Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force
Abstract
The use of threaded inserts embedded in plastic parts is very common in variety of industries including electronics, automotive, aerospace, medical, transportation, defense etc., particularly where frequent assembly and disassembly are required. Performed technique of placement the inserts in specimens is heat staking - pressing the heated insert into the mounting hole to melt the material surrounding the insert. Specimens were made of PLA and obtained using a commercial Creality Ender-6 3D printer. The square-shaped samples have dimensions of 20 x 20 x 4 [mm] with a 4.6 [mm] diameter central hole for placing brass inserts with M3 thread.
Keywords:
Brass insert / axial force / stress concentration / crack / wall layerSource:
Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic, 2022Publisher:
- SIRAMM H2020-WIDESPREAD-2018-03 Project No. 857124, Horizon 2020
Collections
Institution/Community
Mašinski fakultetTY - CONF AU - Ivanović, Milica AU - Vorkapić, Miloš AU - Simonović, Aleksandar AU - Ivanov, Toni AU - Stamenković, Igor PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5420 AB - The use of threaded inserts embedded in plastic parts is very common in variety of industries including electronics, automotive, aerospace, medical, transportation, defense etc., particularly where frequent assembly and disassembly are required. Performed technique of placement the inserts in specimens is heat staking - pressing the heated insert into the mounting hole to melt the material surrounding the insert. Specimens were made of PLA and obtained using a commercial Creality Ender-6 3D printer. The square-shaped samples have dimensions of 20 x 20 x 4 [mm] with a 4.6 [mm] diameter central hole for placing brass inserts with M3 thread. PB - SIRAMM H2020-WIDESPREAD-2018-03 Project No. 857124, Horizon 2020 C3 - Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic T1 - Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force UR - https://hdl.handle.net/21.15107/rcub_machinery_5420 ER -
@conference{ author = "Ivanović, Milica and Vorkapić, Miloš and Simonović, Aleksandar and Ivanov, Toni and Stamenković, Igor", year = "2022", abstract = "The use of threaded inserts embedded in plastic parts is very common in variety of industries including electronics, automotive, aerospace, medical, transportation, defense etc., particularly where frequent assembly and disassembly are required. Performed technique of placement the inserts in specimens is heat staking - pressing the heated insert into the mounting hole to melt the material surrounding the insert. Specimens were made of PLA and obtained using a commercial Creality Ender-6 3D printer. The square-shaped samples have dimensions of 20 x 20 x 4 [mm] with a 4.6 [mm] diameter central hole for placing brass inserts with M3 thread.", publisher = "SIRAMM H2020-WIDESPREAD-2018-03 Project No. 857124, Horizon 2020", journal = "Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic", title = "Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force", url = "https://hdl.handle.net/21.15107/rcub_machinery_5420" }
Ivanović, M., Vorkapić, M., Simonović, A., Ivanov, T.,& Stamenković, I.. (2022). Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force. in Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic SIRAMM H2020-WIDESPREAD-2018-03 Project No. 857124, Horizon 2020.. https://hdl.handle.net/21.15107/rcub_machinery_5420
Ivanović M, Vorkapić M, Simonović A, Ivanov T, Stamenković I. Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force. in Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic. 2022;. https://hdl.handle.net/21.15107/rcub_machinery_5420 .
Ivanović, Milica, Vorkapić, Miloš, Simonović, Aleksandar, Ivanov, Toni, Stamenković, Igor, "Influence of wall layer number around brass inserts in 3D printed specimens subjected to axial pull-out force" in Workshop Programme and the Book of Abstracts - 2nd International Workshop on Structural Integrity of Additively Manufactured Materials – SIAMM22, 4th - 5th February 2022, Brno, Czech Republic (2022), https://hdl.handle.net/21.15107/rcub_machinery_5420 .