Kinematika procesa obrade sečenja žicom / Kinematics of the wire cutting process
Апстракт
Proces obrade sečenja materijala je jedan od značajnijih metoda obrade u savremenoj industriji. Sa ciljem da se proces obrade u određenoj meri unapredi, u okviru ovoga rada je analizirano kretanje alata tokom procesa obrade kao i uticaj kretanja alata na kretanja mehanzma mašine alatke. Pažnja je posvećena kompleksnoj višeosnoj mašini alatki koja je konfigurisana pomoću dva ravanska rekonfigurabilna mehanizma sa paralenom kinematikom. Mašine alatke zasnovane na paralelnim mehanizmima, a namenjene za proces obrade sečenja žicom su nedovoljno izučavane te rezultati ovoga rada daju značajan doprinos u njihovom budućem razvoju.
The wire-cutting process is one of the most important processing methods in modern industry. To improve the machining process to a certain extent, the movement of the tool during the machining process as well as the influence of the movement of the tool on the movement of the mechanism of the machine tool were analyzed in this paper. Attention is devoted to a complex multi-axis machine tool, which is made up of two planar reconfigurable mechanisms with parallel kinematics. Machine tools based on parallel mechanisms, intended for the wire-cutting process, are insufficiently studied, and this work's results significantly contribute to their future development.
Кључне речи:
Sečenje žicom / Kompleksne mašine alatke / Paralelni mehanizmi / Rekonfigurabilni mehanizmi / Kinematički problemi / Wire cutting process / Complex machine tools / Parallel mechanisms / Reconfigurable mechanisms / Kinematics problemsИзвор:
39th International Conference on Production Engineering of Serbia ICPES 2023, 26-27. October 2023, Novi Sad, 2023, 206-211Издавач:
- UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Напомена:
- Technical treatment and design: Milana ILIĆ MIĆUNOVIĆ, Miloš RANISAVLJEV, Branko ŠTRBAC, Miodrag HADŽISTEVIĆ
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Vasilić, Goran AU - Živanović, Saša AU - Milutinović, Milan AU - Dimić, Zoran PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7134 AB - Proces obrade sečenja materijala je jedan od značajnijih metoda obrade u savremenoj industriji. Sa ciljem da se proces obrade u određenoj meri unapredi, u okviru ovoga rada je analizirano kretanje alata tokom procesa obrade kao i uticaj kretanja alata na kretanja mehanzma mašine alatke. Pažnja je posvećena kompleksnoj višeosnoj mašini alatki koja je konfigurisana pomoću dva ravanska rekonfigurabilna mehanizma sa paralenom kinematikom. Mašine alatke zasnovane na paralelnim mehanizmima, a namenjene za proces obrade sečenja žicom su nedovoljno izučavane te rezultati ovoga rada daju značajan doprinos u njihovom budućem razvoju. AB - The wire-cutting process is one of the most important processing methods in modern industry. To improve the machining process to a certain extent, the movement of the tool during the machining process as well as the influence of the movement of the tool on the movement of the mechanism of the machine tool were analyzed in this paper. Attention is devoted to a complex multi-axis machine tool, which is made up of two planar reconfigurable mechanisms with parallel kinematics. Machine tools based on parallel mechanisms, intended for the wire-cutting process, are insufficiently studied, and this work's results significantly contribute to their future development. PB - UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES C3 - 39th International Conference on Production Engineering of Serbia ICPES 2023, 26-27. October 2023, Novi Sad T1 - Kinematika procesa obrade sečenja žicom / Kinematics of the wire cutting process EP - 211 SP - 206 UR - https://hdl.handle.net/21.15107/rcub_machinery_7134 ER -
@conference{ author = "Vasilić, Goran and Živanović, Saša and Milutinović, Milan and Dimić, Zoran", year = "2023", abstract = "Proces obrade sečenja materijala je jedan od značajnijih metoda obrade u savremenoj industriji. Sa ciljem da se proces obrade u određenoj meri unapredi, u okviru ovoga rada je analizirano kretanje alata tokom procesa obrade kao i uticaj kretanja alata na kretanja mehanzma mašine alatke. Pažnja je posvećena kompleksnoj višeosnoj mašini alatki koja je konfigurisana pomoću dva ravanska rekonfigurabilna mehanizma sa paralenom kinematikom. Mašine alatke zasnovane na paralelnim mehanizmima, a namenjene za proces obrade sečenja žicom su nedovoljno izučavane te rezultati ovoga rada daju značajan doprinos u njihovom budućem razvoju., The wire-cutting process is one of the most important processing methods in modern industry. To improve the machining process to a certain extent, the movement of the tool during the machining process as well as the influence of the movement of the tool on the movement of the mechanism of the machine tool were analyzed in this paper. Attention is devoted to a complex multi-axis machine tool, which is made up of two planar reconfigurable mechanisms with parallel kinematics. Machine tools based on parallel mechanisms, intended for the wire-cutting process, are insufficiently studied, and this work's results significantly contribute to their future development.", publisher = "UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES", journal = "39th International Conference on Production Engineering of Serbia ICPES 2023, 26-27. October 2023, Novi Sad", title = "Kinematika procesa obrade sečenja žicom / Kinematics of the wire cutting process", pages = "211-206", url = "https://hdl.handle.net/21.15107/rcub_machinery_7134" }
Vasilić, G., Živanović, S., Milutinović, M.,& Dimić, Z.. (2023). Kinematika procesa obrade sečenja žicom / Kinematics of the wire cutting process. in 39th International Conference on Production Engineering of Serbia ICPES 2023, 26-27. October 2023, Novi Sad UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES., 206-211. https://hdl.handle.net/21.15107/rcub_machinery_7134
Vasilić G, Živanović S, Milutinović M, Dimić Z. Kinematika procesa obrade sečenja žicom / Kinematics of the wire cutting process. in 39th International Conference on Production Engineering of Serbia ICPES 2023, 26-27. October 2023, Novi Sad. 2023;:206-211. https://hdl.handle.net/21.15107/rcub_machinery_7134 .
Vasilić, Goran, Živanović, Saša, Milutinović, Milan, Dimić, Zoran, "Kinematika procesa obrade sečenja žicom / Kinematics of the wire cutting process" in 39th International Conference on Production Engineering of Serbia ICPES 2023, 26-27. October 2023, Novi Sad (2023):206-211, https://hdl.handle.net/21.15107/rcub_machinery_7134 .