Thermal treatment as a one solution for sustainable waste management
Апстракт
Implementation of EU regulations during the construction of new and maintenance of existing waste dumps, coupled with difficulties associated with the expansion of existing disposal sites and selection of new disposal locations, impose the need for different waste treatment technologies to be used and applied as one of the measures in complex waste management chain. Solid waste management comprises integrated systems for the management of wastes, including waste reduction, collection, transport, recycling, energy recovery, treatment, and disposal in the most economical way consistent with the protection of public health and the natural environment. Waste-to-energy plants, based on their technical features, are very similar to thermal power and district-heated plants. Now, the number of thermal waste treatment facilities is growing having in mind that thermal treatment is officially recognized as one of the efficient climate change mitigation measures. It goes without saying that only m...odern, highly efficient facilities are qualified to be considered proper global CO2 emission reduction technology. However, waste is today rarely incinerated without appropriate pre‐treatment, where particular attention is given to solid recovery fuels – SRF. These fuels represent a dry fraction of municipal and industrial solid
waste, with commonly added synthetic materials and removal of any form of chlorine. Production and quality of SRF are fully defined by related technical standards. The use of SRF is highly important in cement and energy generation industries, where SRFs are used as additional fuels. The following are some representative examples:
• TPP RWE Gerstein (brown and bituminous coal-fired plant), 220 kt/a
• TPP Vattenfall Jänschwalde (lignite-fired plant), 400 kt/a
• TPP RWE Berrenrath (lignite-fired plant) 70 kt/a
• Large number of cement kilns in Germany, 900 ‐ 1200 kt/a per kiln
• CHP plant, Neumünster, 150 kt/a.
In developed countries, cement and lime furnaces are commonly used for the co‐combustion of waste or are fully reconstructed to be used for hazardous waste treatment.
A large number of thermal treatment facilities built to date and quite a considerable number of those are planned to be constructed in the near future, as well as positive experiences related to the use of certain waste types in cement plants indicate that considered waste removal technology is financially and environmentally acceptable. It is therefore concluded that thermal treatment facilities and their possible implementation in urban areas should be given more attention. However, the following should be kept in mind:
• It is necessary to facilitate the development and proper regulation of the national waste market in a manner that will encourage legal flows of waste and prevent illegal waste trade and traffic;
• Heaving in mind the absence of clearly defined procedures that would address and regulate waste utilization, treatment, and end‐of‐waste issues, it is necessary to make the best efforts to further develop related national legislation;
• It is necessary to improve awareness and participation of the broader population in all phases of waste management decision-making processes, primarily through greater engagement of professional organizations (ISWA, national WM associations, engineering chambers, standardization offices, and similar), academia, the non‐governmental sector, etc.
Кључне речи:
municipal waste / industrial waste / thermal treatment / SRFИзвор:
Book of abstracts International Workshop Sustainable Materials and Technologies, 2015, 2015, 6-7Издавач:
- University of Maribor Faculty of Mechanical Engineering, Institute for Engineering Materials and Design, Laboratory for Characterization and Processing of Polymers
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Jovović, Aleksandar AU - Todorović, Dušan PY - 2015 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5666 AB - Implementation of EU regulations during the construction of new and maintenance of existing waste dumps, coupled with difficulties associated with the expansion of existing disposal sites and selection of new disposal locations, impose the need for different waste treatment technologies to be used and applied as one of the measures in complex waste management chain. Solid waste management comprises integrated systems for the management of wastes, including waste reduction, collection, transport, recycling, energy recovery, treatment, and disposal in the most economical way consistent with the protection of public health and the natural environment. Waste-to-energy plants, based on their technical features, are very similar to thermal power and district-heated plants. Now, the number of thermal waste treatment facilities is growing having in mind that thermal treatment is officially recognized as one of the efficient climate change mitigation measures. It goes without saying that only modern, highly efficient facilities are qualified to be considered proper global CO2 emission reduction technology. However, waste is today rarely incinerated without appropriate pre‐treatment, where particular attention is given to solid recovery fuels – SRF. These fuels represent a dry fraction of municipal and industrial solid waste, with commonly added synthetic materials and removal of any form of chlorine. Production and quality of SRF are fully defined by related technical standards. The use of SRF is highly important in cement and energy generation industries, where SRFs are used as additional fuels. The following are some representative examples: • TPP RWE Gerstein (brown and bituminous coal-fired plant), 220 kt/a • TPP Vattenfall Jänschwalde (lignite-fired plant), 400 kt/a • TPP RWE Berrenrath (lignite-fired plant) 70 kt/a • Large number of cement kilns in Germany, 900 ‐ 1200 kt/a per kiln • CHP plant, Neumünster, 150 kt/a. In developed countries, cement and lime furnaces are commonly used for the co‐combustion of waste or are fully reconstructed to be used for hazardous waste treatment. A large number of thermal treatment facilities built to date and quite a considerable number of those are planned to be constructed in the near future, as well as positive experiences related to the use of certain waste types in cement plants indicate that considered waste removal technology is financially and environmentally acceptable. It is therefore concluded that thermal treatment facilities and their possible implementation in urban areas should be given more attention. However, the following should be kept in mind: • It is necessary to facilitate the development and proper regulation of the national waste market in a manner that will encourage legal flows of waste and prevent illegal waste trade and traffic; • Heaving in mind the absence of clearly defined procedures that would address and regulate waste utilization, treatment, and end‐of‐waste issues, it is necessary to make the best efforts to further develop related national legislation; • It is necessary to improve awareness and participation of the broader population in all phases of waste management decision-making processes, primarily through greater engagement of professional organizations (ISWA, national WM associations, engineering chambers, standardization offices, and similar), academia, the non‐governmental sector, etc. PB - University of Maribor Faculty of Mechanical Engineering, Institute for Engineering Materials and Design, Laboratory for Characterization and Processing of Polymers C3 - Book of abstracts International Workshop Sustainable Materials and Technologies, 2015 T1 - Thermal treatment as a one solution for sustainable waste management EP - 7 SP - 6 UR - https://hdl.handle.net/21.15107/rcub_machinery_5666 ER -
@conference{ author = "Jovović, Aleksandar and Todorović, Dušan", year = "2015", abstract = "Implementation of EU regulations during the construction of new and maintenance of existing waste dumps, coupled with difficulties associated with the expansion of existing disposal sites and selection of new disposal locations, impose the need for different waste treatment technologies to be used and applied as one of the measures in complex waste management chain. Solid waste management comprises integrated systems for the management of wastes, including waste reduction, collection, transport, recycling, energy recovery, treatment, and disposal in the most economical way consistent with the protection of public health and the natural environment. Waste-to-energy plants, based on their technical features, are very similar to thermal power and district-heated plants. Now, the number of thermal waste treatment facilities is growing having in mind that thermal treatment is officially recognized as one of the efficient climate change mitigation measures. It goes without saying that only modern, highly efficient facilities are qualified to be considered proper global CO2 emission reduction technology. However, waste is today rarely incinerated without appropriate pre‐treatment, where particular attention is given to solid recovery fuels – SRF. These fuels represent a dry fraction of municipal and industrial solid waste, with commonly added synthetic materials and removal of any form of chlorine. Production and quality of SRF are fully defined by related technical standards. The use of SRF is highly important in cement and energy generation industries, where SRFs are used as additional fuels. The following are some representative examples: • TPP RWE Gerstein (brown and bituminous coal-fired plant), 220 kt/a • TPP Vattenfall Jänschwalde (lignite-fired plant), 400 kt/a • TPP RWE Berrenrath (lignite-fired plant) 70 kt/a • Large number of cement kilns in Germany, 900 ‐ 1200 kt/a per kiln • CHP plant, Neumünster, 150 kt/a. In developed countries, cement and lime furnaces are commonly used for the co‐combustion of waste or are fully reconstructed to be used for hazardous waste treatment. A large number of thermal treatment facilities built to date and quite a considerable number of those are planned to be constructed in the near future, as well as positive experiences related to the use of certain waste types in cement plants indicate that considered waste removal technology is financially and environmentally acceptable. It is therefore concluded that thermal treatment facilities and their possible implementation in urban areas should be given more attention. However, the following should be kept in mind: • It is necessary to facilitate the development and proper regulation of the national waste market in a manner that will encourage legal flows of waste and prevent illegal waste trade and traffic; • Heaving in mind the absence of clearly defined procedures that would address and regulate waste utilization, treatment, and end‐of‐waste issues, it is necessary to make the best efforts to further develop related national legislation; • It is necessary to improve awareness and participation of the broader population in all phases of waste management decision-making processes, primarily through greater engagement of professional organizations (ISWA, national WM associations, engineering chambers, standardization offices, and similar), academia, the non‐governmental sector, etc.", publisher = "University of Maribor Faculty of Mechanical Engineering, Institute for Engineering Materials and Design, Laboratory for Characterization and Processing of Polymers", journal = "Book of abstracts International Workshop Sustainable Materials and Technologies, 2015", title = "Thermal treatment as a one solution for sustainable waste management", pages = "7-6", url = "https://hdl.handle.net/21.15107/rcub_machinery_5666" }
Jovović, A.,& Todorović, D.. (2015). Thermal treatment as a one solution for sustainable waste management. in Book of abstracts International Workshop Sustainable Materials and Technologies, 2015 University of Maribor Faculty of Mechanical Engineering, Institute for Engineering Materials and Design, Laboratory for Characterization and Processing of Polymers., 6-7. https://hdl.handle.net/21.15107/rcub_machinery_5666
Jovović A, Todorović D. Thermal treatment as a one solution for sustainable waste management. in Book of abstracts International Workshop Sustainable Materials and Technologies, 2015. 2015;:6-7. https://hdl.handle.net/21.15107/rcub_machinery_5666 .
Jovović, Aleksandar, Todorović, Dušan, "Thermal treatment as a one solution for sustainable waste management" in Book of abstracts International Workshop Sustainable Materials and Technologies, 2015 (2015):6-7, https://hdl.handle.net/21.15107/rcub_machinery_5666 .