Dual Port Induction System for DMB 1.4 MPI Engine
Апстракт
The paper presents the research results of DMB 1.4 l spark ignition engine equipped with prototype variable induction system. This variable geometry induction system was developed in order to investigate the possibilities of improving induction generated swirl and turbulence in combustion chamber and in this way to accelerate combustion, especially at low load engine condition. Induction channel in engine head was separated longitudinally into two sections using thin tin longitudinal wall and deflector valve at channel entrance was used to direct air flow into half channel cross section (at low engine load) or to enable full channel cross section (at full load). The results of combustion analysis show that combustion is accelerated and cycle variations are reduced at certain working conditions. In addition, specific fuel consumption is reduced, but very small, smaller than it was expected. Further geometry optimization and appropriate process managing is required.
Кључне речи:
spark ignition engine / variable induction geometry / cylinder pressure recording / combustion analysisИзвор:
Proceedings of the 10th international conference on accomplishments in electrical and mechanical enginnering and information technology DEMI 2011, 2011, 651-659Издавач:
- Faculty of Mechanical Engineering Banja Luka
Финансирање / пројекти:
- Истраживање и развој алтернативних погонских система и горива за градске аутобусе и комунална возила ради побољшања енергетске ефикасности и еколошких карактеристика (RS-MESTD-Technological Development (TD or TR)-35042)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Tomić, Miroljub AU - Petrović, Stojan AU - Popović, Slobodan AU - Miljić, Nenad PY - 2011 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6745 AB - The paper presents the research results of DMB 1.4 l spark ignition engine equipped with prototype variable induction system. This variable geometry induction system was developed in order to investigate the possibilities of improving induction generated swirl and turbulence in combustion chamber and in this way to accelerate combustion, especially at low load engine condition. Induction channel in engine head was separated longitudinally into two sections using thin tin longitudinal wall and deflector valve at channel entrance was used to direct air flow into half channel cross section (at low engine load) or to enable full channel cross section (at full load). The results of combustion analysis show that combustion is accelerated and cycle variations are reduced at certain working conditions. In addition, specific fuel consumption is reduced, but very small, smaller than it was expected. Further geometry optimization and appropriate process managing is required. PB - Faculty of Mechanical Engineering Banja Luka C3 - Proceedings of the 10th international conference on accomplishments in electrical and mechanical enginnering and information technology DEMI 2011 T1 - Dual Port Induction System for DMB 1.4 MPI Engine EP - 659 SP - 651 UR - https://hdl.handle.net/21.15107/rcub_machinery_6745 ER -
@conference{ author = "Tomić, Miroljub and Petrović, Stojan and Popović, Slobodan and Miljić, Nenad", year = "2011", abstract = "The paper presents the research results of DMB 1.4 l spark ignition engine equipped with prototype variable induction system. This variable geometry induction system was developed in order to investigate the possibilities of improving induction generated swirl and turbulence in combustion chamber and in this way to accelerate combustion, especially at low load engine condition. Induction channel in engine head was separated longitudinally into two sections using thin tin longitudinal wall and deflector valve at channel entrance was used to direct air flow into half channel cross section (at low engine load) or to enable full channel cross section (at full load). The results of combustion analysis show that combustion is accelerated and cycle variations are reduced at certain working conditions. In addition, specific fuel consumption is reduced, but very small, smaller than it was expected. Further geometry optimization and appropriate process managing is required.", publisher = "Faculty of Mechanical Engineering Banja Luka", journal = "Proceedings of the 10th international conference on accomplishments in electrical and mechanical enginnering and information technology DEMI 2011", title = "Dual Port Induction System for DMB 1.4 MPI Engine", pages = "659-651", url = "https://hdl.handle.net/21.15107/rcub_machinery_6745" }
Tomić, M., Petrović, S., Popović, S.,& Miljić, N.. (2011). Dual Port Induction System for DMB 1.4 MPI Engine. in Proceedings of the 10th international conference on accomplishments in electrical and mechanical enginnering and information technology DEMI 2011 Faculty of Mechanical Engineering Banja Luka., 651-659. https://hdl.handle.net/21.15107/rcub_machinery_6745
Tomić M, Petrović S, Popović S, Miljić N. Dual Port Induction System for DMB 1.4 MPI Engine. in Proceedings of the 10th international conference on accomplishments in electrical and mechanical enginnering and information technology DEMI 2011. 2011;:651-659. https://hdl.handle.net/21.15107/rcub_machinery_6745 .
Tomić, Miroljub, Petrović, Stojan, Popović, Slobodan, Miljić, Nenad, "Dual Port Induction System for DMB 1.4 MPI Engine" in Proceedings of the 10th international conference on accomplishments in electrical and mechanical enginnering and information technology DEMI 2011 (2011):651-659, https://hdl.handle.net/21.15107/rcub_machinery_6745 .