Configuring a class of machines based on reconfigurable 2DOF planar parallel mechanism
2021
Аутори
Vasilić, GoranŽivanović, Saša
Kokotović, Branko
Dimić, Zoran
Milutinović, Milan
Остала ауторства
Mladenović, GoranBalać, Martina
Dragičević, Aleksandra
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The parallel 2DOF (Degrees Of Freedom) mechanism presented in this paper is the basis of many research of the authors. There are many significant results for the presented mechanism, and some of them will be presented in this paper. The main goal of the research regarding the parallel mechanism is to create a hardware and software system that will be used to configure machine tools with three or more DOF. The software system consists of two parts. One part is a set of applications intended for machine analysis and defining optimal configuration, and the other part is a control system of the machine adapted to the hardware of the machine, its configuration and its purpose. For the presented mechanism, the kinematic model of the mechanism will be presented first. Based on the kinematic model, equations representing solutions of kinematic problems will be derived. The derived equations will be in a generalized form with some variable parameters of the machine and in such a form correspond... to every possible configuration of the reconfigurable
mechanism. The equations will initially be used to analyse some basic configurations, and then to analyse some configurations that have not been analysed and presented so far. Also, equations in this form that are applicable for all possible configurations of mechanism, are part of both parts of software system. The final result of the presented procedures is one machine that has optimized parameters in accordance with the appropriate production process and with a configured control system that corresponds to the configuration of the machine.
Кључне речи:
Parallel mechanism / Hybrid mechanism / Complex machine tool / Reconfigurable machine tool / Inverse and direct kinematics problemИзвор:
International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021, 2021, 12-12Издавач:
- Belgrade : Innovation Center of Faculty of Mechanical Engineering
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Vasilić, Goran AU - Živanović, Saša AU - Kokotović, Branko AU - Dimić, Zoran AU - Milutinović, Milan PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/4717 AB - The parallel 2DOF (Degrees Of Freedom) mechanism presented in this paper is the basis of many research of the authors. There are many significant results for the presented mechanism, and some of them will be presented in this paper. The main goal of the research regarding the parallel mechanism is to create a hardware and software system that will be used to configure machine tools with three or more DOF. The software system consists of two parts. One part is a set of applications intended for machine analysis and defining optimal configuration, and the other part is a control system of the machine adapted to the hardware of the machine, its configuration and its purpose. For the presented mechanism, the kinematic model of the mechanism will be presented first. Based on the kinematic model, equations representing solutions of kinematic problems will be derived. The derived equations will be in a generalized form with some variable parameters of the machine and in such a form correspond to every possible configuration of the reconfigurable mechanism. The equations will initially be used to analyse some basic configurations, and then to analyse some configurations that have not been analysed and presented so far. Also, equations in this form that are applicable for all possible configurations of mechanism, are part of both parts of software system. The final result of the presented procedures is one machine that has optimized parameters in accordance with the appropriate production process and with a configured control system that corresponds to the configuration of the machine. PB - Belgrade : Innovation Center of Faculty of Mechanical Engineering C3 - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021 T1 - Configuring a class of machines based on reconfigurable 2DOF planar parallel mechanism EP - 12 SP - 12 UR - https://hdl.handle.net/21.15107/rcub_machinery_4717 ER -
@conference{ author = "Vasilić, Goran and Živanović, Saša and Kokotović, Branko and Dimić, Zoran and Milutinović, Milan", year = "2021", abstract = "The parallel 2DOF (Degrees Of Freedom) mechanism presented in this paper is the basis of many research of the authors. There are many significant results for the presented mechanism, and some of them will be presented in this paper. The main goal of the research regarding the parallel mechanism is to create a hardware and software system that will be used to configure machine tools with three or more DOF. The software system consists of two parts. One part is a set of applications intended for machine analysis and defining optimal configuration, and the other part is a control system of the machine adapted to the hardware of the machine, its configuration and its purpose. For the presented mechanism, the kinematic model of the mechanism will be presented first. Based on the kinematic model, equations representing solutions of kinematic problems will be derived. The derived equations will be in a generalized form with some variable parameters of the machine and in such a form correspond to every possible configuration of the reconfigurable mechanism. The equations will initially be used to analyse some basic configurations, and then to analyse some configurations that have not been analysed and presented so far. Also, equations in this form that are applicable for all possible configurations of mechanism, are part of both parts of software system. The final result of the presented procedures is one machine that has optimized parameters in accordance with the appropriate production process and with a configured control system that corresponds to the configuration of the machine.", publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering", journal = "International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021", title = "Configuring a class of machines based on reconfigurable 2DOF planar parallel mechanism", pages = "12-12", url = "https://hdl.handle.net/21.15107/rcub_machinery_4717" }
Vasilić, G., Živanović, S., Kokotović, B., Dimić, Z.,& Milutinović, M.. (2021). Configuring a class of machines based on reconfigurable 2DOF planar parallel mechanism. in International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021 Belgrade : Innovation Center of Faculty of Mechanical Engineering., 12-12. https://hdl.handle.net/21.15107/rcub_machinery_4717
Vasilić G, Živanović S, Kokotović B, Dimić Z, Milutinović M. Configuring a class of machines based on reconfigurable 2DOF planar parallel mechanism. in International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021. 2021;:12-12. https://hdl.handle.net/21.15107/rcub_machinery_4717 .
Vasilić, Goran, Živanović, Saša, Kokotović, Branko, Dimić, Zoran, Milutinović, Milan, "Configuring a class of machines based on reconfigurable 2DOF planar parallel mechanism" in International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2021 (2021):12-12, https://hdl.handle.net/21.15107/rcub_machinery_4717 .