Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
Samo za registrovane korisnike
2023
Autori
Jevtić, IvanaGolubović, Zorana
Mladenović, Goran
Berto, Filippo
Sedmak, Aleksandar
Milovanović, Aleksa
Milošević, Miloš
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for manufacturing parts with sufficient mechanical and thermal properties. In SLS, many manufacturing parameters have an effect on the mechanical properties of final parts. Even the decision regarding the orientation of a part in a powder bed may have a significant effect on the mechanical properties. In this research, the influence of horizontal (H) and vertical (V) printing orientations on the ultimate tensile strength (UTS) of fabricated PA12 specimens are examined. Our research findings show that H specimens exhibit larger deformations and smaller UTS value scatter in comparison with V specimens. Also, worth pointing out is the fact that V-oriented specimens have a higher elastic modulus. One can assume that the sintering process is more effective in V specimens, due to a m...ore uniform laser beam trajectory than in the H specimens' case.
Ključne reči:
Polyamide 12 / SLS / Printing orientation / Ultimate tensile strengthIzvor:
Journal of Mechanical and Technology, 2023, 37, 11, 1-6Izdavač:
- Springer
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200105 (Univerzitet u Beogradu, Mašinski fakultet) (RS-MESTD-inst-2020-200105)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200213 (Inovacioni centar Mašinskog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200213)
Kolekcije
Institucija/grupa
Inovacioni centarTY - JOUR AU - Jevtić, Ivana AU - Golubović, Zorana AU - Mladenović, Goran AU - Berto, Filippo AU - Sedmak, Aleksandar AU - Milovanović, Aleksa AU - Milošević, Miloš PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7011 AB - Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for manufacturing parts with sufficient mechanical and thermal properties. In SLS, many manufacturing parameters have an effect on the mechanical properties of final parts. Even the decision regarding the orientation of a part in a powder bed may have a significant effect on the mechanical properties. In this research, the influence of horizontal (H) and vertical (V) printing orientations on the ultimate tensile strength (UTS) of fabricated PA12 specimens are examined. Our research findings show that H specimens exhibit larger deformations and smaller UTS value scatter in comparison with V specimens. Also, worth pointing out is the fact that V-oriented specimens have a higher elastic modulus. One can assume that the sintering process is more effective in V specimens, due to a more uniform laser beam trajectory than in the H specimens' case. PB - Springer T2 - Journal of Mechanical and Technology T1 - Printing orientation influence on tensile strength of PA12 specimens obtained by SLS EP - 6 IS - 11 SP - 1 VL - 37 DO - 10.1007/s12206-023-2306-4 ER -
@article{ author = "Jevtić, Ivana and Golubović, Zorana and Mladenović, Goran and Berto, Filippo and Sedmak, Aleksandar and Milovanović, Aleksa and Milošević, Miloš", year = "2023", abstract = "Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for manufacturing parts with sufficient mechanical and thermal properties. In SLS, many manufacturing parameters have an effect on the mechanical properties of final parts. Even the decision regarding the orientation of a part in a powder bed may have a significant effect on the mechanical properties. In this research, the influence of horizontal (H) and vertical (V) printing orientations on the ultimate tensile strength (UTS) of fabricated PA12 specimens are examined. Our research findings show that H specimens exhibit larger deformations and smaller UTS value scatter in comparison with V specimens. Also, worth pointing out is the fact that V-oriented specimens have a higher elastic modulus. One can assume that the sintering process is more effective in V specimens, due to a more uniform laser beam trajectory than in the H specimens' case.", publisher = "Springer", journal = "Journal of Mechanical and Technology", title = "Printing orientation influence on tensile strength of PA12 specimens obtained by SLS", pages = "6-1", number = "11", volume = "37", doi = "10.1007/s12206-023-2306-4" }
Jevtić, I., Golubović, Z., Mladenović, G., Berto, F., Sedmak, A., Milovanović, A.,& Milošević, M.. (2023). Printing orientation influence on tensile strength of PA12 specimens obtained by SLS. in Journal of Mechanical and Technology Springer., 37(11), 1-6. https://doi.org/10.1007/s12206-023-2306-4
Jevtić I, Golubović Z, Mladenović G, Berto F, Sedmak A, Milovanović A, Milošević M. Printing orientation influence on tensile strength of PA12 specimens obtained by SLS. in Journal of Mechanical and Technology. 2023;37(11):1-6. doi:10.1007/s12206-023-2306-4 .
Jevtić, Ivana, Golubović, Zorana, Mladenović, Goran, Berto, Filippo, Sedmak, Aleksandar, Milovanović, Aleksa, Milošević, Miloš, "Printing orientation influence on tensile strength of PA12 specimens obtained by SLS" in Journal of Mechanical and Technology, 37, no. 11 (2023):1-6, https://doi.org/10.1007/s12206-023-2306-4 . .