Identification of the cause of incorrect work of bumper paint robot reducer
Само за регистроване кориснике
2022
Аутори
Maneski, TaškoMilošević-Mitić, Vesna
Milović, Ljubica
Jovanović, Miloš
Anđelić, Nina
Petrović, Ana
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Industrial robots are used for high-precision tasks and in intensive production. One of the most reliable methods for monitoring robots’ work is vibrodiagnostics, which provides recommendations and maintenance procedures, and also serves as a reliable diagnostic method for determining the causes of industrial robot failures. Connection of robot and the supporting structure is very important and it affects on dynamic behavior of the robot. This paper presents the process of diagnosing dynamic condition of the structure with painting robots, after the failure of the robot motion reducer. To analyze the causes of the failure, a numerical analysis was performed, which included: static calculation, dynamic calculation, determining transfer function in frequency domain and reinforcement factors. Supporting structure has very low eigen-frequencies (3,5 to 9.5 Hz), it cannot accept inertial forces and large deformations and resonant behavior occur. Using FEM analysis is shown that the behavio...r of the structure is unfavorable because 20 eigen-oscillations had a frequency less than 17 Hz, and all are located in the robots’ working space. Determination of the transfer functions showed that the dynamic gain factor in all three directions of the excitation force is extremely large, while the corresponding frequencies are 5 ÷ 20 Hz. It was determined that the main problem was the rigidity of the supporting structure.
Кључне речи:
Load-bearing structure / Vibrodiagnostic / Dynamic behaviourИзвор:
ECF23, European Conference on Fracture 2022, Procedia Structural Integrity, 2022Финансирање / пројекти:
- Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 200105 (University of Belgrade, Faculty of Mechanical Engineering)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Maneski, Taško AU - Milošević-Mitić, Vesna AU - Milović, Ljubica AU - Jovanović, Miloš AU - Anđelić, Nina AU - Petrović, Ana PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6015 AB - Industrial robots are used for high-precision tasks and in intensive production. One of the most reliable methods for monitoring robots’ work is vibrodiagnostics, which provides recommendations and maintenance procedures, and also serves as a reliable diagnostic method for determining the causes of industrial robot failures. Connection of robot and the supporting structure is very important and it affects on dynamic behavior of the robot. This paper presents the process of diagnosing dynamic condition of the structure with painting robots, after the failure of the robot motion reducer. To analyze the causes of the failure, a numerical analysis was performed, which included: static calculation, dynamic calculation, determining transfer function in frequency domain and reinforcement factors. Supporting structure has very low eigen-frequencies (3,5 to 9.5 Hz), it cannot accept inertial forces and large deformations and resonant behavior occur. Using FEM analysis is shown that the behavior of the structure is unfavorable because 20 eigen-oscillations had a frequency less than 17 Hz, and all are located in the robots’ working space. Determination of the transfer functions showed that the dynamic gain factor in all three directions of the excitation force is extremely large, while the corresponding frequencies are 5 ÷ 20 Hz. It was determined that the main problem was the rigidity of the supporting structure. C3 - ECF23, European Conference on Fracture 2022, Procedia Structural Integrity T1 - Identification of the cause of incorrect work of bumper paint robot reducer UR - https://hdl.handle.net/21.15107/rcub_machinery_6015 ER -
@conference{ author = "Maneski, Taško and Milošević-Mitić, Vesna and Milović, Ljubica and Jovanović, Miloš and Anđelić, Nina and Petrović, Ana", year = "2022", abstract = "Industrial robots are used for high-precision tasks and in intensive production. One of the most reliable methods for monitoring robots’ work is vibrodiagnostics, which provides recommendations and maintenance procedures, and also serves as a reliable diagnostic method for determining the causes of industrial robot failures. Connection of robot and the supporting structure is very important and it affects on dynamic behavior of the robot. This paper presents the process of diagnosing dynamic condition of the structure with painting robots, after the failure of the robot motion reducer. To analyze the causes of the failure, a numerical analysis was performed, which included: static calculation, dynamic calculation, determining transfer function in frequency domain and reinforcement factors. Supporting structure has very low eigen-frequencies (3,5 to 9.5 Hz), it cannot accept inertial forces and large deformations and resonant behavior occur. Using FEM analysis is shown that the behavior of the structure is unfavorable because 20 eigen-oscillations had a frequency less than 17 Hz, and all are located in the robots’ working space. Determination of the transfer functions showed that the dynamic gain factor in all three directions of the excitation force is extremely large, while the corresponding frequencies are 5 ÷ 20 Hz. It was determined that the main problem was the rigidity of the supporting structure.", journal = "ECF23, European Conference on Fracture 2022, Procedia Structural Integrity", title = "Identification of the cause of incorrect work of bumper paint robot reducer", url = "https://hdl.handle.net/21.15107/rcub_machinery_6015" }
Maneski, T., Milošević-Mitić, V., Milović, L., Jovanović, M., Anđelić, N.,& Petrović, A.. (2022). Identification of the cause of incorrect work of bumper paint robot reducer. in ECF23, European Conference on Fracture 2022, Procedia Structural Integrity. https://hdl.handle.net/21.15107/rcub_machinery_6015
Maneski T, Milošević-Mitić V, Milović L, Jovanović M, Anđelić N, Petrović A. Identification of the cause of incorrect work of bumper paint robot reducer. in ECF23, European Conference on Fracture 2022, Procedia Structural Integrity. 2022;. https://hdl.handle.net/21.15107/rcub_machinery_6015 .
Maneski, Taško, Milošević-Mitić, Vesna, Milović, Ljubica, Jovanović, Miloš, Anđelić, Nina, Petrović, Ana, "Identification of the cause of incorrect work of bumper paint robot reducer" in ECF23, European Conference on Fracture 2022, Procedia Structural Integrity (2022), https://hdl.handle.net/21.15107/rcub_machinery_6015 .