleksandar, Mišković, Žarko, Trajković, Isaak, Milošević, Miloš, "Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies" in Structural Integrity and Life, 23, no. 2 (2023):117-121, https://hdl.handle.net/21.15107/rcub_machinery_7149 .