CAD/CAM kalupa kompozitne lopatice rotora helikoptera
CAD/CAM of mold for helicopter rotor composite blade
![](/themes/Miragemashinery//images/openAccess.png)
2005
Authors
Simonović, Aleksandar![](/themes/Miragemashinery/images/orcid.png)
Živanović, Saša
![](/themes/Miragemashinery/images/orcid.png)
Contributors
Tanović, LjubodragPuzović, Radovan
![](/themes/Miragemashinery/images/orcid.png)
Popović, Mihajlo
![](/themes/Miragemashinery/images/orcid.png)
Slavković, Goran
Nešić, Nenad
Conference object (Published version)
![](/themes/Miragemashinery//images/creativecommons/arr.png)
Metadata
Show full item recordAbstract
U radu se predstavlja programiranje primenom CAD/CAM sistema, udubljenja u kalupu za lopaticu glavnog rotora helikoptera. Pri proizvodnji ovakvih lopatica neophodno je postići visoku geometrijsku tačnost. Zbog velikih dimenzija duž jedne ose za izradu je planiran segmentni kalup. U radu je pokazana procedura programiranja za jedan takav segment kalupa. Ostvarena je simulacija putanje alata, dobijanje APT i NC koda kao i verifikacija putanje simulacijom uklanjanja materijala. Za realizaciju je korišćeno okruženje progama CATIA V5.
This paper shows CAD/CAM technique of mold recess for helicopter main rotor blade. It is necessary to achieve high precision in this process. Due to the dimensions along one of the blade axis, the segmented mold is found necessary. In this paper the programming procedure is shown for one of these mold segments. The tool path simulation is shown as well as producing of APT and NC code with the verification of material removal. For realization of these processes CATIA’s tools were used.
Source:
31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova, 2005, 2.15-2.18Publisher:
- Univerzitet u Beogradu, Mašinski fakultet
Note:
- Tehnički urednici: Prof. dr Ljubodrag Tanović, Doc. dr Radovan Puzović, Mr Mihajlo Popović, Mr Goran Slavković Nenad Nešić, dipl. maš. ing.
Collections
Institution/Community
Mašinski fakultetTY - CONF AU - Simonović, Aleksandar AU - Živanović, Saša PY - 2005 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6591 AB - U radu se predstavlja programiranje primenom CAD/CAM sistema, udubljenja u kalupu za lopaticu glavnog rotora helikoptera. Pri proizvodnji ovakvih lopatica neophodno je postići visoku geometrijsku tačnost. Zbog velikih dimenzija duž jedne ose za izradu je planiran segmentni kalup. U radu je pokazana procedura programiranja za jedan takav segment kalupa. Ostvarena je simulacija putanje alata, dobijanje APT i NC koda kao i verifikacija putanje simulacijom uklanjanja materijala. Za realizaciju je korišćeno okruženje progama CATIA V5. AB - This paper shows CAD/CAM technique of mold recess for helicopter main rotor blade. It is necessary to achieve high precision in this process. Due to the dimensions along one of the blade axis, the segmented mold is found necessary. In this paper the programming procedure is shown for one of these mold segments. The tool path simulation is shown as well as producing of APT and NC code with the verification of material removal. For realization of these processes CATIA’s tools were used. PB - Univerzitet u Beogradu, Mašinski fakultet C3 - 31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova T1 - CAD/CAM kalupa kompozitne lopatice rotora helikoptera T1 - CAD/CAM of mold for helicopter rotor composite blade EP - 2.18 SP - 2.15 UR - https://hdl.handle.net/21.15107/rcub_machinery_6591 ER -
@conference{ author = "Simonović, Aleksandar and Živanović, Saša", year = "2005", abstract = "U radu se predstavlja programiranje primenom CAD/CAM sistema, udubljenja u kalupu za lopaticu glavnog rotora helikoptera. Pri proizvodnji ovakvih lopatica neophodno je postići visoku geometrijsku tačnost. Zbog velikih dimenzija duž jedne ose za izradu je planiran segmentni kalup. U radu je pokazana procedura programiranja za jedan takav segment kalupa. Ostvarena je simulacija putanje alata, dobijanje APT i NC koda kao i verifikacija putanje simulacijom uklanjanja materijala. Za realizaciju je korišćeno okruženje progama CATIA V5., This paper shows CAD/CAM technique of mold recess for helicopter main rotor blade. It is necessary to achieve high precision in this process. Due to the dimensions along one of the blade axis, the segmented mold is found necessary. In this paper the programming procedure is shown for one of these mold segments. The tool path simulation is shown as well as producing of APT and NC code with the verification of material removal. For realization of these processes CATIA’s tools were used.", publisher = "Univerzitet u Beogradu, Mašinski fakultet", journal = "31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova", title = "CAD/CAM kalupa kompozitne lopatice rotora helikoptera, CAD/CAM of mold for helicopter rotor composite blade", pages = "2.18-2.15", url = "https://hdl.handle.net/21.15107/rcub_machinery_6591" }
Simonović, A.,& Živanović, S.. (2005). CAD/CAM kalupa kompozitne lopatice rotora helikoptera. in 31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova Univerzitet u Beogradu, Mašinski fakultet., 2.15-2.18. https://hdl.handle.net/21.15107/rcub_machinery_6591
Simonović A, Živanović S. CAD/CAM kalupa kompozitne lopatice rotora helikoptera. in 31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova. 2005;:2.15-2.18. https://hdl.handle.net/21.15107/rcub_machinery_6591 .
Simonović, Aleksandar, Živanović, Saša, "CAD/CAM kalupa kompozitne lopatice rotora helikoptera" in 31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova (2005):2.15-2.18, https://hdl.handle.net/21.15107/rcub_machinery_6591 .