PREDAVANJE PO POZIVU: THE NATIONAL STANDARD FOR VELOCIMETRY AND POSSIBILITIES FOR IT IN SERBIA
Апстракт
Velocimetry has a long tradition in Serbia. Anyhow, constant improvement of the
laboratories calibration and measurement capabilities (CMC) is an ongoing effort. Serbia, although
it has good capabilities in this field, still doesn’t have a national standard for velocimetry. Reliable
velocimetry is a starting point in various sectors of energy production, numerous industrial
branches, health, educational, business and sport centers, as well as in residential buildings, and etc.
Realization of this national standard would influence and improve national industry capabilities,
energy efficiency in general, health and environmental protection procedures, climate analysis,
forecasts and hydrology. Various international and national standards treat velocimetry, especially,
as a tool in determination of the flow rate in closed conduits and open channels. This opens a whole
new area of validation of the volume flow rate calibration in laboratory, as well as in situ. In this
paper will... be presented novel velocimetry techniques and their capabilities implemented in the
Laboratory for turbulence and velocimetry at the Faculty of Mechanical Engineering. Here are
presented following measurement techniques: multihole probes, hot-wire anemometry, laser
Doppler velocimetry (three-component) and image-based velocimetry techniques (particle image
velocimetry (PIV) and micro PIV). In the Laboratory are implemented stereo PIV and high speed
stereo PIV. In addition to this, constant upgrading of the existing systems is followed by the
development of the new techniques and procedures. These complex measurement techniques are
employed in research of various flow phenomena, what will be presented in short.
Кључне речи:
velocimetry / national standard / calibration / turbulenceИзвор:
FULL PAPERS PROCEEDINGS OF INTERNATIONAL CONFERENCE "IEEP 2022", NOVEMBER 08-09, 2022, FACULTY OF MECHANICAL ENGINEERING OF THE UNIVERSITY OF BELGRADE, BELGRADE, SERBIA, 2022, 241-Издавач:
- SOCIETY OF THERMAL ENGINEERS OF SERBIA
Финансирање / пројекти:
- Science Fund of the Republic of Serbia, Program DIASPORA, Project “Flow investigation within innovative designed regulative element of the control valve”, #6385782, acronym FIDE
- Ministry of Education, Science, and Technological Development, Republic of Serbia, grant number 451-03-68/2022-14/200105, subproject TR35046
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
- info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35046/RS/ (-)
Напомена:
- Title: Programme & Full Papers Proceedings of IEEP 2022 Publisher: Society of Thermal Engineers of Serbia 11001 Belgrade, P.O. Box 522, Serbia For the publisher: Prof. Milan Radovanović, President of the Society of Thermal Engineers of Serbia Editors: Dr Dejan Cvetinović VINČA Institute of Nuclear Sciences, Belgrade, Serbia Prof. Goran Jankes and Assoc. Prof. Mirjana Stamenić Faculty of Mechanical Engineering, University of Belgrade
URI
https://ieep-2022.drustvo-termicara.com/bookhttps://machinery.mas.bg.ac.rs/handle/123456789/6335
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Čantrak, Đorđe PY - 2022 UR - https://ieep-2022.drustvo-termicara.com/book UR - https://machinery.mas.bg.ac.rs/handle/123456789/6335 AB - Velocimetry has a long tradition in Serbia. Anyhow, constant improvement of the laboratories calibration and measurement capabilities (CMC) is an ongoing effort. Serbia, although it has good capabilities in this field, still doesn’t have a national standard for velocimetry. Reliable velocimetry is a starting point in various sectors of energy production, numerous industrial branches, health, educational, business and sport centers, as well as in residential buildings, and etc. Realization of this national standard would influence and improve national industry capabilities, energy efficiency in general, health and environmental protection procedures, climate analysis, forecasts and hydrology. Various international and national standards treat velocimetry, especially, as a tool in determination of the flow rate in closed conduits and open channels. This opens a whole new area of validation of the volume flow rate calibration in laboratory, as well as in situ. In this paper will be presented novel velocimetry techniques and their capabilities implemented in the Laboratory for turbulence and velocimetry at the Faculty of Mechanical Engineering. Here are presented following measurement techniques: multihole probes, hot-wire anemometry, laser Doppler velocimetry (three-component) and image-based velocimetry techniques (particle image velocimetry (PIV) and micro PIV). In the Laboratory are implemented stereo PIV and high speed stereo PIV. In addition to this, constant upgrading of the existing systems is followed by the development of the new techniques and procedures. These complex measurement techniques are employed in research of various flow phenomena, what will be presented in short. PB - SOCIETY OF THERMAL ENGINEERS OF SERBIA C3 - FULL PAPERS PROCEEDINGS OF INTERNATIONAL CONFERENCE "IEEP 2022", NOVEMBER 08-09, 2022, FACULTY OF MECHANICAL ENGINEERING OF THE UNIVERSITY OF BELGRADE, BELGRADE, SERBIA T1 - PREDAVANJE PO POZIVU: THE NATIONAL STANDARD FOR VELOCIMETRY AND POSSIBILITIES FOR IT IN SERBIA SP - 241 UR - https://hdl.handle.net/21.15107/rcub_machinery_6335 ER -
@conference{ author = "Čantrak, Đorđe", year = "2022", abstract = "Velocimetry has a long tradition in Serbia. Anyhow, constant improvement of the laboratories calibration and measurement capabilities (CMC) is an ongoing effort. Serbia, although it has good capabilities in this field, still doesn’t have a national standard for velocimetry. Reliable velocimetry is a starting point in various sectors of energy production, numerous industrial branches, health, educational, business and sport centers, as well as in residential buildings, and etc. Realization of this national standard would influence and improve national industry capabilities, energy efficiency in general, health and environmental protection procedures, climate analysis, forecasts and hydrology. Various international and national standards treat velocimetry, especially, as a tool in determination of the flow rate in closed conduits and open channels. This opens a whole new area of validation of the volume flow rate calibration in laboratory, as well as in situ. In this paper will be presented novel velocimetry techniques and their capabilities implemented in the Laboratory for turbulence and velocimetry at the Faculty of Mechanical Engineering. Here are presented following measurement techniques: multihole probes, hot-wire anemometry, laser Doppler velocimetry (three-component) and image-based velocimetry techniques (particle image velocimetry (PIV) and micro PIV). In the Laboratory are implemented stereo PIV and high speed stereo PIV. In addition to this, constant upgrading of the existing systems is followed by the development of the new techniques and procedures. These complex measurement techniques are employed in research of various flow phenomena, what will be presented in short.", publisher = "SOCIETY OF THERMAL ENGINEERS OF SERBIA", journal = "FULL PAPERS PROCEEDINGS OF INTERNATIONAL CONFERENCE "IEEP 2022", NOVEMBER 08-09, 2022, FACULTY OF MECHANICAL ENGINEERING OF THE UNIVERSITY OF BELGRADE, BELGRADE, SERBIA", title = "PREDAVANJE PO POZIVU: THE NATIONAL STANDARD FOR VELOCIMETRY AND POSSIBILITIES FOR IT IN SERBIA", pages = "241", url = "https://hdl.handle.net/21.15107/rcub_machinery_6335" }
Čantrak, Đ.. (2022). PREDAVANJE PO POZIVU: THE NATIONAL STANDARD FOR VELOCIMETRY AND POSSIBILITIES FOR IT IN SERBIA. in FULL PAPERS PROCEEDINGS OF INTERNATIONAL CONFERENCE "IEEP 2022", NOVEMBER 08-09, 2022, FACULTY OF MECHANICAL ENGINEERING OF THE UNIVERSITY OF BELGRADE, BELGRADE, SERBIA SOCIETY OF THERMAL ENGINEERS OF SERBIA., 241. https://hdl.handle.net/21.15107/rcub_machinery_6335
Čantrak Đ. PREDAVANJE PO POZIVU: THE NATIONAL STANDARD FOR VELOCIMETRY AND POSSIBILITIES FOR IT IN SERBIA. in FULL PAPERS PROCEEDINGS OF INTERNATIONAL CONFERENCE "IEEP 2022", NOVEMBER 08-09, 2022, FACULTY OF MECHANICAL ENGINEERING OF THE UNIVERSITY OF BELGRADE, BELGRADE, SERBIA. 2022;:241. https://hdl.handle.net/21.15107/rcub_machinery_6335 .
Čantrak, Đorđe, "PREDAVANJE PO POZIVU: THE NATIONAL STANDARD FOR VELOCIMETRY AND POSSIBILITIES FOR IT IN SERBIA" in FULL PAPERS PROCEEDINGS OF INTERNATIONAL CONFERENCE "IEEP 2022", NOVEMBER 08-09, 2022, FACULTY OF MECHANICAL ENGINEERING OF THE UNIVERSITY OF BELGRADE, BELGRADE, SERBIA (2022):241, https://hdl.handle.net/21.15107/rcub_machinery_6335 .