Design and optimization for truss constructions using the software package autodesk inventor 2011®
2011
Конференцијски прилог (Објављена верзија)
,
Faculty of Mechanical Engineering Kraljevo
Метаподаци
Приказ свих података о документуАпстракт
The use of truss constructions is frequent in mechanical engineering. This paper describes the procedures of construction and optimization for truss constrictions at the example of roof structure of the Hall. Frame Analysis is used to understand the structural integrity for given frame with respect to deformations and stresses, when subjected to various loading and constraints. Once when the criteria are defined, it is possible to run the simulation and view the behavior relative to the conditions which are defined. Simulations help to identify performance issues and find better design alternatives. The paper doesn't gives the analysis of load,but structure optimization is performed for defined load.In the process were used two approaches, change of beam geometry without changing the profile and change the profile without changing beam geometry.
Кључне речи:
Truss constructions / autodesk Inventor 2011 / frame analysis / optimizationИзвор:
VII Triennial International Conference Heavy Machinery – HM 2011, 2011, 29-32Издавач:
- Kraljevo : Faculty of Mechanical and Civil Engineering
Финансирање / пројекти:
- Развој технологија вишеосне обраде сложених алата за потребе домаће индустрије (RS-MESTD-MPN2006-2010-14034)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Mladenović, Goran AU - Popović, Mihajlo PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6928 AB - The use of truss constructions is frequent in mechanical engineering. This paper describes the procedures of construction and optimization for truss constrictions at the example of roof structure of the Hall. Frame Analysis is used to understand the structural integrity for given frame with respect to deformations and stresses, when subjected to various loading and constraints. Once when the criteria are defined, it is possible to run the simulation and view the behavior relative to the conditions which are defined. Simulations help to identify performance issues and find better design alternatives. The paper doesn't gives the analysis of load,but structure optimization is performed for defined load.In the process were used two approaches, change of beam geometry without changing the profile and change the profile without changing beam geometry. PB - Kraljevo : Faculty of Mechanical and Civil Engineering C3 - VII Triennial International Conference Heavy Machinery – HM 2011 T1 - Design and optimization for truss constructions using the software package autodesk inventor 2011® EP - 32 SP - 29 UR - https://hdl.handle.net/21.15107/rcub_machinery_6928 ER -
@conference{ author = "Mladenović, Goran and Popović, Mihajlo", year = "2011", abstract = "The use of truss constructions is frequent in mechanical engineering. This paper describes the procedures of construction and optimization for truss constrictions at the example of roof structure of the Hall. Frame Analysis is used to understand the structural integrity for given frame with respect to deformations and stresses, when subjected to various loading and constraints. Once when the criteria are defined, it is possible to run the simulation and view the behavior relative to the conditions which are defined. Simulations help to identify performance issues and find better design alternatives. The paper doesn't gives the analysis of load,but structure optimization is performed for defined load.In the process were used two approaches, change of beam geometry without changing the profile and change the profile without changing beam geometry.", publisher = "Kraljevo : Faculty of Mechanical and Civil Engineering", journal = "VII Triennial International Conference Heavy Machinery – HM 2011", title = "Design and optimization for truss constructions using the software package autodesk inventor 2011®", pages = "32-29", url = "https://hdl.handle.net/21.15107/rcub_machinery_6928" }
Mladenović, G.,& Popović, M.. (2011). Design and optimization for truss constructions using the software package autodesk inventor 2011®. in VII Triennial International Conference Heavy Machinery – HM 2011 Kraljevo : Faculty of Mechanical and Civil Engineering., 29-32. https://hdl.handle.net/21.15107/rcub_machinery_6928
Mladenović G, Popović M. Design and optimization for truss constructions using the software package autodesk inventor 2011®. in VII Triennial International Conference Heavy Machinery – HM 2011. 2011;:29-32. https://hdl.handle.net/21.15107/rcub_machinery_6928 .
Mladenović, Goran, Popović, Mihajlo, "Design and optimization for truss constructions using the software package autodesk inventor 2011®" in VII Triennial International Conference Heavy Machinery – HM 2011 (2011):29-32, https://hdl.handle.net/21.15107/rcub_machinery_6928 .