Приказ основних података о документу
Razvoj sistema za automatsko projektovanje tehnologije predobrade delova sa složenim površinama
Development of a system for automatic technology design for pre-machining of parts with free form surfaces
dc.creator | Mladenović, Goran | |
dc.creator | Tanović, Ljubodrag | |
dc.creator | Milovanović, Marko | |
dc.creator | Popović, Mihajlo | |
dc.creator | Puzović, Radovan | |
dc.creator | Pjević, Miloš | |
dc.date.accessioned | 2023-03-13T21:35:36Z | |
dc.date.available | 2023-03-13T21:35:36Z | |
dc.date.issued | 2020 | |
dc.identifier.isbn | 978-86-6060-055-6 | |
dc.identifier.uri | https://machinery.mas.bg.ac.rs/handle/123456789/6092 | |
dc.description.abstract | Na Katedri za proizvodno mašinstvo Mašinskog fakulteta u Beogradu su sprovedena istraživanja na temu projektovanja tehnologije obrade delova sa složenim površinama, a prateći trend razvoja komercijalnih CAD/CAM sistema. U prethodnom periodu je akcenat bačen na proširenje prethodno razvojenog sistema za automatsko projektovanje tehnologije obrade i to za slučajeve kada nije moguća obrada cele površine loptastim glodalom već je potreban zahvat predobrade kojim bi se dobio približni oblik površine. Razvijeni sistem je implementiran u softversko rešenje kojim je izvršeno generisanje NC koda kojim su obrađeni delovi. Obradom na obradnom centru je izvršena verifikacija razvojenog sistema. | sr |
dc.description.abstract | Accompanying of development of commercial CAD / CAM systems, at the Department of Production Engineering of the Faculty of Mechanical Engineering in Belgrade, research was conducted on the topic of designing the technology of machining parts with free form surfaces. In the previous period, emphasis was placed on the expansion of the previously developed system for automatic manufacturing technology design, for cases when it is not possible to machine the entire surface with a ball end mill where a pre-machinig sequence is needed to obtain an approximate surface shape. The developed system is implemented in a software solution which generates NC code which is used for machining the parts. The experimental verification of the developed system was performed by machining at the machine center. | sr |
dc.language.iso | sr | sr |
dc.publisher | Univerzitet u Beogradu - Mašinski fakultet | sr |
dc.relation | info:eu-repo/grantAgreement/MESTD/inst-2020/200105/RS// | sr |
dc.rights | openAccess | sr |
dc.source | Zbornik radova 42. JUPITER konferencije, 29. simpozijum CAD/CAM | sr |
dc.subject | Složene površine | sr |
dc.subject | CAD/CAM sistemi | sr |
dc.subject | predobrada | sr |
dc.subject | vretenasto glodalo | sr |
dc.subject | Free form surfaces | sr |
dc.subject | CAD/CAM systems | sr |
dc.subject | pre-machining | sr |
dc.subject | end mill cutter | sr |
dc.title | Razvoj sistema za automatsko projektovanje tehnologije predobrade delova sa složenim površinama | sr |
dc.title | Development of a system for automatic technology design for pre-machining of parts with free form surfaces | sr |
dc.type | conferenceObject | sr |
dc.rights.license | ARR | sr |
dc.citation.epage | 2.6 | |
dc.citation.rank | M63 | |
dc.citation.rank | M63 | |
dc.citation.spage | 2.1 | |
dc.identifier.fulltext | http://machinery.mas.bg.ac.rs/bitstream/id/14978/JUP_2020goran_r.pdf | |
dc.identifier.rcub | https://hdl.handle.net/21.15107/rcub_machinery_6092 | |
dc.type.version | publishedVersion | sr |