Stiffener as a special design solution for pressure vessel repair
2022
Autori
Vučetić, TrivunPetrovski, Blagoj
Marković, Zlatan
Jeremić, Lazar
Sedmak, Aleksandar
Milošević, Nenad
Milovanović, Nikola
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Prikazana je popravka posude 970, jer je rizik bio veoma visok, blizu najgoreg slučaja verovatnoće i posledica. Kako položaj greške nije bio pogodan za iskopavanje i reparaturno zavarivanje, odlučeno je da se napravi ukrutni prsten,kako bi se smanjio napon u zavarenom spoju, tako da se i faktor intenziteta napona i neto napon značajno smanjuju.
The reparation of vessel 970 is shown, since the risk is
very high (close to the worst case of both probability and
consequence, being the highest). Since the defect location
was not suitable for digging out and repair welding, it was
decided to make a circumferential stiffener, to reduce the
stress acting on the welded joint, so that both the stress
intensity factor and net stress are reduced significantly.
Ključne reči:
posuda pod pritiskom / ukrutni prsten / zavareni spojevi / reparatura / greška / pressure vessel / stiffener / repair / directIzvor:
Integritet i vek konstrukcija, 2022, 22, 3, 263-266Izdavač:
- Beograd : DIVK
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200213 (Inovacioni centar Mašinskog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200213)
Kolekcije
Institucija/grupa
Mašinski fakultetTY - JOUR AU - Vučetić, Trivun AU - Petrovski, Blagoj AU - Marković, Zlatan AU - Jeremić, Lazar AU - Sedmak, Aleksandar AU - Milošević, Nenad AU - Milovanović, Nikola PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/4279 AB - Prikazana je popravka posude 970, jer je rizik bio veoma visok, blizu najgoreg slučaja verovatnoće i posledica. Kako položaj greške nije bio pogodan za iskopavanje i reparaturno zavarivanje, odlučeno je da se napravi ukrutni prsten,kako bi se smanjio napon u zavarenom spoju, tako da se i faktor intenziteta napona i neto napon značajno smanjuju. AB - The reparation of vessel 970 is shown, since the risk is very high (close to the worst case of both probability and consequence, being the highest). Since the defect location was not suitable for digging out and repair welding, it was decided to make a circumferential stiffener, to reduce the stress acting on the welded joint, so that both the stress intensity factor and net stress are reduced significantly. PB - Beograd : DIVK T2 - Integritet i vek konstrukcija T1 - Stiffener as a special design solution for pressure vessel repair EP - 266 IS - 3 SP - 263 VL - 22 UR - https://hdl.handle.net/21.15107/rcub_machinery_4279 ER -
@article{ author = "Vučetić, Trivun and Petrovski, Blagoj and Marković, Zlatan and Jeremić, Lazar and Sedmak, Aleksandar and Milošević, Nenad and Milovanović, Nikola", year = "2022", abstract = "Prikazana je popravka posude 970, jer je rizik bio veoma visok, blizu najgoreg slučaja verovatnoće i posledica. Kako položaj greške nije bio pogodan za iskopavanje i reparaturno zavarivanje, odlučeno je da se napravi ukrutni prsten,kako bi se smanjio napon u zavarenom spoju, tako da se i faktor intenziteta napona i neto napon značajno smanjuju., The reparation of vessel 970 is shown, since the risk is very high (close to the worst case of both probability and consequence, being the highest). Since the defect location was not suitable for digging out and repair welding, it was decided to make a circumferential stiffener, to reduce the stress acting on the welded joint, so that both the stress intensity factor and net stress are reduced significantly.", publisher = "Beograd : DIVK", journal = "Integritet i vek konstrukcija", title = "Stiffener as a special design solution for pressure vessel repair", pages = "266-263", number = "3", volume = "22", url = "https://hdl.handle.net/21.15107/rcub_machinery_4279" }
Vučetić, T., Petrovski, B., Marković, Z., Jeremić, L., Sedmak, A., Milošević, N.,& Milovanović, N.. (2022). Stiffener as a special design solution for pressure vessel repair. in Integritet i vek konstrukcija Beograd : DIVK., 22(3), 263-266. https://hdl.handle.net/21.15107/rcub_machinery_4279
Vučetić T, Petrovski B, Marković Z, Jeremić L, Sedmak A, Milošević N, Milovanović N. Stiffener as a special design solution for pressure vessel repair. in Integritet i vek konstrukcija. 2022;22(3):263-266. https://hdl.handle.net/21.15107/rcub_machinery_4279 .
Vučetić, Trivun, Petrovski, Blagoj, Marković, Zlatan, Jeremić, Lazar, Sedmak, Aleksandar, Milošević, Nenad, Milovanović, Nikola, "Stiffener as a special design solution for pressure vessel repair" in Integritet i vek konstrukcija, 22, no. 3 (2022):263-266, https://hdl.handle.net/21.15107/rcub_machinery_4279 .