Dynamic model of bucket wheel excavator substructures, validation of scaling laws
Апстракт
The possibilities of testing real systems are often limited, especially in case of large
constructions. One of the solutions is to create a sub-scaled model to predict elaborate the
behavior of the actual construction. In most cases, testing on the model instead of the actual
construction results in a great saving of requisite resources.
The laws of similitude and scaling are well-known and confirmed for cases of simple
structures. In principle, if a model is 10 times smaller (in dimensions and plate thicknesses)
than the real structure, its eigenvalue frequencies are expected to be 10 times larger than the
frequencies of the real structure. In this paper will be shown that laws of scaling can be
applied on dynamic testing of a complex structure.
As a test example, the construction of the substructure, the slewing platform and the lower
part of the pylons of the bucket wheel excavator Sch Rs 630 is considered. Note that, these are
dynamically loaded machines and dynamic calc...ulation is significant from the aspects of
identifying dynamic behavior. Secondly, strength of the supporting structure is of critical
importance for proper functioning of these machines. Dynamic calculation yields results in
identifying weak construction spots, because the dynamic behavior reveals how the
construction would react under some hypothetical load of arbitrary direction.
Numerical calculations of the real construction and sub-scaled model are performed using
Finite Element Method. Eigenvalue frequencies of the real construction and model are
obtained in correlation as expected. In this manner scaling laws are confirmed for this
structure and similar structures. Physical model of this construction is made (from the same
material as the real structure). Static experiments on physical model validated numerical
models (of the real structure and its sub-scaled model) and confirmed that 10 times reduction
of dimensions and thicknesses is justified. Thus, the physical model represents the real
structure and is suitable for further dynamic testing in the laboratory.
Кључне речи:
Finite Element Method / Eigenvalue frequenciesИзвор:
International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy, 2019Финансирање / пројекти:
- Развој савремених метода дијагностике и испитивања машинских структура (RS-MESTD-Technological Development (TD or TR)-35040)
- Интегритет опреме под притиском при истовременом деловању замарајућег оптерећења и температуре (RS-MESTD-Technological Development (TD or TR)-35011)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Trišović, Nataša AU - Petrović, Ana AU - Trišović, Zaga PY - 2019 UR - https://machinery.mas.bg.ac.rs/handle/123456789/6003 AB - The possibilities of testing real systems are often limited, especially in case of large constructions. One of the solutions is to create a sub-scaled model to predict elaborate the behavior of the actual construction. In most cases, testing on the model instead of the actual construction results in a great saving of requisite resources. The laws of similitude and scaling are well-known and confirmed for cases of simple structures. In principle, if a model is 10 times smaller (in dimensions and plate thicknesses) than the real structure, its eigenvalue frequencies are expected to be 10 times larger than the frequencies of the real structure. In this paper will be shown that laws of scaling can be applied on dynamic testing of a complex structure. As a test example, the construction of the substructure, the slewing platform and the lower part of the pylons of the bucket wheel excavator Sch Rs 630 is considered. Note that, these are dynamically loaded machines and dynamic calculation is significant from the aspects of identifying dynamic behavior. Secondly, strength of the supporting structure is of critical importance for proper functioning of these machines. Dynamic calculation yields results in identifying weak construction spots, because the dynamic behavior reveals how the construction would react under some hypothetical load of arbitrary direction. Numerical calculations of the real construction and sub-scaled model are performed using Finite Element Method. Eigenvalue frequencies of the real construction and model are obtained in correlation as expected. In this manner scaling laws are confirmed for this structure and similar structures. Physical model of this construction is made (from the same material as the real structure). Static experiments on physical model validated numerical models (of the real structure and its sub-scaled model) and confirmed that 10 times reduction of dimensions and thicknesses is justified. Thus, the physical model represents the real structure and is suitable for further dynamic testing in the laboratory. C3 - International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy T1 - Dynamic model of bucket wheel excavator substructures, validation of scaling laws UR - https://hdl.handle.net/21.15107/rcub_machinery_6003 ER -
@conference{ author = "Trišović, Nataša and Petrović, Ana and Trišović, Zaga", year = "2019", abstract = "The possibilities of testing real systems are often limited, especially in case of large constructions. One of the solutions is to create a sub-scaled model to predict elaborate the behavior of the actual construction. In most cases, testing on the model instead of the actual construction results in a great saving of requisite resources. The laws of similitude and scaling are well-known and confirmed for cases of simple structures. In principle, if a model is 10 times smaller (in dimensions and plate thicknesses) than the real structure, its eigenvalue frequencies are expected to be 10 times larger than the frequencies of the real structure. In this paper will be shown that laws of scaling can be applied on dynamic testing of a complex structure. As a test example, the construction of the substructure, the slewing platform and the lower part of the pylons of the bucket wheel excavator Sch Rs 630 is considered. Note that, these are dynamically loaded machines and dynamic calculation is significant from the aspects of identifying dynamic behavior. Secondly, strength of the supporting structure is of critical importance for proper functioning of these machines. Dynamic calculation yields results in identifying weak construction spots, because the dynamic behavior reveals how the construction would react under some hypothetical load of arbitrary direction. Numerical calculations of the real construction and sub-scaled model are performed using Finite Element Method. Eigenvalue frequencies of the real construction and model are obtained in correlation as expected. In this manner scaling laws are confirmed for this structure and similar structures. Physical model of this construction is made (from the same material as the real structure). Static experiments on physical model validated numerical models (of the real structure and its sub-scaled model) and confirmed that 10 times reduction of dimensions and thicknesses is justified. Thus, the physical model represents the real structure and is suitable for further dynamic testing in the laboratory.", journal = "International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy", title = "Dynamic model of bucket wheel excavator substructures, validation of scaling laws", url = "https://hdl.handle.net/21.15107/rcub_machinery_6003" }
Trišović, N., Petrović, A.,& Trišović, Z.. (2019). Dynamic model of bucket wheel excavator substructures, validation of scaling laws. in International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy. https://hdl.handle.net/21.15107/rcub_machinery_6003
Trišović N, Petrović A, Trišović Z. Dynamic model of bucket wheel excavator substructures, validation of scaling laws. in International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy. 2019;. https://hdl.handle.net/21.15107/rcub_machinery_6003 .
Trišović, Nataša, Petrović, Ana, Trišović, Zaga, "Dynamic model of bucket wheel excavator substructures, validation of scaling laws" in International Conference on Nonlinear Solid Mechanics-ICoNSoM2019, Abstract Book, Roma, Italy (2019), https://hdl.handle.net/21.15107/rcub_machinery_6003 .