Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter
Апстракт
This paper investigates the implementation of additive manufacturing (AM) in circular production (CP) through the 6R strategy. The methodology allows designers to reconsider their decisions, correct mistakes or make specific changes to the model in all phases of the design process, from initial drawings to the finished product. CP enables the complete realisation of the model/prototype with a particular focus on environmental protection and the additional use of recycled waste. The proposed algorithm is tested through the design and manufacturing of an enclosure of an industrial temperature transmitter. Some of the weaknesses of additive manufacturing, such as mechanically damaged surfaces, surface roughness, and tearing of models on weak joints, have been investigated, and recommendations for mitigation are given.
The mechanical product finishing methods are described in detail in the paper as well, and in order to check the prototype functionality, some tensile, thermal stress and... drop tests were performed, and the results were analysed and discussed. It was shown that significant savings in time, cost and material can be achieved by implementing AM in realising a fully functional prototype while simultaneously in line with the demands for CP and 6R.
Кључне речи:
Circular production / 6R strategy / Additive manufacturing / FDM printing / Algorithm / Sustainable development / Product design / EnclosureИзвор:
Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems, 2022, 564Издавач:
- Springer
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CHAP AU - Vorkapić, Miloš AU - Ivanov, Toni PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5418 AB - This paper investigates the implementation of additive manufacturing (AM) in circular production (CP) through the 6R strategy. The methodology allows designers to reconsider their decisions, correct mistakes or make specific changes to the model in all phases of the design process, from initial drawings to the finished product. CP enables the complete realisation of the model/prototype with a particular focus on environmental protection and the additional use of recycled waste. The proposed algorithm is tested through the design and manufacturing of an enclosure of an industrial temperature transmitter. Some of the weaknesses of additive manufacturing, such as mechanically damaged surfaces, surface roughness, and tearing of models on weak joints, have been investigated, and recommendations for mitigation are given. The mechanical product finishing methods are described in detail in the paper as well, and in order to check the prototype functionality, some tensile, thermal stress and drop tests were performed, and the results were analysed and discussed. It was shown that significant savings in time, cost and material can be achieved by implementing AM in realising a fully functional prototype while simultaneously in line with the demands for CP and 6R. PB - Springer T2 - Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems T1 - Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter VL - 564 DO - 10.1007/978-3-031-19499-3_3 ER -
@inbook{ author = "Vorkapić, Miloš and Ivanov, Toni", year = "2022", abstract = "This paper investigates the implementation of additive manufacturing (AM) in circular production (CP) through the 6R strategy. The methodology allows designers to reconsider their decisions, correct mistakes or make specific changes to the model in all phases of the design process, from initial drawings to the finished product. CP enables the complete realisation of the model/prototype with a particular focus on environmental protection and the additional use of recycled waste. The proposed algorithm is tested through the design and manufacturing of an enclosure of an industrial temperature transmitter. Some of the weaknesses of additive manufacturing, such as mechanically damaged surfaces, surface roughness, and tearing of models on weak joints, have been investigated, and recommendations for mitigation are given. The mechanical product finishing methods are described in detail in the paper as well, and in order to check the prototype functionality, some tensile, thermal stress and drop tests were performed, and the results were analysed and discussed. It was shown that significant savings in time, cost and material can be achieved by implementing AM in realising a fully functional prototype while simultaneously in line with the demands for CP and 6R.", publisher = "Springer", journal = "Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems", booktitle = "Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter", volume = "564", doi = "10.1007/978-3-031-19499-3_3" }
Vorkapić, M.,& Ivanov, T.. (2022). Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter. in Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems Springer., 564. https://doi.org/10.1007/978-3-031-19499-3_3
Vorkapić M, Ivanov T. Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter. in Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems. 2022;564. doi:10.1007/978-3-031-19499-3_3 .
Vorkapić, Miloš, Ivanov, Toni, "Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case - Enclosure for Industrial Temperature Transmitter" in Experimental Research and Numerical Simulation in Applied Sciences. Proceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2022. Lecture Notes in Networks and Systems, 564 (2022), https://doi.org/10.1007/978-3-031-19499-3_3 . .