Design and rapid prototyping of medical devices – case study: mechanical ventilator
2021
Аутори
Mišković, ŽarkoMitrović, Radivoje
Milošević, Miloš
Petrović, Goran
Mladenović, Goran
Trajković, Isaak
Marković, Dejan
Конференцијски прилог (Објављена верзија)
,
Innovation Center of Faculty of Mechanical Engineering
Метаподаци
Приказ свих података о документуАпстракт
In the year 2019th, 77.000 new ventilators were more than enough to meet the market demand worldwide. However, during the peak of the COVID-19 pandemic, large cities alone need more than additional 30.000 machines per city (example: New York). At the time, almost all ventilator manufacturers have boosted their production by 30-50% but, they still weren’t able to deliver the required production growth. One way to solve the medical devices shortage problem is the development and large-scale production of new medical devices. The main issue of this approach is the complexity of medical devices as a mechanical system, especially taking into account the obligatory medical verification. That’s the main reason why existing standardized medical equipment should be used as a basis for the development of the new prototypes. This approach is implemented during the development of the new mechanical ventilator. Used methods include all traditional product development activities (such as the definit...ion of desired characteristics, comparative analysis of literature and existing ventilators, definition of different variant solutions, and selection of best technical solution for further development) followed by the modern product development methods: 3d modeling, FMEA and rapid prototyping using advanced 3d printers. The verification of the new mechanical ventilator prototype was successfully performed, setting up a basis for further improvements. The developed prototype has numerous advantages compared to the competition (i.e. it is much cheaper and easily produced with comparable technical characteristics) but its main advantage is a brand-new system for patients’ exile air sterilization and filtration.
Кључне речи:
Machine Design / Product Development / Rapid Prototyping / Mechanical Ventilator / Medical DevicesИзвор:
5th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2021, Zlatibor, June 29-July 02., 2021, 4-4Издавач:
- Innovation Center of Faculty of Mechanical Engineering
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Mišković, Žarko AU - Mitrović, Radivoje AU - Milošević, Miloš AU - Petrović, Goran AU - Mladenović, Goran AU - Trajković, Isaak AU - Marković, Dejan PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6932 AB - In the year 2019th, 77.000 new ventilators were more than enough to meet the market demand worldwide. However, during the peak of the COVID-19 pandemic, large cities alone need more than additional 30.000 machines per city (example: New York). At the time, almost all ventilator manufacturers have boosted their production by 30-50% but, they still weren’t able to deliver the required production growth. One way to solve the medical devices shortage problem is the development and large-scale production of new medical devices. The main issue of this approach is the complexity of medical devices as a mechanical system, especially taking into account the obligatory medical verification. That’s the main reason why existing standardized medical equipment should be used as a basis for the development of the new prototypes. This approach is implemented during the development of the new mechanical ventilator. Used methods include all traditional product development activities (such as the definition of desired characteristics, comparative analysis of literature and existing ventilators, definition of different variant solutions, and selection of best technical solution for further development) followed by the modern product development methods: 3d modeling, FMEA and rapid prototyping using advanced 3d printers. The verification of the new mechanical ventilator prototype was successfully performed, setting up a basis for further improvements. The developed prototype has numerous advantages compared to the competition (i.e. it is much cheaper and easily produced with comparable technical characteristics) but its main advantage is a brand-new system for patients’ exile air sterilization and filtration. PB - Innovation Center of Faculty of Mechanical Engineering C3 - 5th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2021, Zlatibor, June 29-July 02. T1 - Design and rapid prototyping of medical devices – case study: mechanical ventilator EP - 4 SP - 4 UR - https://hdl.handle.net/21.15107/rcub_machinery_6932 ER -
@conference{ author = "Mišković, Žarko and Mitrović, Radivoje and Milošević, Miloš and Petrović, Goran and Mladenović, Goran and Trajković, Isaak and Marković, Dejan", year = "2021", abstract = "In the year 2019th, 77.000 new ventilators were more than enough to meet the market demand worldwide. However, during the peak of the COVID-19 pandemic, large cities alone need more than additional 30.000 machines per city (example: New York). At the time, almost all ventilator manufacturers have boosted their production by 30-50% but, they still weren’t able to deliver the required production growth. One way to solve the medical devices shortage problem is the development and large-scale production of new medical devices. The main issue of this approach is the complexity of medical devices as a mechanical system, especially taking into account the obligatory medical verification. That’s the main reason why existing standardized medical equipment should be used as a basis for the development of the new prototypes. This approach is implemented during the development of the new mechanical ventilator. Used methods include all traditional product development activities (such as the definition of desired characteristics, comparative analysis of literature and existing ventilators, definition of different variant solutions, and selection of best technical solution for further development) followed by the modern product development methods: 3d modeling, FMEA and rapid prototyping using advanced 3d printers. The verification of the new mechanical ventilator prototype was successfully performed, setting up a basis for further improvements. The developed prototype has numerous advantages compared to the competition (i.e. it is much cheaper and easily produced with comparable technical characteristics) but its main advantage is a brand-new system for patients’ exile air sterilization and filtration.", publisher = "Innovation Center of Faculty of Mechanical Engineering", journal = "5th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2021, Zlatibor, June 29-July 02.", title = "Design and rapid prototyping of medical devices – case study: mechanical ventilator", pages = "4-4", url = "https://hdl.handle.net/21.15107/rcub_machinery_6932" }
Mišković, Ž., Mitrović, R., Milošević, M., Petrović, G., Mladenović, G., Trajković, I.,& Marković, D.. (2021). Design and rapid prototyping of medical devices – case study: mechanical ventilator. in 5th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2021, Zlatibor, June 29-July 02. Innovation Center of Faculty of Mechanical Engineering., 4-4. https://hdl.handle.net/21.15107/rcub_machinery_6932
Mišković Ž, Mitrović R, Milošević M, Petrović G, Mladenović G, Trajković I, Marković D. Design and rapid prototyping of medical devices – case study: mechanical ventilator. in 5th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2021, Zlatibor, June 29-July 02.. 2021;:4-4. https://hdl.handle.net/21.15107/rcub_machinery_6932 .
Mišković, Žarko, Mitrović, Radivoje, Milošević, Miloš, Petrović, Goran, Mladenović, Goran, Trajković, Isaak, Marković, Dejan, "Design and rapid prototyping of medical devices – case study: mechanical ventilator" in 5th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2021, Zlatibor, June 29-July 02. (2021):4-4, https://hdl.handle.net/21.15107/rcub_machinery_6932 .