Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material
2022
Аутори
Trajković, IsaakJoksimović, Aleksandra
Ilić, Uroš
Djurović, Marko
Lukić, Tijana
Lazarević, Jovana
Milošević, Miloš
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper the influence of sample infill on the flexural strength will be presented. Plate and
pipe-shaped specimens were tested by three-point bending according to the ISO 178:2019
standard. Samples were produced using ABS material with the inclusion of an unknown filler
designated as X. The infill during the production of samples was 50% and 100%, while all
other parameters such as printing temperature, bed temperature, nozzle width, printing
speed and layer height, were the same for both types of samples. Samples were printed
vertically, which does not actually refer to the mechanical properties of the material itself, but
to the influence of the amount of infill on the strength of the bond between the layers. The
tests were performed on a Shimadzu AGS-Ks 100kN universal machine. Test results indicate a
significant influence of the infill on the bond strength between the layers and thus on the
flexural strength of the samples. Further research will be carried out to me...asure the influence
of samples treatment with acetone on their flexural strength.
Извор:
3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022, 2022Издавач:
- Faculty of Mechanical Engineering (FME), Univ. of Belgrad
Финансирање / пројекти:
- SIRAMM - Eastern European twinning on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing (EU-H2020-857124)
Колекције
Институција/група
Inovacioni centarTY - CONF AU - Trajković, Isaak AU - Joksimović, Aleksandra AU - Ilić, Uroš AU - Djurović, Marko AU - Lukić, Tijana AU - Lazarević, Jovana AU - Milošević, Miloš PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5928 AB - In this paper the influence of sample infill on the flexural strength will be presented. Plate and pipe-shaped specimens were tested by three-point bending according to the ISO 178:2019 standard. Samples were produced using ABS material with the inclusion of an unknown filler designated as X. The infill during the production of samples was 50% and 100%, while all other parameters such as printing temperature, bed temperature, nozzle width, printing speed and layer height, were the same for both types of samples. Samples were printed vertically, which does not actually refer to the mechanical properties of the material itself, but to the influence of the amount of infill on the strength of the bond between the layers. The tests were performed on a Shimadzu AGS-Ks 100kN universal machine. Test results indicate a significant influence of the infill on the bond strength between the layers and thus on the flexural strength of the samples. Further research will be carried out to measure the influence of samples treatment with acetone on their flexural strength. PB - Faculty of Mechanical Engineering (FME), Univ. of Belgrad C3 - 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022 T1 - Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material UR - https://hdl.handle.net/21.15107/rcub_machinery_5928 ER -
@conference{ author = "Trajković, Isaak and Joksimović, Aleksandra and Ilić, Uroš and Djurović, Marko and Lukić, Tijana and Lazarević, Jovana and Milošević, Miloš", year = "2022", abstract = "In this paper the influence of sample infill on the flexural strength will be presented. Plate and pipe-shaped specimens were tested by three-point bending according to the ISO 178:2019 standard. Samples were produced using ABS material with the inclusion of an unknown filler designated as X. The infill during the production of samples was 50% and 100%, while all other parameters such as printing temperature, bed temperature, nozzle width, printing speed and layer height, were the same for both types of samples. Samples were printed vertically, which does not actually refer to the mechanical properties of the material itself, but to the influence of the amount of infill on the strength of the bond between the layers. The tests were performed on a Shimadzu AGS-Ks 100kN universal machine. Test results indicate a significant influence of the infill on the bond strength between the layers and thus on the flexural strength of the samples. Further research will be carried out to measure the influence of samples treatment with acetone on their flexural strength.", publisher = "Faculty of Mechanical Engineering (FME), Univ. of Belgrad", journal = "3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022", title = "Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material", url = "https://hdl.handle.net/21.15107/rcub_machinery_5928" }
Trajković, I., Joksimović, A., Ilić, U., Djurović, M., Lukić, T., Lazarević, J.,& Milošević, M.. (2022). Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material. in 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022 Faculty of Mechanical Engineering (FME), Univ. of Belgrad.. https://hdl.handle.net/21.15107/rcub_machinery_5928
Trajković I, Joksimović A, Ilić U, Djurović M, Lukić T, Lazarević J, Milošević M. Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material. in 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022. 2022;. https://hdl.handle.net/21.15107/rcub_machinery_5928 .
Trajković, Isaak, Joksimović, Aleksandra, Ilić, Uroš, Djurović, Marko, Lukić, Tijana, Lazarević, Jovana, Milošević, Miloš, "Experimental determination of flexural strength on cylindrical and plate samples produced by additive manufacturing from ABSX material" in 3rd International Workshop on Reliability and Design of Additively Manufactured Materials – RdAMM2 Belgrade, Serbia, 4th –6th October 2022 (2022), https://hdl.handle.net/21.15107/rcub_machinery_5928 .