Filler Material Choice For Stop Valve Repair Welding
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Filler material choice for repair welding of stop valve spindle of thermal power plant by-pass pipeline was presented in this paper. Repair welding of the stop valve spindle was necessary because of plant operating problems due to very frequent localized damage appearance in the form of erosive wear on it. For this purpose it was necessary to choice appropriate filler material with high wear resistance characteristic. Experimental investigation and testing (hardness measurement, chemical composition analysis and microstructural investigation) of prepared specimens after welding simulation with different kind of filler material was performed. On the basis of obtained results it was recommended procedure for application of the filler material with generally preferable characteristic.
Кључне речи:
Repair welding / Weld defect / Stellite / Microstructure / ValveИзвор:
Conference: IIW International Congress “Welding and Joining Technologies for a Sustainable Development and Environment”, The 1st South-East European Welding Congress, 2006Издавач:
- The National R&D Institute for Welding and Material Testing - ISIM Timişoara
URI
https://www.researchgate.net/publication/258519270_Filler_Material_Choice_for_Stop_Valve_Repair_Welding#fullTextFileContenthttps://machinery.mas.bg.ac.rs/handle/123456789/5545
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Šijački Žeravčić, Vera AU - Bakić, Gordana AU - Đukić, Miloš AU - Anđelić, Biljana AU - Rajičić, Bratislav PY - 2006 UR - https://www.researchgate.net/publication/258519270_Filler_Material_Choice_for_Stop_Valve_Repair_Welding#fullTextFileContent UR - https://machinery.mas.bg.ac.rs/handle/123456789/5545 AB - Filler material choice for repair welding of stop valve spindle of thermal power plant by-pass pipeline was presented in this paper. Repair welding of the stop valve spindle was necessary because of plant operating problems due to very frequent localized damage appearance in the form of erosive wear on it. For this purpose it was necessary to choice appropriate filler material with high wear resistance characteristic. Experimental investigation and testing (hardness measurement, chemical composition analysis and microstructural investigation) of prepared specimens after welding simulation with different kind of filler material was performed. On the basis of obtained results it was recommended procedure for application of the filler material with generally preferable characteristic. PB - The National R&D Institute for Welding and Material Testing - ISIM Timişoara C3 - Conference: IIW International Congress “Welding and Joining Technologies for a Sustainable Development and Environment”, The 1st South-East European Welding Congress T1 - Filler Material Choice For Stop Valve Repair Welding UR - https://hdl.handle.net/21.15107/rcub_machinery_5545 ER -
@conference{ author = "Šijački Žeravčić, Vera and Bakić, Gordana and Đukić, Miloš and Anđelić, Biljana and Rajičić, Bratislav", year = "2006", abstract = "Filler material choice for repair welding of stop valve spindle of thermal power plant by-pass pipeline was presented in this paper. Repair welding of the stop valve spindle was necessary because of plant operating problems due to very frequent localized damage appearance in the form of erosive wear on it. For this purpose it was necessary to choice appropriate filler material with high wear resistance characteristic. Experimental investigation and testing (hardness measurement, chemical composition analysis and microstructural investigation) of prepared specimens after welding simulation with different kind of filler material was performed. On the basis of obtained results it was recommended procedure for application of the filler material with generally preferable characteristic.", publisher = "The National R&D Institute for Welding and Material Testing - ISIM Timişoara", journal = "Conference: IIW International Congress “Welding and Joining Technologies for a Sustainable Development and Environment”, The 1st South-East European Welding Congress", title = "Filler Material Choice For Stop Valve Repair Welding", url = "https://hdl.handle.net/21.15107/rcub_machinery_5545" }
Šijački Žeravčić, V., Bakić, G., Đukić, M., Anđelić, B.,& Rajičić, B.. (2006). Filler Material Choice For Stop Valve Repair Welding. in Conference: IIW International Congress “Welding and Joining Technologies for a Sustainable Development and Environment”, The 1st South-East European Welding Congress The National R&D Institute for Welding and Material Testing - ISIM Timişoara.. https://hdl.handle.net/21.15107/rcub_machinery_5545
Šijački Žeravčić V, Bakić G, Đukić M, Anđelić B, Rajičić B. Filler Material Choice For Stop Valve Repair Welding. in Conference: IIW International Congress “Welding and Joining Technologies for a Sustainable Development and Environment”, The 1st South-East European Welding Congress. 2006;. https://hdl.handle.net/21.15107/rcub_machinery_5545 .
Šijački Žeravčić, Vera, Bakić, Gordana, Đukić, Miloš, Anđelić, Biljana, Rajičić, Bratislav, "Filler Material Choice For Stop Valve Repair Welding" in Conference: IIW International Congress “Welding and Joining Technologies for a Sustainable Development and Environment”, The 1st South-East European Welding Congress (2006), https://hdl.handle.net/21.15107/rcub_machinery_5545 .