Numerical and analytical modeling of elastic-plastic fracture mechanics parameters
Апстракт
Structural integrity and service reliability depend on the fracture resistance of a material. Cracks in the material are the locations of stress concentration, and elastic-plastic deformation can occur causing the development of mixed-mode type of fracture ahead the crack tip. Crack behavior in the elastic-plastic region is analyzed applying numerical and analytical simulation based on fracture mechanics parameters, characterizing the response of the material at the crack tip. Numerical and analytical results are compared with the corresponding experimental results obtained in previously performed fracture mechanics tests with standard single-edge notch bending SEN(B) specimens. The comparison shows an acceptable level of agreement, enabling application of the proposed numerical model of crack growth in the mixed-mode fracture analysis for structural integrity assessment.
Кључне речи:
structural integrity / numerical modelling / fracture mechanics parameters / elastic-plastic analysisИзвор:
Materials Science Forum, 2007, 555, 565-570Издавач:
- Trans Tech Publications Ltd
DOI: 10.4028/0-87849-441-3.565
ISSN: 0255-5476
WoS: 000249653700091
Scopus: 2-s2.0-38349039439
Институција/група
Inovacioni centarTY - CONF AU - Milović, Ljubica AU - Sedmak, Aleksandar AU - Sedmak, S. AU - Putić, Slaviša AU - Zrilić, Milorad PY - 2007 UR - https://machinery.mas.bg.ac.rs/handle/123456789/676 AB - Structural integrity and service reliability depend on the fracture resistance of a material. Cracks in the material are the locations of stress concentration, and elastic-plastic deformation can occur causing the development of mixed-mode type of fracture ahead the crack tip. Crack behavior in the elastic-plastic region is analyzed applying numerical and analytical simulation based on fracture mechanics parameters, characterizing the response of the material at the crack tip. Numerical and analytical results are compared with the corresponding experimental results obtained in previously performed fracture mechanics tests with standard single-edge notch bending SEN(B) specimens. The comparison shows an acceptable level of agreement, enabling application of the proposed numerical model of crack growth in the mixed-mode fracture analysis for structural integrity assessment. PB - Trans Tech Publications Ltd C3 - Materials Science Forum T1 - Numerical and analytical modeling of elastic-plastic fracture mechanics parameters EP - 570 SP - 565 VL - 555 DO - 10.4028/0-87849-441-3.565 ER -
@conference{ author = "Milović, Ljubica and Sedmak, Aleksandar and Sedmak, S. and Putić, Slaviša and Zrilić, Milorad", year = "2007", abstract = "Structural integrity and service reliability depend on the fracture resistance of a material. Cracks in the material are the locations of stress concentration, and elastic-plastic deformation can occur causing the development of mixed-mode type of fracture ahead the crack tip. Crack behavior in the elastic-plastic region is analyzed applying numerical and analytical simulation based on fracture mechanics parameters, characterizing the response of the material at the crack tip. Numerical and analytical results are compared with the corresponding experimental results obtained in previously performed fracture mechanics tests with standard single-edge notch bending SEN(B) specimens. The comparison shows an acceptable level of agreement, enabling application of the proposed numerical model of crack growth in the mixed-mode fracture analysis for structural integrity assessment.", publisher = "Trans Tech Publications Ltd", journal = "Materials Science Forum", title = "Numerical and analytical modeling of elastic-plastic fracture mechanics parameters", pages = "570-565", volume = "555", doi = "10.4028/0-87849-441-3.565" }
Milović, L., Sedmak, A., Sedmak, S., Putić, S.,& Zrilić, M.. (2007). Numerical and analytical modeling of elastic-plastic fracture mechanics parameters. in Materials Science Forum Trans Tech Publications Ltd., 555, 565-570. https://doi.org/10.4028/0-87849-441-3.565
Milović L, Sedmak A, Sedmak S, Putić S, Zrilić M. Numerical and analytical modeling of elastic-plastic fracture mechanics parameters. in Materials Science Forum. 2007;555:565-570. doi:10.4028/0-87849-441-3.565 .
Milović, Ljubica, Sedmak, Aleksandar, Sedmak, S., Putić, Slaviša, Zrilić, Milorad, "Numerical and analytical modeling of elastic-plastic fracture mechanics parameters" in Materials Science Forum, 555 (2007):565-570, https://doi.org/10.4028/0-87849-441-3.565 . .