Risk Assessment of Backhoe Loader Downtimes
Само за регистроване кориснике
2022
Аутори
Misita, MirjanaSpasojević Brkić, Vesna
Brkić, Aleksandar
Veljković, Zorica
Perišić, Martina
Papić, Neda
Al Sharif, Abdulghder Mohamed
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Although the biggest advancements could be expected from the mining industry as the
oldest one, it is still a major source of air pollution, there are more people hurt or injured than in
any other industry, while social conflicts around it are worldwide spread. The reason for the lack
of expected progress in the area is the most likely the fact that current research streams vary
barely focus to human and organizational factors, but technology-centered design dominates,
while risk management analysis are rarely applied. The probable reason is proper record keeping.
The aim of this paper is to present the data collected on downtimes of backhoe loaders, to propose
the methodology to be applied and show and analyze results obtained on its down time analysis
and risk management. This research analyzed the structure of downtime and consequences during
a period of one year of two backhoe loader working in mining site in Serbia. Downtimes were
classified as technological downtime, po...wer / electricity downtime, mechanical downtime, misuse
due to abuse, organizational downtime and downtime due to external influences. In this research,
the frequencies of downtime were monitored by the stated categories of downtime. The
consequences of the identified delays were then assessed, and the risk calculated. By analyzing
the types of downtime by systems, it was determined that the priority action measures in order to
mitigate the risk of specific construction machines should be aimed at protecting workers during
technological operations of installing turbines, rear arms and the like. Although mechanical
downtime had the largest share in the risk calculation, the risk map for specific machines clearly
indicates that the technological procedures of assembly and disassembly are the most critical in
terms of risk.
Кључне речи:
Backhoe loader / Risk assessment / Downtime / Probability / ConsequenceИзвор:
International May Conference on Strategic Management – IMCSM22, 2022, 18, 1, 278-286Издавач:
- Bor : University of Belgrade, Technical Faculty, Management Department
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Misita, Mirjana AU - Spasojević Brkić, Vesna AU - Brkić, Aleksandar AU - Veljković, Zorica AU - Perišić, Martina AU - Papić, Neda AU - Al Sharif, Abdulghder Mohamed PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/4192 AB - Although the biggest advancements could be expected from the mining industry as the oldest one, it is still a major source of air pollution, there are more people hurt or injured than in any other industry, while social conflicts around it are worldwide spread. The reason for the lack of expected progress in the area is the most likely the fact that current research streams vary barely focus to human and organizational factors, but technology-centered design dominates, while risk management analysis are rarely applied. The probable reason is proper record keeping. The aim of this paper is to present the data collected on downtimes of backhoe loaders, to propose the methodology to be applied and show and analyze results obtained on its down time analysis and risk management. This research analyzed the structure of downtime and consequences during a period of one year of two backhoe loader working in mining site in Serbia. Downtimes were classified as technological downtime, power / electricity downtime, mechanical downtime, misuse due to abuse, organizational downtime and downtime due to external influences. In this research, the frequencies of downtime were monitored by the stated categories of downtime. The consequences of the identified delays were then assessed, and the risk calculated. By analyzing the types of downtime by systems, it was determined that the priority action measures in order to mitigate the risk of specific construction machines should be aimed at protecting workers during technological operations of installing turbines, rear arms and the like. Although mechanical downtime had the largest share in the risk calculation, the risk map for specific machines clearly indicates that the technological procedures of assembly and disassembly are the most critical in terms of risk. PB - Bor : University of Belgrade, Technical Faculty, Management Department C3 - International May Conference on Strategic Management – IMCSM22 T1 - Risk Assessment of Backhoe Loader Downtimes EP - 286 IS - 1 SP - 278 VL - 18 UR - https://hdl.handle.net/21.15107/rcub_machinery_4192 ER -
@conference{ author = "Misita, Mirjana and Spasojević Brkić, Vesna and Brkić, Aleksandar and Veljković, Zorica and Perišić, Martina and Papić, Neda and Al Sharif, Abdulghder Mohamed", year = "2022", abstract = "Although the biggest advancements could be expected from the mining industry as the oldest one, it is still a major source of air pollution, there are more people hurt or injured than in any other industry, while social conflicts around it are worldwide spread. The reason for the lack of expected progress in the area is the most likely the fact that current research streams vary barely focus to human and organizational factors, but technology-centered design dominates, while risk management analysis are rarely applied. The probable reason is proper record keeping. The aim of this paper is to present the data collected on downtimes of backhoe loaders, to propose the methodology to be applied and show and analyze results obtained on its down time analysis and risk management. This research analyzed the structure of downtime and consequences during a period of one year of two backhoe loader working in mining site in Serbia. Downtimes were classified as technological downtime, power / electricity downtime, mechanical downtime, misuse due to abuse, organizational downtime and downtime due to external influences. In this research, the frequencies of downtime were monitored by the stated categories of downtime. The consequences of the identified delays were then assessed, and the risk calculated. By analyzing the types of downtime by systems, it was determined that the priority action measures in order to mitigate the risk of specific construction machines should be aimed at protecting workers during technological operations of installing turbines, rear arms and the like. Although mechanical downtime had the largest share in the risk calculation, the risk map for specific machines clearly indicates that the technological procedures of assembly and disassembly are the most critical in terms of risk.", publisher = "Bor : University of Belgrade, Technical Faculty, Management Department", journal = "International May Conference on Strategic Management – IMCSM22", title = "Risk Assessment of Backhoe Loader Downtimes", pages = "286-278", number = "1", volume = "18", url = "https://hdl.handle.net/21.15107/rcub_machinery_4192" }
Misita, M., Spasojević Brkić, V., Brkić, A., Veljković, Z., Perišić, M., Papić, N.,& Al Sharif, A. M.. (2022). Risk Assessment of Backhoe Loader Downtimes. in International May Conference on Strategic Management – IMCSM22 Bor : University of Belgrade, Technical Faculty, Management Department., 18(1), 278-286. https://hdl.handle.net/21.15107/rcub_machinery_4192
Misita M, Spasojević Brkić V, Brkić A, Veljković Z, Perišić M, Papić N, Al Sharif AM. Risk Assessment of Backhoe Loader Downtimes. in International May Conference on Strategic Management – IMCSM22. 2022;18(1):278-286. https://hdl.handle.net/21.15107/rcub_machinery_4192 .
Misita, Mirjana, Spasojević Brkić, Vesna, Brkić, Aleksandar, Veljković, Zorica, Perišić, Martina, Papić, Neda, Al Sharif, Abdulghder Mohamed, "Risk Assessment of Backhoe Loader Downtimes" in International May Conference on Strategic Management – IMCSM22, 18, no. 1 (2022):278-286, https://hdl.handle.net/21.15107/rcub_machinery_4192 .