Development and analysis of static strength of the pinafore flaps on the low-floor tram on avenio platform
2022
Конференцијски прилог (Објављена верзија)
,
University of Niš, Faculty of Mechanical Engineering
Метаподаци
Приказ свих података о документуАпстракт
The aim of the master thesis is weight optimization of the existing construction of the pinafore flaps and production cost reduction as much as possible. This was done by designing a new construction solution and applying of new material, and thus a new way of producing pinafore flaps that are implemented in the construction of low-floor trams of the "Avenio" platform. The "Avenio" platform is a tram model developed by Siemens mobility and it is in use all over the world, so depending on the needs of the customer can be offered different designs. The pinafore flaps are covering the running and the motor bogies, and it is a part of the vehicle body. The existing construction is based on aluminum, while for a new one is used GFRP. The 3D design of the new construction was performed by using CREO Parametric software package. The static strength analyses via the finite element method (FEA) of the existing and new construction were analyzed by using the ANSYS software package. Based on the ...previous it can be concluded that the new design with a lower mass can withstand normal exploitation load without permanent deformation.
Кључне речи:
Trams / Pinafore flaps / Bogies / Static strengthИзвор:
XX Scientific-Expert Conference on Railways - RAILCON '22, Proceedings, 2022, 189-189Издавач:
- University of Niš, Faculty of Mechanical Engineering
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Filipović, Ana AU - Tanasković, Jovan PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5936 AB - The aim of the master thesis is weight optimization of the existing construction of the pinafore flaps and production cost reduction as much as possible. This was done by designing a new construction solution and applying of new material, and thus a new way of producing pinafore flaps that are implemented in the construction of low-floor trams of the "Avenio" platform. The "Avenio" platform is a tram model developed by Siemens mobility and it is in use all over the world, so depending on the needs of the customer can be offered different designs. The pinafore flaps are covering the running and the motor bogies, and it is a part of the vehicle body. The existing construction is based on aluminum, while for a new one is used GFRP. The 3D design of the new construction was performed by using CREO Parametric software package. The static strength analyses via the finite element method (FEA) of the existing and new construction were analyzed by using the ANSYS software package. Based on the previous it can be concluded that the new design with a lower mass can withstand normal exploitation load without permanent deformation. PB - University of Niš, Faculty of Mechanical Engineering C3 - XX Scientific-Expert Conference on Railways - RAILCON '22, Proceedings T1 - Development and analysis of static strength of the pinafore flaps on the low-floor tram on avenio platform EP - 189 SP - 189 UR - https://hdl.handle.net/21.15107/rcub_machinery_5936 ER -
@conference{ author = "Filipović, Ana and Tanasković, Jovan", year = "2022", abstract = "The aim of the master thesis is weight optimization of the existing construction of the pinafore flaps and production cost reduction as much as possible. This was done by designing a new construction solution and applying of new material, and thus a new way of producing pinafore flaps that are implemented in the construction of low-floor trams of the "Avenio" platform. The "Avenio" platform is a tram model developed by Siemens mobility and it is in use all over the world, so depending on the needs of the customer can be offered different designs. The pinafore flaps are covering the running and the motor bogies, and it is a part of the vehicle body. The existing construction is based on aluminum, while for a new one is used GFRP. The 3D design of the new construction was performed by using CREO Parametric software package. The static strength analyses via the finite element method (FEA) of the existing and new construction were analyzed by using the ANSYS software package. Based on the previous it can be concluded that the new design with a lower mass can withstand normal exploitation load without permanent deformation.", publisher = "University of Niš, Faculty of Mechanical Engineering", journal = "XX Scientific-Expert Conference on Railways - RAILCON '22, Proceedings", title = "Development and analysis of static strength of the pinafore flaps on the low-floor tram on avenio platform", pages = "189-189", url = "https://hdl.handle.net/21.15107/rcub_machinery_5936" }
Filipović, A.,& Tanasković, J.. (2022). Development and analysis of static strength of the pinafore flaps on the low-floor tram on avenio platform. in XX Scientific-Expert Conference on Railways - RAILCON '22, Proceedings University of Niš, Faculty of Mechanical Engineering., 189-189. https://hdl.handle.net/21.15107/rcub_machinery_5936
Filipović A, Tanasković J. Development and analysis of static strength of the pinafore flaps on the low-floor tram on avenio platform. in XX Scientific-Expert Conference on Railways - RAILCON '22, Proceedings. 2022;:189-189. https://hdl.handle.net/21.15107/rcub_machinery_5936 .
Filipović, Ana, Tanasković, Jovan, "Development and analysis of static strength of the pinafore flaps on the low-floor tram on avenio platform" in XX Scientific-Expert Conference on Railways - RAILCON '22, Proceedings (2022):189-189, https://hdl.handle.net/21.15107/rcub_machinery_5936 .