Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles
Апстракт
MMCs as new and promising materials are under constant development and their application in different industries is increasing. They have better mechanical and tribological properties comparing to the matrix materials. This paper presents tribological tests results of Al-Si alloy A356 (EN-Al Si7Mg0.3), with and without 3 wt. % Al2O3 reinforcement. The reinforcement was in the shape of particles with 12 μm in diameter and the technology for producing of composite was compo casting. The pin-on disc tribometer was used to carry out these tests under dry sliding conditions at different loads. Worn surfaces and wear debris were also observed and analyzed with scanning electron microscopy (SEM). .
Кључне речи:
wear / friction / dry sliding / aluminum matrix composites (AMCs)Извор:
Tribology in Industry, 2006, 28, 1-2, 27-31Издавач:
- Fakultet inženjerskih nauka, Kragujevac
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Vencl, Aleksandar AU - Rac, Aleksandar AU - Bobić, Ilija AU - Mišković, Zoran PY - 2006 UR - https://machinery.mas.bg.ac.rs/handle/123456789/563 AB - MMCs as new and promising materials are under constant development and their application in different industries is increasing. They have better mechanical and tribological properties comparing to the matrix materials. This paper presents tribological tests results of Al-Si alloy A356 (EN-Al Si7Mg0.3), with and without 3 wt. % Al2O3 reinforcement. The reinforcement was in the shape of particles with 12 μm in diameter and the technology for producing of composite was compo casting. The pin-on disc tribometer was used to carry out these tests under dry sliding conditions at different loads. Worn surfaces and wear debris were also observed and analyzed with scanning electron microscopy (SEM). . PB - Fakultet inženjerskih nauka, Kragujevac T2 - Tribology in Industry T1 - Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles EP - 31 IS - 1-2 SP - 27 VL - 28 UR - https://hdl.handle.net/21.15107/rcub_machinery_563 ER -
@article{ author = "Vencl, Aleksandar and Rac, Aleksandar and Bobić, Ilija and Mišković, Zoran", year = "2006", abstract = "MMCs as new and promising materials are under constant development and their application in different industries is increasing. They have better mechanical and tribological properties comparing to the matrix materials. This paper presents tribological tests results of Al-Si alloy A356 (EN-Al Si7Mg0.3), with and without 3 wt. % Al2O3 reinforcement. The reinforcement was in the shape of particles with 12 μm in diameter and the technology for producing of composite was compo casting. The pin-on disc tribometer was used to carry out these tests under dry sliding conditions at different loads. Worn surfaces and wear debris were also observed and analyzed with scanning electron microscopy (SEM). .", publisher = "Fakultet inženjerskih nauka, Kragujevac", journal = "Tribology in Industry", title = "Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles", pages = "31-27", number = "1-2", volume = "28", url = "https://hdl.handle.net/21.15107/rcub_machinery_563" }
Vencl, A., Rac, A., Bobić, I.,& Mišković, Z.. (2006). Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles. in Tribology in Industry Fakultet inženjerskih nauka, Kragujevac., 28(1-2), 27-31. https://hdl.handle.net/21.15107/rcub_machinery_563
Vencl A, Rac A, Bobić I, Mišković Z. Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles. in Tribology in Industry. 2006;28(1-2):27-31. https://hdl.handle.net/21.15107/rcub_machinery_563 .
Vencl, Aleksandar, Rac, Aleksandar, Bobić, Ilija, Mišković, Zoran, "Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles" in Tribology in Industry, 28, no. 1-2 (2006):27-31, https://hdl.handle.net/21.15107/rcub_machinery_563 .