Repair welding of gear shafts of service rollers at Železara Smederevo
Апстракт
Presented in this paper are two methods for repair welding of a total of 8 gear shafts (toothed shafts) of service rollers in the "Topla valjaonica" rolling mill within Železara Smederevo. Damage that occurs in these shafts is a consequence of exploitation conditions, which lead to lateral wear of the tooth up to one half of its thickness, due to adhesion and surface fatigue. Shown in the following text are the procedures for repair welding of gear shafts, including manual arc welding (MAW procedure) and the automatic welding procedure (FCAW). In addition, the requirements that need to be fulfilled in order to successfully perform the repair welding, so that the repaired pars can be exploited again, are presented. The techno-economical analysis had confirmed the technological and economical justifiability of applying this repair welding methods, compared to purchasing of new parts.
Кључне речи:
repair welding / gear shaft / wear / techno-economical analysisИзвор:
PROCEEDINGS OF THE 8 th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017, 2017, 365-370Финансирање / пројекти:
- Интегритет опреме под притиском при истовременом деловању замарајућег оптерећења и температуре (RS-MESTD-Technological Development (TD or TR)-35011)
- Развој савремених метода дијагностике и испитивања машинских структура (RS-MESTD-Technological Development (TD or TR)-35040)
URI
https://www.scribd.com/document/431697800/International-Scientific-Conference-IRMES-2017https://machinery.mas.bg.ac.rs/handle/123456789/6174
Колекције
Институција/група
Inovacioni centarTY - CONF AU - Tanasković, Drakče AU - Đorđević, Branislav AU - Tatić, Uroš AU - Sedmak, Aleksandar AU - Opačić, Mirjana PY - 2017 UR - https://www.scribd.com/document/431697800/International-Scientific-Conference-IRMES-2017 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6174 AB - Presented in this paper are two methods for repair welding of a total of 8 gear shafts (toothed shafts) of service rollers in the "Topla valjaonica" rolling mill within Železara Smederevo. Damage that occurs in these shafts is a consequence of exploitation conditions, which lead to lateral wear of the tooth up to one half of its thickness, due to adhesion and surface fatigue. Shown in the following text are the procedures for repair welding of gear shafts, including manual arc welding (MAW procedure) and the automatic welding procedure (FCAW). In addition, the requirements that need to be fulfilled in order to successfully perform the repair welding, so that the repaired pars can be exploited again, are presented. The techno-economical analysis had confirmed the technological and economical justifiability of applying this repair welding methods, compared to purchasing of new parts. C3 - PROCEEDINGS OF THE 8 th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017 T1 - Repair welding of gear shafts of service rollers at Železara Smederevo EP - 370 SP - 365 UR - https://hdl.handle.net/21.15107/rcub_machinery_6174 ER -
@conference{ author = "Tanasković, Drakče and Đorđević, Branislav and Tatić, Uroš and Sedmak, Aleksandar and Opačić, Mirjana", year = "2017", abstract = "Presented in this paper are two methods for repair welding of a total of 8 gear shafts (toothed shafts) of service rollers in the "Topla valjaonica" rolling mill within Železara Smederevo. Damage that occurs in these shafts is a consequence of exploitation conditions, which lead to lateral wear of the tooth up to one half of its thickness, due to adhesion and surface fatigue. Shown in the following text are the procedures for repair welding of gear shafts, including manual arc welding (MAW procedure) and the automatic welding procedure (FCAW). In addition, the requirements that need to be fulfilled in order to successfully perform the repair welding, so that the repaired pars can be exploited again, are presented. The techno-economical analysis had confirmed the technological and economical justifiability of applying this repair welding methods, compared to purchasing of new parts.", journal = "PROCEEDINGS OF THE 8 th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017", title = "Repair welding of gear shafts of service rollers at Železara Smederevo", pages = "370-365", url = "https://hdl.handle.net/21.15107/rcub_machinery_6174" }
Tanasković, D., Đorđević, B., Tatić, U., Sedmak, A.,& Opačić, M.. (2017). Repair welding of gear shafts of service rollers at Železara Smederevo. in PROCEEDINGS OF THE 8 th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017, 365-370. https://hdl.handle.net/21.15107/rcub_machinery_6174
Tanasković D, Đorđević B, Tatić U, Sedmak A, Opačić M. Repair welding of gear shafts of service rollers at Železara Smederevo. in PROCEEDINGS OF THE 8 th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017. 2017;:365-370. https://hdl.handle.net/21.15107/rcub_machinery_6174 .
Tanasković, Drakče, Đorđević, Branislav, Tatić, Uroš, Sedmak, Aleksandar, Opačić, Mirjana, "Repair welding of gear shafts of service rollers at Železara Smederevo" in PROCEEDINGS OF THE 8 th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017 (2017):365-370, https://hdl.handle.net/21.15107/rcub_machinery_6174 .