Towards a Digital Measurement Twin Based on CMM
Само за регистроване кориснике
2021
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Towards a digital measurement twin (DMT) this paper presents an off-line DMT for CMM based on DMIS file. The measurement system based on CMM DEA-IOTA-2203 was used as a physical twin, and a virtual machine, generated after modelling and configuring in PTC Creo software of both the machine itself and the prismatic parts and fixture clamps, was employed as a digital twin. .ncl (DMIS) file was generated by programming the measuring path and simulation of the virtual CMM for standard types of tolerances in PTC Creo software and Manufacturing module. The analysis of the metrology of the measuring part, the bearing carrier, for the given forms of tolerance (location, perpendicularity, flatness, total runout) was performed. The components of the measuring machine and the assembly with defined kinematic connections are modelled. After simulation and generation of the output DMIS file in PTC Creo using virtual CMM, the real CMM DEA ‒ IOTA-2203 was programmed and measured on it. After the measur...ement, the measurement report is generated as a basic document with verified values, which unambiguously gives an insight into the true quality state of the measured part dimension. Consequently, the result of this paper is off-line DMT based on DMIS file.
Кључне речи:
Digital Twin / CMM / CAI / DMIS / Prismatic PartsИзвор:
Proceedings in Manufacturing Systems, 2021, 16, 1Издавач:
- Association ICMAS and University "Politehnica" of Bucharest
Финансирање / пројекти:
- Развој нове генерације домаћих обрадних система (RS-MESTD-Technological Development (TD or TR)-35022)
Напомена:
- Part of special issue: 30th edition of the International Conference on Manufacturing Systems – ICMaS 2021
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Majstorović, Vidosav AU - Stanić, Dušan AU - Stojadinović, Slavenko PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6142 AB - Towards a digital measurement twin (DMT) this paper presents an off-line DMT for CMM based on DMIS file. The measurement system based on CMM DEA-IOTA-2203 was used as a physical twin, and a virtual machine, generated after modelling and configuring in PTC Creo software of both the machine itself and the prismatic parts and fixture clamps, was employed as a digital twin. .ncl (DMIS) file was generated by programming the measuring path and simulation of the virtual CMM for standard types of tolerances in PTC Creo software and Manufacturing module. The analysis of the metrology of the measuring part, the bearing carrier, for the given forms of tolerance (location, perpendicularity, flatness, total runout) was performed. The components of the measuring machine and the assembly with defined kinematic connections are modelled. After simulation and generation of the output DMIS file in PTC Creo using virtual CMM, the real CMM DEA ‒ IOTA-2203 was programmed and measured on it. After the measurement, the measurement report is generated as a basic document with verified values, which unambiguously gives an insight into the true quality state of the measured part dimension. Consequently, the result of this paper is off-line DMT based on DMIS file. PB - Association ICMAS and University "Politehnica" of Bucharest T2 - Proceedings in Manufacturing Systems T1 - Towards a Digital Measurement Twin Based on CMM IS - 1 VL - 16 UR - https://hdl.handle.net/21.15107/rcub_machinery_6142 ER -
@article{ author = "Majstorović, Vidosav and Stanić, Dušan and Stojadinović, Slavenko", year = "2021", abstract = "Towards a digital measurement twin (DMT) this paper presents an off-line DMT for CMM based on DMIS file. The measurement system based on CMM DEA-IOTA-2203 was used as a physical twin, and a virtual machine, generated after modelling and configuring in PTC Creo software of both the machine itself and the prismatic parts and fixture clamps, was employed as a digital twin. .ncl (DMIS) file was generated by programming the measuring path and simulation of the virtual CMM for standard types of tolerances in PTC Creo software and Manufacturing module. The analysis of the metrology of the measuring part, the bearing carrier, for the given forms of tolerance (location, perpendicularity, flatness, total runout) was performed. The components of the measuring machine and the assembly with defined kinematic connections are modelled. After simulation and generation of the output DMIS file in PTC Creo using virtual CMM, the real CMM DEA ‒ IOTA-2203 was programmed and measured on it. After the measurement, the measurement report is generated as a basic document with verified values, which unambiguously gives an insight into the true quality state of the measured part dimension. Consequently, the result of this paper is off-line DMT based on DMIS file.", publisher = "Association ICMAS and University "Politehnica" of Bucharest", journal = "Proceedings in Manufacturing Systems", title = "Towards a Digital Measurement Twin Based on CMM", number = "1", volume = "16", url = "https://hdl.handle.net/21.15107/rcub_machinery_6142" }
Majstorović, V., Stanić, D.,& Stojadinović, S.. (2021). Towards a Digital Measurement Twin Based on CMM. in Proceedings in Manufacturing Systems Association ICMAS and University "Politehnica" of Bucharest., 16(1). https://hdl.handle.net/21.15107/rcub_machinery_6142
Majstorović V, Stanić D, Stojadinović S. Towards a Digital Measurement Twin Based on CMM. in Proceedings in Manufacturing Systems. 2021;16(1). https://hdl.handle.net/21.15107/rcub_machinery_6142 .
Majstorović, Vidosav, Stanić, Dušan, Stojadinović, Slavenko, "Towards a Digital Measurement Twin Based on CMM" in Proceedings in Manufacturing Systems, 16, no. 1 (2021), https://hdl.handle.net/21.15107/rcub_machinery_6142 .