The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
Само за регистроване кориснике
2006
Аутори
Pavlović, Vera P.Nikolić, Maria Vesna
Spasojević, V.
Blanuša, Jovan
Živković, Ljiljana
Stojanović, Biljana D.
Pavlović, Vladimir B.
Ristić, Momčilo M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380°C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380°C with heating rates of 10, 20 and 30°C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.
Кључне речи:
tribophysical activation / sintering / BaTiO3Извор:
Materials Science Forum, 2006, 514-516, 1566-1570Издавач:
- Trans Tech Publications Ltd, Durnten-Zurich
DOI: 10.4028/www.scientific.net/MSF.514-516.1566
ISSN: 0255-5476
WoS: 000238056400310
Scopus: 2-s2.0-37849024310
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Pavlović, Vera P. AU - Nikolić, Maria Vesna AU - Spasojević, V. AU - Blanuša, Jovan AU - Živković, Ljiljana AU - Stojanović, Biljana D. AU - Pavlović, Vladimir B. AU - Ristić, Momčilo M. PY - 2006 UR - https://machinery.mas.bg.ac.rs/handle/123456789/655 AB - In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380°C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380°C with heating rates of 10, 20 and 30°C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis. PB - Trans Tech Publications Ltd, Durnten-Zurich T2 - Materials Science Forum T1 - The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics EP - 1570 SP - 1566 VL - 514-516 DO - 10.4028/www.scientific.net/MSF.514-516.1566 ER -
@article{ author = "Pavlović, Vera P. and Nikolić, Maria Vesna and Spasojević, V. and Blanuša, Jovan and Živković, Ljiljana and Stojanović, Biljana D. and Pavlović, Vladimir B. and Ristić, Momčilo M.", year = "2006", abstract = "In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380°C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380°C with heating rates of 10, 20 and 30°C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.", publisher = "Trans Tech Publications Ltd, Durnten-Zurich", journal = "Materials Science Forum", title = "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics", pages = "1570-1566", volume = "514-516", doi = "10.4028/www.scientific.net/MSF.514-516.1566" }
Pavlović, V. P., Nikolić, M. V., Spasojević, V., Blanuša, J., Živković, L., Stojanović, B. D., Pavlović, V. B.,& Ristić, M. M.. (2006). The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Materials Science Forum Trans Tech Publications Ltd, Durnten-Zurich., 514-516, 1566-1570. https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566
Pavlović VP, Nikolić MV, Spasojević V, Blanuša J, Živković L, Stojanović BD, Pavlović VB, Ristić MM. The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Materials Science Forum. 2006;514-516:1566-1570. doi:10.4028/www.scientific.net/MSF.514-516.1566 .
Pavlović, Vera P., Nikolić, Maria Vesna, Spasojević, V., Blanuša, Jovan, Živković, Ljiljana, Stojanović, Biljana D., Pavlović, Vladimir B., Ristić, Momčilo M., "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics" in Materials Science Forum, 514-516 (2006):1566-1570, https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 . .