Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader
Само за регистроване кориснике
2023
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The paper presents the methodology of identification and
analysis of stoppages in mining machinery. Methodological steps are aimed at
isolating stoppages grouped by type of cause and summarized according to
criteria: frequency of occurrence and down time in minutes. In addition to the set
criteria, the paper also took into account the human factor, i.e. the operators of the
observed mining machines. Mining machinery operators` attitudes were surveyed
through a questionnaire covering several areas of occupational safety and health.
The experimental part of the research included 13 mining machines, and then, on
the example of a wheel loader, the key causes of down time were identified and the
attitudes of the operators of this machine were analyzed in terms of aspects of
occupational safety and health, because this mining machine had the longest down
time in the sample. In the final deliberations, it was concluded that the
organizational environment affects reduced safety and... health at work, that is, that
the accelerated work rhythm leads to negligent use of the machine and absence
from safety procedures. Finally, research indicates that by work planning and
organizing that does not impose an accelerated work rhythm, safety and health at
work can be significantly improved.
Кључне речи:
Mining machinery downtimes / Occupational safety and healthИзвор:
14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings, 2023, 14, 97-106Издавач:
- DQM Research Center
Финансирање / пројекти:
- SmartMiner - Support Systems for Smart, Ergonomic and Sustainable Mining Machinery Workplaces (RS-ScienceFundRS-Zeleni-5151)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Misita, Mirjana AU - Spasojević Brkić, Vesna AU - Brkić, Aleksandar AU - Perišić, Martina AU - Papić, Neda PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6923 AB - The paper presents the methodology of identification and analysis of stoppages in mining machinery. Methodological steps are aimed at isolating stoppages grouped by type of cause and summarized according to criteria: frequency of occurrence and down time in minutes. In addition to the set criteria, the paper also took into account the human factor, i.e. the operators of the observed mining machines. Mining machinery operators` attitudes were surveyed through a questionnaire covering several areas of occupational safety and health. The experimental part of the research included 13 mining machines, and then, on the example of a wheel loader, the key causes of down time were identified and the attitudes of the operators of this machine were analyzed in terms of aspects of occupational safety and health, because this mining machine had the longest down time in the sample. In the final deliberations, it was concluded that the organizational environment affects reduced safety and health at work, that is, that the accelerated work rhythm leads to negligent use of the machine and absence from safety procedures. Finally, research indicates that by work planning and organizing that does not impose an accelerated work rhythm, safety and health at work can be significantly improved. PB - DQM Research Center C3 - 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings T1 - Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader EP - 106 SP - 97 VL - 14 UR - https://hdl.handle.net/21.15107/rcub_machinery_6923 ER -
@conference{ author = "Misita, Mirjana and Spasojević Brkić, Vesna and Brkić, Aleksandar and Perišić, Martina and Papić, Neda", year = "2023", abstract = "The paper presents the methodology of identification and analysis of stoppages in mining machinery. Methodological steps are aimed at isolating stoppages grouped by type of cause and summarized according to criteria: frequency of occurrence and down time in minutes. In addition to the set criteria, the paper also took into account the human factor, i.e. the operators of the observed mining machines. Mining machinery operators` attitudes were surveyed through a questionnaire covering several areas of occupational safety and health. The experimental part of the research included 13 mining machines, and then, on the example of a wheel loader, the key causes of down time were identified and the attitudes of the operators of this machine were analyzed in terms of aspects of occupational safety and health, because this mining machine had the longest down time in the sample. In the final deliberations, it was concluded that the organizational environment affects reduced safety and health at work, that is, that the accelerated work rhythm leads to negligent use of the machine and absence from safety procedures. Finally, research indicates that by work planning and organizing that does not impose an accelerated work rhythm, safety and health at work can be significantly improved.", publisher = "DQM Research Center", journal = "14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings", title = "Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader", pages = "106-97", volume = "14", url = "https://hdl.handle.net/21.15107/rcub_machinery_6923" }
Misita, M., Spasojević Brkić, V., Brkić, A., Perišić, M.,& Papić, N.. (2023). Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader. in 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings DQM Research Center., 14, 97-106. https://hdl.handle.net/21.15107/rcub_machinery_6923
Misita M, Spasojević Brkić V, Brkić A, Perišić M, Papić N. Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader. in 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings. 2023;14:97-106. https://hdl.handle.net/21.15107/rcub_machinery_6923 .
Misita, Mirjana, Spasojević Brkić, Vesna, Brkić, Aleksandar, Perišić, Martina, Papić, Neda, "Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader" in 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings, 14 (2023):97-106, https://hdl.handle.net/21.15107/rcub_machinery_6923 .