Applicability of rapid tooling in injection molding application
Апстракт
In the field of mass production, injection molding accounts for a large percentage of the technologies used in the applied technologies. One of the main disadvantages when it comes to injection molding is the cost of tools. This can greatly affect the price of the finished product if there are multiple iterations of product development through various prototypes. For initial tools used in running production or in product design, it is necessary not only to be as cheap as possible, but also to make their production time as short as possible. The increasing application of additive technologies in the field of rapid tooling, gives a wide space in the possibility of lowering the price of the final product. The applicability of additive technologies in injection molding has not been sufficiently researched, although the possibility of application is huge. In this paper, the main emphasis is on the applicability of additive technologies in injection molding of an initial series or a smaller ...series of the parts. The conclusion is that not only additive technologies can be applied in the production of core and cavity or complex parts of injection molding tools, but the minimum time that is required to produce the tool is significantly reduced, which directly affects the price of the final product.
Кључне речи:
Rapid Tooling / Additive Technologies / Injection Molding / ToolsИзвор:
International Conference of Experimental and Numerical Investigations and New Technologies "CNN TECH 2021" - Book of Abstracts, 2021, 10-10Издавач:
- University of Belgrade, faculty of Mechanical Engineering
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Pjević, Miloš AU - Popović, Mihajlo AU - Mladenović, Goran AU - Tanović, Ljubodrag AU - Puzović, Radovan PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/5401 AB - In the field of mass production, injection molding accounts for a large percentage of the technologies used in the applied technologies. One of the main disadvantages when it comes to injection molding is the cost of tools. This can greatly affect the price of the finished product if there are multiple iterations of product development through various prototypes. For initial tools used in running production or in product design, it is necessary not only to be as cheap as possible, but also to make their production time as short as possible. The increasing application of additive technologies in the field of rapid tooling, gives a wide space in the possibility of lowering the price of the final product. The applicability of additive technologies in injection molding has not been sufficiently researched, although the possibility of application is huge. In this paper, the main emphasis is on the applicability of additive technologies in injection molding of an initial series or a smaller series of the parts. The conclusion is that not only additive technologies can be applied in the production of core and cavity or complex parts of injection molding tools, but the minimum time that is required to produce the tool is significantly reduced, which directly affects the price of the final product. PB - University of Belgrade, faculty of Mechanical Engineering C3 - International Conference of Experimental and Numerical Investigations and New Technologies "CNN TECH 2021" - Book of Abstracts T1 - Applicability of rapid tooling in injection molding application EP - 10 SP - 10 UR - https://hdl.handle.net/21.15107/rcub_machinery_5401 ER -
@conference{ author = "Pjević, Miloš and Popović, Mihajlo and Mladenović, Goran and Tanović, Ljubodrag and Puzović, Radovan", year = "2021", abstract = "In the field of mass production, injection molding accounts for a large percentage of the technologies used in the applied technologies. One of the main disadvantages when it comes to injection molding is the cost of tools. This can greatly affect the price of the finished product if there are multiple iterations of product development through various prototypes. For initial tools used in running production or in product design, it is necessary not only to be as cheap as possible, but also to make their production time as short as possible. The increasing application of additive technologies in the field of rapid tooling, gives a wide space in the possibility of lowering the price of the final product. The applicability of additive technologies in injection molding has not been sufficiently researched, although the possibility of application is huge. In this paper, the main emphasis is on the applicability of additive technologies in injection molding of an initial series or a smaller series of the parts. The conclusion is that not only additive technologies can be applied in the production of core and cavity or complex parts of injection molding tools, but the minimum time that is required to produce the tool is significantly reduced, which directly affects the price of the final product.", publisher = "University of Belgrade, faculty of Mechanical Engineering", journal = "International Conference of Experimental and Numerical Investigations and New Technologies "CNN TECH 2021" - Book of Abstracts", title = "Applicability of rapid tooling in injection molding application", pages = "10-10", url = "https://hdl.handle.net/21.15107/rcub_machinery_5401" }
Pjević, M., Popović, M., Mladenović, G., Tanović, L.,& Puzović, R.. (2021). Applicability of rapid tooling in injection molding application. in International Conference of Experimental and Numerical Investigations and New Technologies "CNN TECH 2021" - Book of Abstracts University of Belgrade, faculty of Mechanical Engineering., 10-10. https://hdl.handle.net/21.15107/rcub_machinery_5401
Pjević M, Popović M, Mladenović G, Tanović L, Puzović R. Applicability of rapid tooling in injection molding application. in International Conference of Experimental and Numerical Investigations and New Technologies "CNN TECH 2021" - Book of Abstracts. 2021;:10-10. https://hdl.handle.net/21.15107/rcub_machinery_5401 .
Pjević, Miloš, Popović, Mihajlo, Mladenović, Goran, Tanović, Ljubodrag, Puzović, Radovan, "Applicability of rapid tooling in injection molding application" in International Conference of Experimental and Numerical Investigations and New Technologies "CNN TECH 2021" - Book of Abstracts (2021):10-10, https://hdl.handle.net/21.15107/rcub_machinery_5401 .